Wfly WFT09SII User manual

INSTRUCTION MANUAL
RADIO CONTROL SYSTEM PCMS 4096
NOTICE
Read the instruction before operation!
V2
PCMS Receiver, Dual MCU, Dual Antenner.Dual circuits
1

INSTRUCTION
Thank you for purchacing product!
SERVICE
1.Retailers to provide free maintenance for six months (apart from
artificial damage)
2. WFLY retailers will always provide life-long maintance
2

CATALOGUE
Contents--------------------------------------------------------------------
Transmitter front-----------------------------------------------------------
Transmitter back-----------------------------------------------------------
Receiver---------------------------------------------------------------------
Trainer function------------------------------------------------------------
Flying safety warnings----------------------------------------------------
Features---------------------------------------------------------------------
Buttons----------------------------------------------------------------------
2.4G Code matching------------------------------------------------------
Adjust the stick head-----------------------------------------------------
C ----------------------------hange the throttle direction of mode1 or 2
1. Model selecting---------------------------------------------------------
2. Model name------------------------------------------------------------
3. Model setting-----------------------------------------------------------
4. ATL-----------------------------------------------------------------------
5. Modulation setting-----------------------------------------------------
6. RF setting---------------------------------------------------------------
7. Swash select------------------------------------------------------------
8. Stick setting-------------------------------------------------------------
9. Adjustment---------------------------------------------------------------
10 e.Res t setting--------------------------------------------------------------
11. Send data--------------------------------------------------------------
12. Receive data----------------------------------------------------------
13. Sound-------------------------------------------------------------------
14. Contrast setting-------------------------------------------------------
About-----------------------------------------------------------------------
Language---------------------------------------------------------------
1. Monitor-------------------------------------------------------------------
2. Dual rate & Exponential-----------------------------------------------
3. Servo reverse-----------------------------------------------------------
4. End point----------------------------------------------------------------
INSTRUCTION
HELICOPTER
SYS SETTING
NORMAL SETTING
08
09
10
11
12
13
14
15
16
17
18
23
24
25
26
27
27
28
29
30
31
32
33
34
35
35
36
37
38
39
40
3

5. Sub trim----------------------------------------------------------------
6. Swash param setting------------------------------------------------
7. Auxiliary channels setting------------------------------------------
8. Throttle curve setting------------------------------------------------
9. Pitch curve setting---------------------------------------------------
10. Revolution mixing---------------------------------------------------
11. Trim step setting-----------------------------------------------------
12. Throttle cut setting--------------------------------------------------
13. Fly model switch-----------------------------------------------------
14. Throttle holding setting---------------------------------------------
15. Fail safe---------------------------------------------------------------
16. TIMER-----------------------------------------------------------------
(1). GYRO sens setting---------------------------------------------
(2). Throttle hovering setting--------------------------------------
(3). Pitch hovering setting------------------------------------------
(4). HI/LO PIT Setting-----------------------------------------------
(5). Trim offset setting----------------------------------------------
(6). DELAY------------------------------------------------------------
(7). Governor mixing------------------------------------------------
(8). Swash and THR mixing----------------------------------------
(9). Cuve setting-----------------------------------------------------
(10). PROG.NOR.MIX1-7------------------------------------------
(17). PROG.CUR.MIX1-4------------------------------------------
(21). Throttle needle mixing---------------------------------------
(22).Code matching----------------------------------------------
INSTRUCTION
ADVANCED
41
42
43
44
46
48
49
50
51
52
53
54
56
57
58
59
60
61
62
63
64
67
68
69
69
4

