Wimius T6 User manual

M S OK
User Manual
Please read this Manual carefully before use;
The company reserves the right of nal interpretation;
Appearance of the product and the UI please in kind prevail;
If product technology or software upgrades, without prior notice.
PROJECTOR T6

Language
16-30
31-46
47-61
62-76Español
1-15

Introduction
Features
Accessories
A composite video input
A component video input
A high denition VGA interface input
A HDMI HD input
A USB input
The projector can be externally connected with 5 basic image signal sources:
Projector * 1 Lens Cover * 1 Remote Controller * 1
Power Cable * 1
VGA Cable * 1 User Manual * 1 Cloth * 1 Back-up Protective
Tube * 1
AV Cable * 1 HDMI Cable * 1
1
Thank you so much for choosing our projector. The projector can put the whole
color video image signal processing into the big screen for presentations or enter-
tainment, especially suitable for dance halls, karaoke OK, home theater and business
presentation.
1. 1.8-4.5 meters projection distance with 40-150 inches projected image.
2. High contrast of 3000: 1, aspect ratio of 16:9/4:3
3. 1280*800 resolution, supports 1080P, 720P, 480P videos, 16.7M full color
4. LCD & LED lamp projection technology, 20,000 hours of lamp life
5. With multi interfaces, can be easily connected to DVD players, video recorders,
cameras, game consoles and computers, etc.
6. Supports large capacity mobile hard disk (500G-2T mobile hard disk needs
external power supply).
7. Compatible with dierent kinds of video formats, audio formats and picture
formats to meet your requirement.
8. The OSD Language can be selected in English, Spanish, German, Italian, French
and other 20 kinds of international languages.

Warning
1. Before using, please read the manual carefully and operate according to this
manual's instructions.
2. Do not staring or looking directly at the light because of the high brightness lamp,
especially for children.
3. When installing the projector, you should choose those adequate strength hanger
and screws, so as to avoid screw quality or rotating depth is not enough and
projector falling accident.
4. As a Class A product in a domestic environment, the projector may cause radio
interference. In this case, the user may be required to take adequate measures.
5. Due to high voltage inside, please do not open or try to repair the projector by
yourself. Please ask a professional technician to repair the projector.
6. In normal operation, the projector gets into standby mode after press the power
button on the control panel or remote control. Before disconnecting the AC power
cord, make sure the cooling fan has stopped. Do not disconnect the AC power
cord to turn o the projector, as this may cause the projector to malfunction.
7. About (remote control) Battery Note: If the battery is installed in reverse polarity
(positive and negative reversed position), then the battery will overheat and the
remote control becomes damaged. Ensure the remote control is out of children's
reach.
8. Please use the power of the projector labeled type and it is dangerous to use other
types of power supply.
9. Please use the supplied adapter to match the power supply, if you need to
change, please contact your dealer for replacement.
10. To ensure the stability and security of the power supply unit, it is recommended
to use a separate power lines with protective measures electrical outlet, which is
not allowed connecting to a variety of high-power electrical products in a line,
such as refrigerators, air conditioning, and so on.
11. Do not place this projector to moist or hot place; otherwise the projector may
break down.
12. If the projector is not used in a long time, please pull out the power cable from
the mains socket.
13. The projector vent is on the side to prevent overheating. Before use, you should
check them to ensure that there are no objects around.
14. Do not insert anything into the slit of the projector, or it may produce a short
circuit or an electric shock to your device and cause damage.
2

1. Schematic
Projector
Front
Back
① Lens (Focus Ring)
② Adjustable Foot
③ Air Intake
④ Remote receiver
⑤ Audio Output & Input
⑥ AV (video) Signal Input
⑦ Component Input
⑧ Power Switch
⑨ Power Input
⑩ Keystone Correction Ring
HDMI Interface
VGA Interface
USB Interface
1 32
4 5 6 7 8 10 11 12 913
P C- RGB I N
HDMI1
HDMI2
11
12
13
3

Right
Left
Top Bottom
18 17
Right Channel Speaker
14
Left Channel Speaker
Vent
15
Control Panel
Working Indicator
17
18
Mounting Bracket Attachment Point
(4pcs, x with M4x8mm screws)
Air Intake
Label
19
20
21
16
14
1615
2119 20
M S OK
4

