WillowWood LimbLogic User manual

LimbLogic® Quick-Start Guide
3. To enter Standby Mode:
4. Turn o the Vacuum Pump.
1. Turn on the Vacuum Pump.
Press and hold until digits
flash in “chasing” pattern.
Fob displays current vacuum
level. Pump will operate until
preselected vacuum level
has been reached.
Press for approximately 2
seconds. Chasing pattern
will be displayed as pump
returns to Active Mode.
Press for approximately 2
seconds. Chasing pattern
will be displayed, then
Standby Indicator will light.
Press one time.
Pump will beep once.
Wait 10 seconds.
Press one time.
Pump will beep twice.
To resume vacuum regulation:
2. Turn on the fob.

PN-2015-F
22 JAN 2013
The Ohio Willow Wood Company
15441 Scioto Darby Road
Mt. Sterling, OH 43143
phone [phone]
fax [phone] www.willowwoodco.com
Ohio Willow Wood Company B.V
Keizersgracht 62/64
1015 CS Amsterdam
The Netherlands
Current
Vacuum
Level
Bilateral Indicators
Standby
Indicator
(White)
Leak
Indicator
(Red)
Up
Enter
Down
Fob Guide
Vacuum Pump Battery Indicator
50-100%
30-50%
20-30%
< 20%
Refer to full manual for complete instructions.