INSTRUCTION
AIRPLANE
SYS SETTING
1.Model selecting----------------------------------------------------------
2.Model name--------------------------------------------------------------
3.Model setting------------------------------------------------------------
4.ATL------------------------------------------------------------------------
5.AIL-2----------------------------------------------------------------------
6.Modulation setting------------------------------------------------------
7.RF setting----------------------------------------------------------------
8.Stick setting-------------------------------------------------------------
9.Adjustment- ------------------------------------------------------------
10.Reset setting-----------------------------------------------------------
11.Send data--------------------------------------------------------------
12.Receive data----------------------------------------------------------
13.Sound------------------------------------------------------------------
14.Contrast setting--------------------------------------------------------
About-----------------------------------------------------------------------
Language------------------------------------------------------------------
NORMAL SETTING
1.Monitor-------------------------------------------------------------------
2.Dual Rate & Exponential Setting-------------------------------------
3.Servo Reverse----------------------------------------------------------
4.End Point----------------------------------------------------------------
5.Sub Trim-----------------------------------------------------------------
6.Auxiliary Channels Setting-------------------------------------------
7.Throttle Curve Setting------------------------------------------------
8.Trim Step Setting-------------------------------------------------------
9.Flaperon-----------------------------------------------------------------
10.Flap Trim---------------------------------------------------------------
11.Ail-diff-------------------------------------------------------------------
12.Elev-flap---------------------------------------------------------------
73
74
75
76
77
78
79
80
81
82
83
84
85
85
85
86
87
88
89
90
91
92
94
95
96
97
98
5

INSTRUCTION
13.Throttle Cut Setting--------------------------------------------------
14.Idle Down--------------------------------------------------------------
15.Fail Safe---------------------------------------------------------------
16.Timer-------------------------------------------------------------------
17.Advanced--------------------------------------------------------------
(1).curve Setting----------------------------------------------------------
(2)-(8).PROG.NOR.MIX1-7----------------------------------------------
(9)-(12).PROG.CUR.MIX1-4--------------------------------------------
(13).Air Brake--------------------------------------------------------------
(14).Elevon-----------------------------------------------------------------
(15).Ailvator----------------------------------------------------------------
(16).V-tail-------------------------------------------------------------------
(17).Snap-roll--------------------------------------------------------------
(18).Delay------------------------------------------------------------------
(19).Throttle Needle Mixing---------------------------------------------
(20).Gyro Sens Setting---------------------------------------------------
(21).Code matching---------------------------------------------------
ADVANCED
GLIDER
SYS SETTING
1.Model Selecting-----------------------------------------------------------
2.Model Name----------------------------------------------------------------
3.Model Setting--------------------------------------------------------------
4.Atl----------------------------------------------------------------------------
5.Ail-2--------------------------------------------------------------------------
99
100
101
102
103
105
106
107
108
109
110
111
112
113
114
115
115
119
120
121
122
123
124
6
6.Modulation Setting---------------------------------------------------- -

NORMAL SETTING
1.Monitor---------------------------------------------------------------------
2.Dual Rate & Exponential Setting—------------------------------------
3.Abk. Curve Setting-------------------------------------------------------
4.Servo Reverse------------------------------------------------------------
5.End Point------------------------------------------------------------------
6.Sub Trim-------------------------------------------------------------------
7.Auxiliary Channels Setting---------------------------------------------
8.Trim Step Setting---------------------------------------------------------
9.Flaperon-------------------------------------------------------------------
10.Flap Trim------------------------------------------------------------------
11.Ail-diff---------------------------------------------------------------------
12.Elev-flap-----------------------------------------------------------------
13.Fail Safe------------------------------------------------------------------
14.Timer---------------------------------------------------------------------
15.Advanced-----------------------------------------------------------------
7.RF Setting--------------------------------------------------------------- -
8.Stick Setting--------------------------------------------------------------
9.Adjustment--------------------------------------------------------------
10.Reset Setting-----------------------------------------------------------
11.Send Data---------------------------------------------------------------
12.Receive Data-----------------------------------------------------------
13.Sound--------------------------------------------------------------------
14.Contrast Setting--------------------------------------------------------
About----------------------------------------------------------------------
Language---------------------------------------------------------------------
INSTRUCTION
(1).Curve setting---------------------------------------------------------
(2)-(8).PROG.NOR.MIX1-7---------------------------------------------
(9)-(12).PROG.CUR.MIX1-4--------------------------------------------
(13).butterfly----------------------------------------------------------------
(14).elevon-----------------------------------------------------------------
(15).ailvator----------------------------------------------------------------
(16).V-TAIL-----------------------------------------------------------------
(17).Start OFS-------------------------------------------------------------
(18).Speed OFS-----------------------------------------------------------
(19).Code matching-----------------------------------------------------
ADVANCED
124
125
126
127
128
129
130
131
131
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
148
149
150
151
152
153
154
155
156
156
7

