Wimius P62 User manual
P62 PROJECTOR
USER MANUAL
EN
1
EN
DE
FR
IT
ES
JP
English
Deutsch
Français
Italiano
Español
日本語
P01-26
P27-52
P53-78
P79-104
P105-130
P131-157
Table of Contents
Safety Precautions
Accessories
Product Overview
Remote Control and Spec
Projection Size Chart
Operating Instructions
Connecting with Smartphones and iPad
Connecting with Bluetooth Speaker
Other Connections
Main Menu Function
FAQ and Contact
02
03
05
08
09
1 0
1 4
1 6
1 7
20
25
EN EN
2 3
Thank you for your purchase with WiMiUS P62 video projector. Please read this manual carefully before using the
projector.
We sincerely hope this projector can make your life more colorful.
High brightness lamp! Don't look straight into the lens when the projector is on.
• Projector x 1
• Projector Case x 1
• Remote Control x 1
• Power Cable x 1
• AV Cable x 1
1. Clean
When clean this projector, please pull out the power cable. Use a wet cloth to clean, don’t use any detergent that
may damage the unit.
2. Accessory
Please use our recommended accessory. Or it will damage the projector.
3. Correct environment
Do not place the projector in a wet environment, like damp basement or near the swimming pool, etc.
4. Ventilation
The ventilation is equipped for the projector to work stably. Do not put anything around the vents. Or it will cause the
projector heating up. To ensure the stability of heat dissipation, please open the height bracket in the bottom of the
projector before starting.
Warnings
Safety Precautions
Accessories
5. Power
Please make sure the power is within the required power range.
6. Thunder
For thunder day, please unplug the power cable from the projector.
7. Repair
Due to high voltage inside, please do not open or try to repair the projector by yourself. Please ask a professional
technician to repair the projector.
8. Keep away from heat device
Please make sure the projector is far away from any heat devices which will damage the projector.
• HDMI Cable x 1
• Lens Cover x 1
• Cleaning Kit x 1
• User Manual x 1
EN EN
2 3
Thank you for your purchase with WiMiUS P62 video projector. Please read this manual carefully before using the
projector.
We sincerely hope this projector can make your life more colorful.
High brightness lamp! Don't look straight into the lens when the projector is on.
• Projector x 1
• Projector Case x 1
• Remote Control x 1
• Power Cable x 1
• AV Cable x 1
1. Clean
When clean this projector, please pull out the power cable. Use a wet cloth to clean, don’t use any detergent that
may damage the unit.
2. Accessory
Please use our recommended accessory. Or it will damage the projector.
3. Correct environment
Do not place the projector in a wet environment, like damp basement or near the swimming pool, etc.
4. Ventilation
The ventilation is equipped for the projector to work stably. Do not put anything around the vents. Or it will cause the
projector heating up. To ensure the stability of heat dissipation, please open the height bracket in the bottom of the
projector before starting.
Warnings
Safety Precautions
Accessories
5. Power
Please make sure the power is within the required power range.
6. Thunder
For thunder day, please unplug the power cable from the projector.
7. Repair
Due to high voltage inside, please do not open or try to repair the projector by yourself. Please ask a professional
technician to repair the projector.
8. Keep away from heat device
Please make sure the projector is far away from any heat devices which will damage the projector.
• HDMI Cable x 1
• Lens Cover x 1
• Cleaning Kit x 1
• User Manual x 1
EN EN
4 5
Projector x 1
Remote Control x 1 Power Cable x 1 AV Cable x 1 HDMI Cable x 1
Lens Cover x 1 Cleaning Kit x 1 User Manual x 1 Projector Bag x 1
Product Overview
Projector can input high-denition video signal and composite video signal, and support stereo audio signal input
and output. Please refer to the following gure to connect the projector and other audio equipment according to
your own needs.
4. Air outlet
5. 6.Power socket Air inlet
1. 2.
3.
Focus Lens IR receiver
Auto Focus
signal window
7.
8.
9.
10.
1 1.
12.
13.
Speaker (left)
USB ports
HDMI ports
AV port
3.5mm audio output
IR receiver
Speaker (right)
EN EN
4 5
Projector x 1
Remote Control x 1 Power Cable x 1 AV Cable x 1 HDMI Cable x 1
Lens Cover x 1 Cleaning Kit x 1 User Manual x 1 Projector Bag x 1
Product Overview
Projector can input high-denition video signal and composite video signal, and support stereo audio signal input
and output. Please refer to the following gure to connect the projector and other audio equipment according to
your own needs.
