Whittier Wood 1554AEGAC User manual

1556AEGSP
1556AECAF
84" x 48"
1554AEGSP
1556AEGAC1554AEGAC
1554AECAF
72" x 48"
Assembly Instructions
48" Wide McKenzie Alder Bookcases:
72"+ 84"h
Production Code:
02/10
P.O. Box 2827
Eugene, OR 97402 USA
Congratulations!
This fine piece of furniture will make a gorgeous
addition to your home. For the best results, read the
Assembly Instructions before you begin your project.
Before you begin your project, completely read the
Assembly Instructions.
For normal household use only. Not recommended
for commercial use.
Do not climb, sit or stand on this piece of furniture.
Store this item: 1- in its box; 2- in a dry place; 3- in
temperatures that range from 40°F to 90°F (not on
a cold and possibly damp cement floor).
Periodically inspect your furniture for any loose
glue joints, screws or any other problem that might
affect the stability of your furniture. Tighten or
repair as needed.
IMPORTANT NOTES:
Service Policy: We will replace any part that is
defective, missing or damaged during assembly.
Please contact Whittier Wood Products customer
service department directly by phone, fax, mail or
email for a replacement part.
CALL US FIRST! Do not return this item to the store.
800-653-3336 • Outside the U.S. or Canada: 541-687-0213 • Fax: [phone]
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Hours: Our friendly customer service staff can be
reached Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific
Time). You may leave a message 24 hours a day,
seven days a week.
AEGAC = Glazed Antique Cherry finish; AEGSP = Glazed Spice finish;
AECAF = Caffè finish
To Order: Designate the finish, provide the furniture
model number found underneath the unit, the part letter,
production code, quantity needed, reason for replacement,
your full name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one
or two business days from the time we receive your
request. Please allow five to ten business days for delivery.

Page 2 — 1554_1556AEGAC_AEGSP_AECAF — 02/10
D — Top — Qty. 1 (attached)
A — Adjustable Shelf
TR — Tipping
Restraint — Qty. 2
F — Tack Glide
— Qty. 2 (inserted)
G — #8 x 1" Pan Head Screw
— Qty. 8 (inserted)
1554AEGSP
1554AECAF
Model #
Qty. 8
}
}
}
}
1556AEGSP
1556AECAF Qty. 10
1554AEGSP
1554AEGAC 1554AEGAC
1554AECAF
Qty. 32
1556AEGSP
1556AEGAC 1556AEGAC
1556AECAF
Qty. 40
}
}
1554AEGSP
1554AEGAC
1554AECAF
Qty. 32
1556AEGSP
1556AEGAC
1556AECAF
Qty. 40
B — Shelf Bracket
Model # Model #
Before you begin to assemble this unit, identify each part and
make sure the quantities received match what is on this list.
If you need to replace a part, please refer to the following list for the part name and letter code.
C — #6 x 1/2" Undercut Screw
I — Small Adjustable Glide
— Qty. 2 (inserted)
H — Nylon Insert
— Qty. 2 (inserted)
1554AEGSP shown
A
D
A
A
A
Tools required: Phillips screwdriver
1.
To move the adjustable shelves:
Determine where you want to place the Adjustable Shelves (A). Remove the #6 x 1/2" Undercut
Screws (C) from the underside of the shelf and take out the Shelf and Shelf Brackets (B). Insert
the Shelf Brackets (flat side down) into the four different holes and insert the shelf. You may
secure them by inserting #6 x 1/2" Undercut Screws (C).
2. When you have determined the location for your unit, install the Furniture Tipping Restraints (TR).
Carefully follow the instructions inside the packages. If you cannot locate two studs, purchase the
proper tipping restraint for your type of wall and install.
Glazed Antique Cherry finish (AEGAC) &
Glazed Spice finish (AEGSP) & Caffè finish (AECAF)
48" Wide McKenzie Alder Bookcase — Parts List