Wildridge Tete-a-Tete LCC-229 User manual

Assembly Instructions
© 2017
LCC-229 Deck Chair Tete-a-Tete
Step 1
LCC-229 Deck Chair Tete-a-Tete consists
of (2) LCC-252 Dining-Deck Chairs
with only (1) arm per chair.
Refer to LCC-252 Dining-Deck Chair Manual (see
attached LCC 252 assembly instructions).
Installing (1) armrest on right side of (1) chair
and (1) armrest on left side of other chair.
Now place side by side as shown and fasten
back of table with (2) 2 1/2" bolts & nuts.
Now bring the front of chairs in against table
cleats and fasten from bottom up into table with
(6) 1 1/4" screws, 3 per side.
COMPLETE!
©2017
www.wildridge.com
330-893-4212

Assembly Instructions
© 2017
www.wildridge.com
330-893-4212
LCC-252 Classic Dining/Deck Chair
Step 1
Lay seat (A) on side and attach front leg (B) and back
leg (C) as shown with (4) 2 1/2” Bolts and nuts.
Note: Be sure to position front leg (B) as shown with
arm block on top pointing away from seat. Repeat other
side.
Step 2
Now position back (D) on back legs as shown and fasten
with (6) 2” Screws.
E
Required Tools:
-Hammer
-Cordless Drill
-#2 Square Drive Bit
-7/16“ Wrench or Socket
Hardware:
- (10) 1/4” x 2 1/2” Bolts
- (10) 1/4” Flange Nuts
- (10) 2” Screws
- (6) 1 1/4” Screws
A D B
C

Assembly Instructions
© 2017
www.wildridge.com
330-893-4212
LCC-252 Classic Dining/Deck Chair
Step 3
Fasten armrests (E) to chair with (2) 2 1/2” bolts and
nuts in back and (6) 1 1/4” screws in front from bottom
up through arm blocks and holes provided (3 per arm).
Divide space evenly on each side.
Step 4
For added strength add (4) 2” screws on inside of front
legs, (2) screws per leg.