4. Air outlet
5. 6.Power socket Air inlet
1. 2.
3.
Focus Lens IR receiver
Auto Focus
signal window
7.
8.
9.
10.
1 1.
12.
13.
Speaker (left)
USB ports
HDMI ports
AV port
3.5mm audio output
IR receiver
Speaker (right)
EN EN
6 7
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
1 1.
Signal source
Up
Return
Left
Right
Down
Power Button
OK
Level-stand adjustment (to adjust
projection angle)
Projector mount holes (M5*16mm)
Bottom case (open to clean the internal
screen)
Note: For Ceiling mount, please slowly remove the 4 black rubbers, then you can nd the holes for ceiling mount.
The screw size is M5*16mm.
How to clean the Black Spots?
Open the dusting mouth cover rotation with a screwdriver.
Method 1 Method 2
Use the cold wind to blow the dusting mouth.Extert yourself to ap the body of projector.
EN EN
6 7
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
1 1.
Signal source
Up
Return
Left
Right
Down
Power Button
OK
Level-stand adjustment (to adjust
projection angle)
Projector mount holes (M5*16mm)
Bottom case (open to clean the internal
screen)
Note: For Ceiling mount, please slowly remove the 4 black rubbers, then you can nd the holes for ceiling mount.
The screw size is M5*16mm.
How to clean the Black Spots?
Open the dusting mouth cover rotation with a screwdriver.
Method 1 Method 2
Use the cold wind to blow the dusting mouth.Extert yourself to ap the body of projector.
EN EN
8 9
1.
10.
12.
13.
14.
1 1.
2.
3.
4.
5.
7.
8.
9.
6.
Remote Control
1.Signal indicator light
2.Power
3.Signal source
4.Arrow keys
5.Menu
6.Auto focus and keystone correction
7.Volume +
8.Volume -
9.Mute
10. Homepage
11. Conrm key
12. Return key
13. Manual focusing +
14. Manual focusing -
Note: Batteries are not supplied in the package, you must purchase two additional AAA batteries by yourself.
To avoid battery leakage corrosion, please take the batteries out if not use it for a long time.
Specications
Model No.: P62
Imaging System LCD Power AC100-240V/50-60Hz
Light Source LED Dimension 25.7*20*10.3CM
Color 16.8M Full Color Resolution Native 1920*1080 Full HD
Projection Distance 1.5-7m Input Interface HDMI*2/VGA/AV/ USB*2
Projection Size 50-300” Zoom Function 100%-50%
Aspect Ratio 16:9 /4:3/Auto Output Interface AUDIO OUT
Keystone Correction Auto/Manual Focus Auto/Manual
Projection Size Chart
Distance Screen Size Distance Screen Size
1.5m 35’’ 3.9m 120’’
1.7m 50’’ 5.5m 180’’
2.4m 72’’ 7.0m 300’’
3.3m 100’’
Please refer to the following table to adjust your picture
size and distance.
Optimum projection distance: 3m
Please allow ± 3% to the image sizes in the table above.
If the distance is less than min data and more than
max data, the image could be blurry.
EN EN
8 9
1.
10.
12.
13.
14.
1 1.
2.
3.
4.
5.
7.
8.
9.
6.
Remote Control
1.Signal indicator light
2.Power
3.Signal source
4.Arrow keys
5.Menu
6.Auto focus and keystone correction
7.Volume +
8.Volume -
9.Mute
10. Homepage
11. Conrm key
12. Return key
13. Manual focusing +
14. Manual focusing -
Note: Batteries are not supplied in the package, you must purchase two additional AAA batteries by yourself.
To avoid battery leakage corrosion, please take the batteries out if not use it for a long time.
