Wildridge LCC-153 User manual

Assembly Instructions
© 2017
LCC-153
Dining
Chair
Step 1
Lay seat assembly (A) upsidedown
and fasten leg (C) where shown on
picture with (2) 2” screws. Fasten
other leg (C) on otherside in the
same manner.
Required Tools:
- Hammer
- 7/16” Wrench or Socket
- Cordless Drill
- #2 Square Drive bit
- Tape Measure
Hardware:
- (16) 2” Screws
- (4) 1 1/4” Screws
A
Step 2
Lay Seat assembly on side and posi-
tion back (B) as shown with back
board all the way down against
seat support and fasten with (2) 2”
screws. repeat otherside.
Step 3
Lay chair on back, fasten leg support
(D) keeping ush on inside of leg 2
3/4” up use other support as guide.
Fasten with (4) 2” screws repeat
other side.
Step 4
Now fasten cross
support in center as
picture shows and
fasten with (4) 1
1/4” screws. Note:
you can not use 2”
screws here.
BD
C
Complete
without
Armrests
Please turn
over for
instructions
on optional
armrests.

Assembly Instructions
© 2017
LCC-154 Dining
Chair With Arms
Step 1
Positioning armrest supports where shown and fasten
with (2) 2 1/2” screws through predrilled holes, repeat
on other side.
Step 2
Fasten armrest to back with 3 1/4” bolt and nut. Then
fasten front from bottom up with (2) 1 1/4” screws as
shown, repeat on other side.
www.wildridge.com
330-893-4212
Hardware for Armrests:
- (2) 1/4” x 3 1/4” carriage bolts
- (2) 1/4” Flanch nuts
- (4) 2 1/2” Screws
- (4) 1 1/4” Screws
Complete!