Contents
Thank you for your attention and support to WFLY radio!
WFLY promises every WFT09S radio control system include the
following contents:
1. 4096 transmitter
2. Battery holder for transmitter
3. Neckstrap
4. WFR09S 2.4GHz 9 channel receiver PCMS
5.Li-po Voltage Regulation
INSTRUCTION
8

Contents
1. Transmitter
INSTRUCTION
4.Li-po Voltage
Regulation
2. Transmitter battery
holder
3. Neckstrap
5. WFR09S 2.4GHz
9ch receiver
9

Antenna
Alarm light
RF light
VC
Switch F
Trainer switch
Switch D
Switch E
VR
Buzzer
Neckstrap attachment
LCD
OK
/Down
/Right
Up
Left
Aileron trim
Power switch Throttle trim
Aileron/throttle stick
Decrease
Menu
Exit
Increase
Rudder trim
Elevator trim
Rudder/elevator
stick
VL
Switch B
Switch A
Switch C
VA
VB
Power light
Charge hole
TRANSMITTER
MODEL NO.:
MODULATION: PPM, PCMS 1024, PCMS 4096
OUTPUT POWER: ≤100mW
POWER SUPPLY: 9.6-12V
CURRENT DRAIN: 250mA
Band: 2.4GHz
TRANSMITTER FRONT
INSTRUCTION
1 0

TRANSMITTER BACK
Battery cover
DSC
INSTRUCTION
1 1

WFR09S 9 Channels Receiver (PCMS)
1．AIL：Aileron (Channel 1)------------------------
2．ELE：Elevator (Channel 2)----------------------
3．THR：Throttle (Channel 3)-----------------------
4．RUD：Rudder (Channel 4)-----------------------
5．GYR：Landing Gear/Gyro (Channel 5)---------
6．PIT：Pitch (Channel 6)------------------------------ -
7．AUX1：Auxiliary channel 1 (Channel 7)---------
8．AUX2：Auxiliary channel 2 (Channel 8---------
9．Power：Input +4.8-6V-----------------------------
(There are 9 rows needles, 3 needles in each row,
from the top needle to the bottom, the 3 needles are PCMS/PPM pulse, +5V and Ground.)
This receiver has Fail safe function.
INSTRUCTION
RECEIVER Resolution 4096(with PCMS 4096 modulation)
2.4GHz 9 Channels receiver
Dual MCU, Dual antenna, Dual circuits,Resolution 4096 receiver
MODEL NO.: WFR09S
TYPE: 9 CH PPM /PCMS 1024/PCMS 4096
BAND: 2.400-2.483GHz
POWER SUPPLY: 4.8-6V
RECEIVER SENSITIVITY:-97dBm
WEIGHT: 14.8 g
DIMENSION: 44.8mm x27.9mm x16.39mm
Characteristic
Can effectively select the best signal
Enhance the reliability
Improve the response speed
;
Enhance the anti-interference
Increased range of use
1 2

Trainer function
Two WFT09SII transmitters can transfer data and realize trainer function.
Setting Method:
1).Data transfer function: use Trainer cable/Data transfer cable to
connect two WFT09SII transmitter.
Select “Send data/receive data” in SYS setting to transfer the data.
2).Trainer function: use Trainer cable/Data transfer cable to connect
two WFT09SII transmitters.
Insert RF module to the trainer transmitter, student transmitter
doesn’t insert the RF module.
Pull Trainer switch for student transmitter operating. If any wrong
operation occurs, trainer pushes trainer switch and student
transmitter stops sending signal, trainer transmitter controls the
aircraft.
INSTRUCTION
1 3

FLYING SAFETY WARNINGS
Dangers：If you use it without proper operation, it is possible to hurt
you seriously or may even cause death.
Warnings：If you use it without proper operation, it may make you or
others to hurt badly or may even cause death, and it may
cause slight hurt or damage to things.
Notices：If you use it without proper operation, it may cause you to
hurt slightly or damage things , but it won't hurt you seriously
normally.
Special Symbol Instruction
Forbiddance! Obligation! Warning!
Flying Notice(warning)
Do not fly at night , in rain day ,or in strong wind,
which will damage the device or plane. This device
is not water-proof.
Please check every servo works properly and eliminate
any disturbing signals before you play it.
Notices: Turn on the transmitter first, then the receiver. When turning
off the system, turn off the receiver first, then the transmitter.
Notices：Children under 14 must be accompanied and instructed by
adults!
To use the product safely, please pay attention to the instruction
as follows.
Please pay special attention to the symbol as follows:
INSTRUCTION
changes or modifications not expressly approved by the
party responsible for compliance could void the user's
authority to operate the equipment.
Notices:
1 4