Specications
Model No.: P62
Imaging System LCD Power AC100-240V/50-60Hz
Light Source LED Dimension 25.7*20*10.3CM
Color 16.8M Full Color Resolution Native 1920*1080 Full HD
Projection Distance 1.5-7m Input Interface HDMI*2/VGA/AV/ USB*2
Projection Size 50-300” Zoom Function 100%-50%
Aspect Ratio 16:9 /4:3/Auto Output Interface AUDIO OUT
Keystone Correction Auto/Manual Focus Auto/Manual
Projection Size Chart
Distance Screen Size Distance Screen Size
1.5m 35’’ 3.9m 120’’
1.7m 50’’ 5.5m 180’’
2.4m 72’’ 7.0m 300’’
3.3m 100’’
Please refer to the following table to adjust your picture
size and distance.
Optimum projection distance: 3m
Please allow ± 3% to the image sizes in the table above.
If the distance is less than min data and more than
max data, the image could be blurry.
EN EN
10 11
Operating Instructions
1.Getting Started
2.Focus and Auto Keystone Correction
• To get a better watching, please use this projector while drawing the curtain or in a dark room.
• Please use the projector carefully, dropping or crashing may damage parts or result in blurred images and
abnormal displaying.
• Remove the lens cap, connect the projector with the power through power supply cable, it starts work.
• Then boot screen appears, like the picture.
(1)Auto Focus and Keystone Correction.
Please place the projector horizontally face to wall rst, turn on and then it will automatically focus the picture based
on the projection distance from the screen and adjust the picture to a rectangle. Or press " "Auto focus and
keystone correction key directly.
If the picture is blurry, press the focus button ''F+'' ''F-'' on the remote control to adjust the lens focus, tap or long
press the adjustment button until the picture is clear.
(2)How to Use Projection Settings
Select the settings icon in the upper right corner of the main interface, and then press the "OK" key on the remote
control to enter the settings interface and select "Projection Image Setting". After entering the interface, select the
mode you want in the projection settings, then adjust the keystone as you want.
• Manual Keystone
After going into"Manual Keystone",you can set “4-point Keystone”as your need: Horizontal Value ±96, Vertical Value
from±54
Just click “OK” button to pick the point you want adjust at rst, and then press the button " ▶" or " ▼" to set the value
needed as shown below.
EN EN
10 11
Operating Instructions
1.Getting Started
2.Focus and Auto Keystone Correction
• To get a better watching, please use this projector while drawing the curtain or in a dark room.
• Please use the projector carefully, dropping or crashing may damage parts or result in blurred images and
abnormal displaying.
• Remove the lens cap, connect the projector with the power through power supply cable, it starts work.
• Then boot screen appears, like the picture.
(1)Auto Focus and Keystone Correction.
Please place the projector horizontally face to wall rst, turn on and then it will automatically focus the picture based
on the projection distance from the screen and adjust the picture to a rectangle. Or press " "Auto focus and
keystone correction key directly.
If the picture is blurry, press the focus button ''F+'' ''F-'' on the remote control to adjust the lens focus, tap or long
press the adjustment button until the picture is clear.
(2)How to Use Projection Settings
Select the settings icon in the upper right corner of the main interface, and then press the "OK" key on the remote
control to enter the settings interface and select "Projection Image Setting". After entering the interface, select the
mode you want in the projection settings, then adjust the keystone as you want.
• Manual Keystone
After going into"Manual Keystone",you can set “4-point Keystone”as your need: Horizontal Value ±96, Vertical Value
from±54
Just click “OK” button to pick the point you want adjust at rst, and then press the button " ▶" or " ▼" to set the value
needed as shown below.
EN EN
12 13
• Digital Zoom
With the zoom value at 100%-50%, Just click “OK” button enter,and then press the button " ▲" or " ▼" to set the value
needed as shown below.(Note: The zoom value will be affected by the value of four-point keystone correction)
• Correction setting
Trapezoidal Correction Reset: Press ''OK'',the image will restore to the original keystone correction settings.
3.Connect input devices and then choose signal source button to choose
corresponding signal source ( HDMI1, HDMI2, AV,etc)
For the USB devices, no need to choose the signal source. The machine will detect them
automatically.
Just operate through the remote control: Press “ ” and then press " ◀ ▶ " or " ▲ ▼ " to choose the corresponding
signal input channel, then press "OK’’ to conrm.
EN EN
12 13
• Digital Zoom
With the zoom value at 100%-50%, Just click “OK” button enter,and then press the button " ▲" or " ▼" to set the value
needed as shown below.(Note: The zoom value will be affected by the value of four-point keystone correction)
• Correction setting
Trapezoidal Correction Reset: Press ''OK'',the image will restore to the original keystone correction settings.
