Whittier Wood Furniture Shaker 1408AFVCL User manual

P.O. Box 2827
Eugene, OR 97402 USA
Outside U.S. or Canada: 541- 687- 0213Outside U.S. or Canada: 541- 687- 0213
800-653-3336800-653-3336
Fax: [phone] • Fax: [phone] • wwwwww.whittie.whittierrwood.comwood.com
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.AMail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A
For normal household use only.
recommended for commercial use.
Congratulations!
Production Code:
Assembly Instructions
Shaker
Full Storage Bed
1408AFVCL
Candelite Finish
VN
Service Policy: We will replace parts
which are defective, missing or damaged.
Please contact Whittier Wood Products
customer service department directly (by
phone, fax, mail or E-mail) for replacement
parts.
Hours: Our friendly customer service staff
can be reached Monday-Friday 7:00 a.m. to
5:00 p.m. (Pacific Time). A message can be
left 24 hours a day, 7 days a week.
To Order: Provide the complete furniture
model number, part letter, production code,
quantity needed, reason for replacement
and your full name and address along with
a telephone number in case we need to
contact you.
Parts ship from our Eugene, Oregon factory
within 1 or 2 business days from the time
we receive the request. Please allow 5-10
business days for delivery.
This fine piece of furniture will make a handsome
addition to your home. For the best results, start by
reading the Assembly Instructions before you begin
your project.
Unload items from this unit prior to moving.
Before loading or moving this unit, check all screws
and supports for tightness.
Store the item: 1) in the box; 2) in a dry place; 3) in
temperatures ranging from 40° to 90°. (Not on a cold,
possibly damp, cement floor.)
Inspect your furniture periodically for any loose glue
joints or screws, or any other problem which may be
affecting the stability of your furniture. Tighten or repair
as needed.
This Assembly requires two people.
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
05/08

1408AFVCL Shaker Full Storage Bed — Parts List
1410AFVCL (x1)
1401AFVCL (x2)
If you need to replace a part, please refer to the following list for part name and number.
Page 2 — 1408AFVCL — 05/08
F — 1/4" x 3-3/8" Hex Bolt
— Qty. 12
G — 1/4" x 1-¾" Hex Bolt
— Qty. 8
E — #8 x 1-¼" Black Screw
— Qty. 24
H — Washer — Qty. 20
N — #8 x 1½" Machine Screw
— Qty. 6 O — Knob — Qty. 6
I — Pedestal Kit — Qty.1
A — Headboard — Qty.1
B — Footboard — Qty.1
C — Trestle — Qty.4
D — Insert Nuts — Qty.12
(Pre-Inserted)
Q — Drawer Slides — Qty. 6
(Pre-Installed sets)
J — Drawer Box — Qty. 6
L — Drawer Face — Qty. 6
P— Deckboard — Qty.1

1408AFVCL Shaker Full Storage Bed
Assembly Instructions
Page 3 — 1408AFVCL — 05/08
TOOLS REQUIRED:
This Assembly Requires Two People
Phillips Screwdriver, 7/16" wrench and tape measure.
Remove the Trestles (C) from the back of the Headboard (A) as seen in Fig. 1
and place them off to the side.
1.
Place both Pedestals (I) approximately 57" apart as shown in Fig. 2.2.
Fig. 1
Fig. 2
Shipping Straps
I
I
57"
A
C

Remove the Drawers from the Pedestals (I). Note where each drawer comes from
for easy re-installation. (Positions are also marked on the back of each drawer.)
3.
Place 4 Trestles (C) in between Pedestals and insert 1-¾" Hex Bolt (G) and
washer (H) as shown in Fig. 4b. Finger tighten only.
4.
Fig. 4b
G x 8 H x 8
F x 6 H x 6
CCCC
H
G
F
H
Fig. 4
Assemble the Footboard (B) to the Pedestal Assembly as shown in Fig. 5. using
1/4" x 3-3/8" Hex Bolt (F) and Washer (H).
5.
Fig. 5
B
Page 4 — 1408AFVCL — 05/08

Repeat step 5 to assemble the Headboard (A) to the Pedestal Assembly as shown
in Fig. 6.
6.
Securely tighten all bolts on Trestles.7.
Place Deck Boards (P) as shown in Fig. 7. There should be a small gap between
each Deckboard. Secure with #8 x 1¼" Screw (E).
8.
Carefully align each Drawer and gently push them back into their original
positions. Sleep well, and enjoy!
9.
Fig. 6
Fig. 7
E x 24
A
P
F x 6 H x 6
Page 5 — 1408AFVCL — 05/08
F
H