FEATURES
Computerized transmitter
High Speed, High Resolution, optimized 2.4GHz PCMS 4096
Convenient stick adjustment, make you free usage
Tree-like Multilayer Menu, human oriented design
Excellent white LED backlight, less visual tiredness
132 X 64 FSTN LCD, easy operating buttons
85 model memory
10 point curve(in any X and Y direction edition)
Easy complex curve adjustment
Different Sub trim adjustment sound, easy identify the center
Data transfer function, easy teaching and learning
Multi-function, intuitive data setting, easy checking
Tightness and length of the control stick can be adjusted freely
Excellent touch of the stick movement
3 independence timer, all can be set to count down or increment
INSTRUCTION
1 5

MENU
Menu button brings you to the function list of the transmitter.
EXIT
Exit button is to back the previous menu or exit edit.
+
This button is to increase the value. If you press it for a while,
the increasing speed will be faster.
-
This button is to decrease the value. If you press it for a while,
the decreasing speed will be faster.
Cursor buttons
Move the cursor.
OK
The button in the middle of the direction buttons is the OK button.
The function is as follows:
To enter the function list.
To enter the edit function.
To back the default for long time press.
Buttons
INSTRUCTION
1 6

INSTRUCTION
2.4 G sys tem can aut oma tically r eco gnize WFL Y PCM s and PPM.
WFLY 2.4GHz Operation instructions
2. Fai l Safe Setting
A.Power on receiver.
B.Press Set of the module then start transmitter and hold SET for 2 seconds. The green LED
flashes, indicating the transmitter enters the code matching status.
C. The Green LED of receiver flashes, the output data of transmitter is the data of Fail Safe Setting
of the receiver.
D. Due to the heavy interference or out of normal range, the receiver enters FailSafe. The Red
LED of the receiver lights when it is in Fail Safe status.
Code matching
Description
This function is useful under the situation
when the transmitter need to be match
and bind with
receiver.
setting
Enter "normal settings" and choose
"advanced", use up and down key to
choose coding, press ok
to select. The screen will display "OK:
Cancel". Set your receiver to coding
mode, and use up or down button to
choose Ok and then press OK button.
The screen will display "Coding wait.."
Code matching will be succeeding after
the receiver back to normal mode.
1.
1 7

Allen key
Top thread
Steps:
1 Put the stick head on the stick.
2 Put the top thread in the stick head with allen key.
3.Addjust top thread in the stick head with allen key to fix the height of the
stick head.
Adjust the stick head:
Stick head
INSTRUCTION
Adjust the height higher: frist
make the top thread loose with
the allen key, then twist the stick
head up, then, make the top
thread tighten with allen key, Ok,
the stick head was turned up.
Adjust the height lower:
frist make the top thread
loose with the allen key, then
twist the stick head down,
then, make the top thread
tighten with allen key, Ok,
the stick head was turned
down.
Twist the top thread
down from here, the
height of the stick head
depends on the depth
of the top thread.
Pu t th e s t i ck h e ad c o ver the control rod on
th e le ft a n d r i g ht s i des,don't twist do w n t h e
st i c k h e a d t o th e b o t tom, and t hen p ut t o p
th r e ad w i th a l len k ey t o adjust the height
yo u ne ed.
Stick
1 8

Bolt 1
Bolt 2
Bolt 3
Bolt 4
change the throttle direction of mode1 or 2:
Take the metal chip and
the screw down, and put
it on the similar position
of the right side .
Set up release link and
springer, according your habit
to addjust the the tightness of
screw 2 to adjust the control
feeling.
Take repositor and spring down, and
put it on the left side of the location
of corresponding.then twist bolt 1
down until withstand the adjust nail
in case adjust nail will move away.
Put on the metal chip, according
your habit to adjust the elasticity
of screw 3 and screw 4 to adjust
the damp of throttle control
feeling.
INSTRUCTION
1 9

HELICOPTER
Press Menu and turn on the transmitter to enter SYS SETTING.
Select MODEL SETTING, press OK button to select the model
type.
Restart the transmitter after setting.
INSTRUCTION
HELICOPTER
2 0