3.Connect input devices and then choose signal source button to choose
corresponding signal source ( HDMI1, HDMI2, AV,etc)
For the USB devices, no need to choose the signal source. The machine will detect them
automatically.
Just operate through the remote control: Press “ ” and then press " ◀ ▶ " or " ▲ ▼ " to choose the corresponding
signal input channel, then press "OK’’ to conrm.
EN EN
14 15
Connecting with Smartphones and iPad
How to Use WiFi Settings
For IOS System
Note: This projector support only Wireless Connection, wired connection is not possible.
PS: The fluency of screen mirroring with wireless connection will be affected by the network environment. A
bandwidth of 100Mbit or more is recommended when using screen mirroring. Make sure your mobile device is
closed to the projector when using wireless connection. A distance within 1 meter is recommended.
Select the settings icon in the upper right corner of the main interface, and then press the "OK" key on the remote
control to enter the settings interface and select "WiFi Setting".
Setting with Home Wi-Fi
Attention: Your device and the projector should be in the same Home WiFi.
1.Turn on the WiFi Setting of projector.
2.Choose your Home WiFi to connect and enter the right password, then click “Done” to Connect, please wait 3-5
seconds to establish the connection. Once connected, it will remember the password of the connected WiFi.
3.Turn on the WiFi setting of your iOS device, then connect it the same Home WiFi as the projector.
4.Then click “iOS Cast” as the Input Source of your projector.
5.Swipe up the screen of your iOS mobile device and tap “Airplay” to search for the projector, then select “WiMiUS-
P62Projector” from the searching results to connect.
6.Succeed.
For Android System
To activate this function, your android device must support Multi-Screen/Wireless Display. Name of “Multi-Screen”
may vary depending on various brands of Android devices.
1.Turn on the projector, select “Miracast” as the Input Source.
2.Turn on the “Multi-Screen/Wireless Display” of your Android device.
3.Select “WiMiUS-P62Projector” from the searching results to connect.
4.Succeed.
Method 1: Setting with mobile internet
EN EN
14 15
Connecting with Smartphones and iPad
How to Use WiFi Settings
For IOS System
Note: This projector support only Wireless Connection, wired connection is not possible.
PS: The fluency of screen mirroring with wireless connection will be affected by the network environment. A
bandwidth of 100Mbit or more is recommended when using screen mirroring. Make sure your mobile device is
closed to the projector when using wireless connection. A distance within 1 meter is recommended.
Select the settings icon in the upper right corner of the main interface, and then press the "OK" key on the remote
control to enter the settings interface and select "WiFi Setting".
Setting with Home Wi-Fi
Attention: Your device and the projector should be in the same Home WiFi.
1.Turn on the WiFi Setting of projector.
2.Choose your Home WiFi to connect and enter the right password, then click “Done” to Connect, please wait 3-5
seconds to establish the connection. Once connected, it will remember the password of the connected WiFi.
3.Turn on the WiFi setting of your iOS device, then connect it the same Home WiFi as the projector.
4.Then click “iOS Cast” as the Input Source of your projector.
5.Swipe up the screen of your iOS mobile device and tap “Airplay” to search for the projector, then select “WiMiUS-
P62Projector” from the searching results to connect.
6.Succeed.
For Android System
To activate this function, your android device must support Multi-Screen/Wireless Display. Name of “Multi-Screen”
may vary depending on various brands of Android devices.
1.Turn on the projector, select “Miracast” as the Input Source.
2.Turn on the “Multi-Screen/Wireless Display” of your Android device.
3.Select “WiMiUS-P62Projector” from the searching results to connect.
4.Succeed.
Method 1: Setting with mobile internet
EN EN
16 17
Connecting with Bluetooth Speaker
1.Turn on your Bluetooth Speaker.
2.Turn on the Bluetooth Setting of your projector.
3.Seclect your Bluetooth speaker to connect.
4.Succeed.
Compatible with Bluetooth speakers, Bluetooth Headphones, iPhone Airpods,Bluetooth Earbuds,Bluetooth Earphones.
Other Connections
Supported multimedia playback formats
• Connect projector with PC by HDMI cable.
• Choose the media signal channel :“HDMI”
For the USB devices, no need to choose the signal source. The machine will detect them automatically.
