Wildridge LCC-314 User manual

ASSEMBLY INSTRUCTIONS
CONTEMPORARY
ADIRONDACK CHAIR
330-893-4212 • www.wildridge.com
LCC-314
© 2022
Required Tools:
- Mallet/Non-Marring Hammer
(DO NOT Use Metal Headed Hammer)
- 7/16" Wrench or Socket
- Cordless Drill
- #2 Square Drive bit
Hardware:
- (2) 1/4” x 3 1/2” bolts
- (8) 1/4” x 2 1/4” bolts
- (10) 1/4” ange nuts
- (8) 1 1/4” screws
- (4) 2” screws
Parts
A = (1) Back
B = (1) Seat
C = (2) Legs
D = (1) Brace
E = (2) Armrests
Step 1
Using (2) 1/4" x 2 1/4" bolts and (2) 1/4" ange nuts attach seat (B)
to back (A). Repeat on other side.
Step 2
Using (2) 1/4" x 2 1/4" bolts and (2) 1/4" ange nuts attach legs (C)
to seat, as shown. Repeat on other side.
A
B
C
E
D

ASSEMBLY INSTRUCTIONS
CONTEMPORARY
ADIRONDACK CHAIR
330-893-4212 • www.wildridge.com
LCC-314
© 2022
Step 3
Now slide brace (D) in groove in front legs and fasten with (4) 2"
screws, two on each end.
Step 5
On the front of the armrest measure a 3/4” overhang on the inside
as shown left, fasten the armrest using (4) 1 1/4" screws in the pre-
drilled holes from the bottom up. Repeat on other side.
Step 4
Attach the armrest (E) to the back with (1) 1/4" x 3 1/2" bolts
and (1) 1/4" flange nuts. Repeat on other side.
Step 6
Your chair is complete... enjoy!
Thank you for purchasing from Wildridge.