Control Panel
Remote Control
Power OK
UP Menu Left
Power: Power on/o
Play/Pause
Fast Backward
Fast Forward
Menu
Flip Vertical: Rotate the
image up or down
Direction key: Adjust the
specications when setting
Volume Up / Volume Down
Mute: Open / close the sound
Stop
Down Source Right
M S OK
TTX
C H
TTX
1 2 3
45 6
789
0
OK
DT V
A-SCAN
SUPAGE
GOT O
EPG
REC
VOL
1 2 3
45 6
789
0
OK
DT V
M
S
EXIT
GOT O
16:9/4:3
EPG
REC
MO D E ZOOM SCHEDULE
Next
Last
Flip Horizon: Rotate the image
left or right
OK: Conrm
Exit
Source: Source menu
16:9/4:3: Changes the
picture's aspect ratio
Note: When using the remote controller, please make front of the remote controller
face the remote receiver within the range of 6 meters and 30 degrees. Otherwise, it
is possible that it will not work.
5

2. Installation
Installation Position
Front Projection Ceiling Front Projection
Rear Projection Ceiling Rear Projection
Installation Note: When forward lifting, the projector cannot be higher than the
projection screen edge; otherwise, it will aect the eect of adjusting the image and
keystone correction.
B. Keep the projector at a height where its lens is axial symmetry to the screen. If this
isn't possible, use the keystone correction ring to adjust the image.
A. Place the projector on a solid, stable surface or hanger,withventilationsurround-
ing;do not block the vents and there are no shelter objects around the vents within
30cm. To suspend the projector from a ceiling, you will need the projector mount
designed for the projector.You can install the projector shown below according to
your requirement.
When install correctly, the image is positive square.
ScreenSquare Positive
Image
The symmetry axis
of the screen Projector
6

The distance between the projector and screen
The distance from the projector and screen determines the size of the image.
Depending on your display setting and how you use the focusing ring, the actual size
may dier. See the following gure as a guide for projector placement.
Screen Size(16:9) Projection Distance
60”
72”
84”
100”
Focusing Ring
2.0~2.1 m
2.3~2.5 m
2.7~2.9 m
3.2~3.4 m
High brightness lamp!
Avoid staring or looking directly at the light, especially for children.
Focus adjustment
Place the lens perpendicular to projection screen. Rotate the lens clockwise and the
lens will be back into the projector. Rotate the lens anticlockwise with the lens
coming out. Move the focusing ring following the operation method to sharpen the
image until the image is clear. During the adjustment, you can play shows or call up
the menu for easy operation.
7

P C- RGB I N
HDMI1
HDMI2
PC-RGBIN
HDMI1
HD MI2
Keystone Correction
Slowly move the keystone correction ring on the back side of the projector until the
image change to be square. The image can be adjusted up to ±15 degrees. If the
keystone is still by moving the keystone correction ring to the limit position, please
shorten the vertical distance between the protector and the center of the projection
screen. In the way of table mount, you can change the projection angle by move the
adjustable feet.
3. Signal Lines Connection
A. Power input
Before using, please plug the power cable into the power input jack of the projector
and another end plug into the AC outlet.
Keystone Correction Ring
Projector
Power Cable
Mains Socket
8

B. VGA input
With this port, the projector can be connected to a computer or a laptop with VGA
video signal.
When connect the projector with the notebook, you may need to press Fn + F*
(F1-F10 on the keyboard) to change the output.
Note: when there is a computer connected to the projector and the image cannot
be displayed simultaneously, please set the display properties of the computer,
selecting the output mode for the CRT.
Windows 7 above system users need to press the“ + P” key on the keyboard.
Choose the "copy" option to connect. If the operation is invalid, please update the
computer graphics driver.
Because of each brand of computer button function dierence, you can refer to the
following table.
VGA Cable
Laptop Desktop
VGA Cable
Fujitsu
Haier
NEC
Panasonic
Sharp
Hitachi
TOSHIBA
Fn+F10
Fn+F3
Fn+F3
Fn+F3
Fn+F5
Fn+F7
Fn+F5
Lenovo
Dell
HP
ThinkPad
Asus
Acer
Samsung
Sony
Fn+F3
Fn+F8
Fn+F4
Fn+F7
Fn+F8
Fn+F5
Fn+F4
Fn+F7
9

C. AV (Video) input
This port can be connected to the DVD players and set top box with AV interface, etc.
D. Component input
Can be connected to DVDs, TVs and set top boxes with YPbPr interface, and so on.
E. Audio output
Can be connected to the audio devices with audio input jack, including speakers, etc.
DVD Player
DVD
Component Cable
AV Cable
Red
Red
Red
Red
Green
Green
Blue
Blue
Red
Yellow
Yellow
White
White
RedWhite
White
Projector
Projector
Projector
L
AUDIO OUT VIDEO OUT HDMI OUT
RS-VIDEO VIDEO
Speaker
Audio Signal Line
AUDIO IN
L R
10