• Select the required category “movie”, "music", "photo" or "Ofce Suite" in the main interface, and press the “OK”key on
the remote control to enter the corresponding category.
• According to the programs to choose :“photos” “music” “movie” or “Ofce Suite”.
• Choose the file you want to play, press the key “OK” to play or pause the file. (You cannot enter the required
category without connecting a USB disk.)
• Note: For the “Ofce Suite” option, you can play, demo PPT les.
1.Connecting with PC
2.USB Multimedia Connecting
Picture Format JPG、PNG、BMP、JPEG
Audio Format MP3、AAC、WAV、WMA、M4A、OGG、FLAC
Video Format MP4、MKV、WMV、3GP、MPG、TP、TS、F4V、DAT、FLV、TRP
File Format TXT、EXCEL、WORD、PPTX
EN EN
16 17
Connecting with Bluetooth Speaker
1.Turn on your Bluetooth Speaker.
2.Turn on the Bluetooth Setting of your projector.
3.Seclect your Bluetooth speaker to connect.
4.Succeed.
Compatible with Bluetooth speakers, Bluetooth Headphones, iPhone Airpods,Bluetooth Earbuds,Bluetooth Earphones.
Other Connections
Supported multimedia playback formats
• Connect projector with PC by HDMI cable.
• Choose the media signal channel :“HDMI”
For the USB devices, no need to choose the signal source. The machine will detect them automatically.
• Select the required category “movie”, "music", "photo" or "Ofce Suite" in the main interface, and press the “OK”key on
the remote control to enter the corresponding category.
• According to the programs to choose :“photos” “music” “movie” or “Ofce Suite”.
• Choose the file you want to play, press the key “OK” to play or pause the file. (You cannot enter the required
category without connecting a USB disk.)
• Note: For the “Ofce Suite” option, you can play, demo PPT les.
1.Connecting with PC
2.USB Multimedia Connecting
Picture Format JPG、PNG、BMP、JPEG
Audio Format MP3、AAC、WAV、WMA、M4A、OGG、FLAC
Video Format MP4、MKV、WMV、3GP、MPG、TP、TS、F4V、DAT、FLV、TRP
File Format TXT、EXCEL、WORD、PPTX
EN EN
18 19
• Choose the media signal channel :“HDMI”
• Use a Type-C to HDMI adapter to connect your MacBook, or a Mini Display to HDMI adapter to connect with your
MacBook Air (adapter not included).
• Use the 3.5mm audio cable coming with the projector to connect with sound bar.
• Turn on the projector and the sound bar, select [ AV ] as the signal source
• Use the 3-in-1 AV cable, connect the colorful female connectors to your DVD player's RCA cable.
• Connect the black connector to the AV port of the projector, enter the home page to select [ AV ] as the signal
source.
3.Connecting with MacBook or Mac Book Air
4.Connecting with Sound bar
5.Connecting with DVD
• Plug the TV stick into HDMI port of the projector.
• Choose the media signal channel :“HDMI”
• P.S: It only supports 1080P TV stick, not 4K TV stick.
• Choose the media signal channel :“HDMI”
• Use HDMI cable connect to XBOX/PS4
6.Connecting with re TV Stick
7.Connecting with XBOX/PS4
EN EN
18 19
• Choose the media signal channel :“HDMI”
• Use a Type-C to HDMI adapter to connect your MacBook, or a Mini Display to HDMI adapter to connect with your
MacBook Air (adapter not included).
• Use the 3.5mm audio cable coming with the projector to connect with sound bar.
• Turn on the projector and the sound bar, select [ AV ] as the signal source
• Use the 3-in-1 AV cable, connect the colorful female connectors to your DVD player's RCA cable.
• Connect the black connector to the AV port of the projector, enter the home page to select [ AV ] as the signal
source.
3.Connecting with MacBook or Mac Book Air
4.Connecting with Sound bar
5.Connecting with DVD
• Plug the TV stick into HDMI port of the projector.
• Choose the media signal channel :“HDMI”
• P.S: It only supports 1080P TV stick, not 4K TV stick.
• Choose the media signal channel :“HDMI”
• Use HDMI cable connect to XBOX/PS4
6.Connecting with re TV Stick
7.Connecting with XBOX/PS4
Other manuals for P62
1
Table of contents
Other Wimius Projector manuals
