Whittier Wood 7000GDRC User manual

P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 09/11
Northgate
Nightstand
Glazed Dark Chestnut Finish
Assembly Instructions
Congratulations!
This fine piece of furniture will make a gorgeous addition to
your home. For the best results, read the Assembly
Instructions before you begin your project.
IMPORTANT NOTES:
•For normal household use only. Not recommended to
use this product in a commercial setting.
•Do not climb, sit or stand on this piece of furniture.
•Do not overload the drawers.
•Unload items before you move this unit.
•Before you load or move this unit, tighten all screws
and supports.
•Before you begin your project, completely read the
Assembly Instructions.
•Store this item: 1- in its box; 2- in a dry place; 3- in
temperatures that range from 40°F to 90°F (not on a cold
and possibly damp cement floor).
•Periodically inspect your furniture for any loose glue
joints, screws or any other problem that might affect the
stability of your furniture. Tighten or repair as needed.
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CALL US FIRST! Do not return this item to the store
Service Policy: We will replace any part that is defective,
missing or damaged during assembly. For a replacement
part, phone, fax, mail or email your request to the Whittier
Wood Products customer service department.
Hours: Our friendly customer service staff can be reached
Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific Time). You
may leave a message 24 hours a day, seven days a week.
To Order: Provide the finish and furniture model number
(upper portion of this page), the part letter, production
code, quantity needed, reason for replacement and your
full name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one or
two business days from the time we receive your request.
Please allow five to ten business days for delivery.
800-653-3336 • Outside the U.S. or Canada: 541-687-0213 • Fax: [phone]
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Model #
7000GDRC
Small 3-Drawer
Nightstand
Model #
7001GDRC
3-Drawer
Ni
g
htstand

7000GDRC and 7001GDRC Northgate Nightstand
Parts List
7000GDRC_7001GDRC — Page 2 — 09/11
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and part name.
Quantity
Part Description 7000 GDRC 7001 GDRC
A Top Assembly 1 1
B Case 1 1
C Small Drawer Box (inserted) 1 1
D Medium Drawer Box (inserted) 1 1
E Large Drawer Box (inserted) 1 1
F Small Drawer Face (installed) 1 1
G
Medium Drawer Face (installed) 1 1
H Large Drawer Face (installed) 1 1
I
Insert Nut (inserted) 4 4
J
Small Adjustable Glide (installed) 4 4
K Pull (attached) 3 3
L M4 x 25mm Machine Screw (installed) 6 6
M Drawer Slides (pre-installed sets) 3 3
N #6 x 1/2" Philtruss Screw (inserted) 18 18
O #6 x 3/4" Philtruss Screw (inserted) 18 18
P #8 x 1" Lo-Profile Screw (inserted) 12 18
Q #8 x 1-1/4" Pan Head Screw (inserted) 9 9
7001GDRC shown in the illustrations.
Assembly Instructions
1. Place the unit at its final destination. Rotate the Small Adjustable Glides (J) on the bottoms of
the legs until the unit is level. See Figure 1.
Fig. 1
J J