P C- RG B I N
HDMI1
HDMI2
P C- RGB I N
HDMI1
HDMI2
4. Basic Operation
①Power on/o
A. Power on
F. HDMI input
Connect to the devices with HDMI interface, including PC, laptop, DVD players, video
box, set top box and game console, etc.
G. Insert U disk
Insert the U disk or portable hard disk into the USB interface. The projector can
connect to two USB devices in maximum at the same time.
Note: The projector supports the portable hard disk under 500GB without external
power; And the portable hard disk above 500GB need external power supply.
After connect with the power cable and
power on, turn on the power switch on the
back of the projector, and then the indicator
turns in red. Press the Power button on the
control panel or remote control and the
indicator turns to green. The projector goes
into normal working mode.
B. Power o
Press the Power button on the control panel or remote control again, and the
projector will go to the state of standby. The indicator turns back into red.
Video player
HDMI Cable
L
AUDIO OUT VIDEO OUT HDMI OUT
RS-VIDEO VIDEO
11

S
OK
A. Refer to "Menu setting" steps to switch to the
PICTURE setting page (as the right picture
shown).
B. Press the Up (▲)/Down (▼) button to select
“Flip Horizon”or“Flip Vertical”.
Flip Horizon: Rotate the image from left or right.
Flip Vertical: Rotate the image from up or down.
C. Press the OK button to make the image ip.
② Input Source Selection
③Menu Setting
④ Image Flip
A. Press the SOURCE button to enter the source selection interface.
B. Press Up (▲)/Down (▼) button to select the input source from
AV, Component, PC-RGB, HDMI and USB.
AV：AV (Video) signal input
Component: Component input
PC-RGB：PC signal input
HDMI：HDMI signal input
USB：Multimedia signal input
C. Press the OK button to conrm the input source.
A. Press the Menu button on the control panel or remote control
to call up menu page.
B. Press the Left ( )/Right ( ) button on the control panel or
remote control to select the menu you want to set.
C. Press the Up (▲)/Down (▼) button on the control panel or
remote control to select the sub-menu you need to set. Then
the sub-menu of the selected will be highlighted.
D. Then press the OK button on the control panel or remote
control to enter the selected sub-menu (Some options of
sub-menu are also change/conrm by pressing the OK
button).
E. Press the Up (▲)/Down (▼) button on the control panel or
remote control to select parameter values.
F. Repeat the above step B to step E to set the other menu items,
or simply press the "MENU" or "EXIT" button to exit the menu
page.
M
OK
Picture
Picture Mode User
Color Temperature
Aspect Ratio
X_Zoom
Y _Zoom
Noise Reduction
PC Setting
Color Range 16-235
Flip Horizon
Flip Vertical
12

5. USB Multimedia Play
Check if the U disk is fully plugged into the USB
interface.
Refer to the“Input Source Selection" section to
select the USB as the signal source. Please select
the corresponding input channel. After gets into
the USB input mode, it will comes out the page
as shown.
Press the Up (▲)/Down (▼)/ Left ( )/Right ( )
button to select the folder you want to see.
Go into the folder and le directory by pressing
the OK button.
A. Refer to "Menu setting" steps to switch to the
OPTION setting page (as the right picture
shown).
B. Press the Up (▲)/Down (▼) button to select
OSD Language and then press the OK button to
go into the selection screen.
C. Press the Up (▲)/Down (▼)/ Left ( )/Right ( )
button to select the language you want.
D. Press the MENU button to set and exit. Also, you
can wait the system to conrm the current
selection and exit.
⑤Language Setting
A. Use the Up (▲)/Down (▼)/ Left ( )/Right ( ) button and the OK button to select
les you want to play.
B. Press the ( ) to play.
A. When play the video, press the OK button to
call up the operation options as shown.
B. Press the Left ( )/Right ( ) button to select
the option.
C. Press the OK button to set.
D. Press the EIXT button to exit the page of
operation options.
①Video Play
②Play Operation
OPTION
OSD language English
Restore Factory Default
Blending
HDMI CEC
Osd Duration
Software Update
PHOTO MUSIC
VIDEO TEXT
13

Play/Pause: Start to play or pause video
Stop: Stop playing
Fast Backward: Play video back in speed of 2x, 4x,
8x, 16x, 32x
Fast Forward: Play video forward in speed of 2x, 4x,
8x, 16x, 32x
Last: Play the previous selected program
Next: Play the next selected program
TTX
C H
TTX
1 2 3
45 6
789
0
OK
DT V
A-SCAN
SUPAGE
GOT O
EPG
REC
VOL
1 2 3
45 6
789
0
OK
DT V
M
S
EXIT
GOT O
16:9/4:3
EPG
REC
MO D E ZOOM SCHEDULE
6. Troubleshooting
After the
projector power
up, the indicator
does not light.
◇ Does power cable plug in or connect well?
◇ Does the power switch on the outlet is on?
◇Does the outlet have a normal mains voltage?
◇ Check the over-heat protection system.
◇ Does the power switch of the projector turn on?
After turn on the
projector, there is
no image on the
screen.
◇Does the signal source of the projector select correct?
◇Does the signal cable plug in?
◇Does the signal cable plug in the wrong position?
◇Under VGA input mode, does the computer display refresh
rate set too high?
◇When using a portable computer, does the output of the
laptop have set to signal external display?
Press the Power
button on the
remote control
and the projector
cannot turn up.
◇Do the remote control batteries run out?
◇ Are there obstructions between the receiver window and
the remote control?
◇ Is the operating distance of the remote control and
the projector too far?
The protector
automatically
shut down after
each boot for a
period of time.
◇Is the vent of the projector blocked by other objects?
◇Does the projector overheat protection?
Normal picture,
but no sound.
◇Does the volume of the projector turn to minimum or mute?
◇Is there a stereo audio signal output device?
◇Does the volume of the sound equipment turn to minimum?
Check the following before contact the technicians.
14

Specications
Model
Projector System
Contrast
Resolution
Image Size
Projection Distance
Aspect Ratio
Focus
Color
Lamp life
Lamp
Interfaces
Power
Built-in Speaker
Keystone Correction
Power Supply
Compatible USB Format
Image Flip
Projector Size
Operating Temperature
Storage Temperature
WIMIUS T6
LCD projection system
3000: 1
1280*800 (supports 1920*1080)
40～150 inches
1.8～4.5m
16:9 / 4:3
Manual
16.7M
20,000 hours
LED lamp: 80W
Audio output & input (RCA interface *4)
AV input (RCA interface *1)
Component input (RCA interface *3)
HDMI input (HDMI interface * 2)
USB input (USB interface * 2)
VGA input (VGA interface * 1)
120 W
3W * 2
±15 degrees
AC110-240V 50Hz/60Hz
Video format: MPEG1, MPEG2, MPEG4, RMVB,
AVI, MP4, WMV, FLV
Audio format: WMV, MP3, M4A(AAC), WAN: not
support for dolby
Photo format: PNG, GIF, JPEG, JPG
Text format: TXT
Support
325（Width）*250（Height）*110（Depth）mm
+5℃~+35℃
-10℃~+60℃
15

Vorwort
Produkt-Eigenschaften
Zubehör
1．Composite-Video-Eingangssignalquelle
2．Komponenten-Videoeingang
3．hochauösende VGA Signalquelle
4．HDMI hochauösende Eingangssignalquelle
5．USB Multimedia Eingangssignalquelle
5 Basis-Videoquellen für diesen Projektor verfügbar:
Projektor * 1 Objektivdeckel * 1 Fernbedienung * 1
Netzkabel * 1
Benutzerhandbuch
* 1
Tuch * 1
Back-up Schutzrohr
* 1
AV-Kabel * 1 VGA-Kabel* 1
HDMI Kabel * 1
16
Vielen Dank für die Auswahl unseres Projektors. Das verarbeitete Vollfarb-Videosig-
nal kann auf die Großleinwand projiziert werden, dafür wäre dieser Projektor vor
allem für Tanzlokale, Karaoke OK, Heimkino und Business-Präsentationen und
andere Business- und Unterhaltungsaktivitäten geeignet.
1. 1.8-4.5 Meter Projektionsabstand mit 40-150 Zoll projizierte Bild.
2. Hohe Kontrast von 3000: 1, Bildseitenverhältnis von 16: 9/4: 3
3. 1280x800 Auösung, unterstützt 1080P, 720P, 480P Videos, 16.7M Vollfarbe、
4. LCD & LED-Lampenprojektionstechnologie, 20.000 Stunden Lampenlebensdauer
5. Dieser Projektor ist mit einer Reihe von verschiedenen funktionalen Schnittstellen
ausgestattet, kann mit DVD-Playern, Videorecordern, Camcordern, Spielekonsolen,
Computern und anderen Geräten verbunden werden
6. Große Kapazität Wechselfestplatte(500G-2T mobile Festplatte für eine externe
Stromversorgung) zu unterstützen
7. Eine Vielzahl von Video-Formate, Audio-Formate und Bildformate stehen zur
Verfügung, um Ihre verschiedenen Bedürfnisse zu erfüllen
8. OSD-Sprache kann auf Englisch, Spanisch, Deutsch, Französisch und andere 20
Sprachen eingestellt werden