Wimius K7 User manual

USER MANUAL
[email protected]

CONTENTS
WiMiUS PROFESSIONAL SUPPORT -
PROJECTOR
SPECIFICATIONS
------===--=-=-==nnsmmmmmmmne
02
PRODUCT
STRUCTURE
~-------==--n=--mnmmmmm
e
03
INSTALLATION
===~
==
05
PROJECTION SIZE CHART -
STARTING PROJECTOR
IMAGE ADJUSTMENT
1.
Focus
adjustment
-------——-—--ooooomooo
08
2. 6D keystone COMection = ---=======mmmmmmeeemoooooooooon 09
WIFI
SETTING
=========m====smmmssssmosssoosoooooooooooo
oo
10
1,008 €St === = m e e 12
2. Miracast ---
iOS CABLE CAST -
BLUETEETH SETTING
ZOOM
SETTING
-
e
16
SIGNAL
LINES
CONNECTION
===
mmmmmmmmmmmmmmmmcmmcmcmmoen
18
MAIN
MENU
FUNCTION
-
-
oo
oo
19
1.
PICtUrE
===
===
20
2.80UNd
~=m
===
e
20
4. Other Options
5. System Settings ------------ooommoooo 21
FAQ —-mm oo e e 22

[email protected]
Dear customer,
Thank you for choosing WiMiUS!
Please read this manual thoroughly before using the projector. If you have any issues,
email your amazon order number and the problem to [email protected]. We will
provide a fast solution within 24 hours.
Actually, many problems can be easily solved by setting, such as no signal, no sound,
bluetooth connection failed, WiFi connection failed, dark spots, choppy animation etc. We
promise all the projectors have been 100% carefully checked and packaged before
shipping.
Any questions, reach us via below methods:
Email: [email protected]
Website: www.wimius.com
WiMiUS Service Team
1. Do not place projector in too warm or too cold room, because the high temperature or
low temperature will shorten lifespan of the device. The working environment would be 5
C~35C better.
2. If there are black spots on the projection screen, please don't worry, please contact
us.com via email, we can send you a video about how to remove the
3. The ventilation is equipped for the projector to work stably. Don't cover the vent with
cloth, blanket or other things. Don't insert anything into the slit of the projector, o it may
produce a short circuit or an electric shock to your device and cause damage.
4. The projector shall be strictly protected from strong impact, extrusion and vibration. Do
not try to move and on strong impact, extrusion and vibration. Do not try to move and the
internal circuit faults.
5. Lens, as the core component of the projector, is directly related to the picture definition
and effect. The excessive dust thereon will affect image quality. The dirty lens shall be
wiped with soft cotton cloth for the glass lens surface. Hard cloth or abrasives shall not be
used.

[email protected]
WiMiUS K7
Projector*1
Remote Control*1
3-in-1 AV Cable x1 HDMI Cable*1
User Manual*1 Cleaning Cloth*1
g |
Model No.: K7
Display Technology | LCD Light Source LED
Native Resolution | 1920x1080P Focus Manual
Installation Type EZ:Z'}::;’;%‘*:E‘Q Aspect Ratio 16:9/4:3/Auto
Projection Distance | 1.6-7m Power Voltage | AC100-240V
Product Size 274"246"113mm Product Weight | 2.2kg
Input Interface | HOMI*2/USB*2/AV/3.5mm audio out
VideoFormat 3GP/AVIIFLVIMP4/MPGVOBITS/M2TS/DATIMKY
Audio Format MP3/APE/AAC/FLAC/OGG/WAV/WMAMID/DTS/MAA
Image Format BMP/JPG/PNG/JPEG

[email protected]
@
®
. Level-Stand Adjustment
. IR Receiver
Lens
. Power Connector
. Wired Network Port (no use)
. IR for Remote Control
. 3.5mm Headphone jack
HDMI 1
9. USB Ports*2
10. AV Prot
11. HDMI 2
12. Speaker
13. Cooling Window
14. Focusing
15. Keystone Correction
16. Removable Dust Cover

[email protected]
O—€0) ®
04 06
@ ®
o ) —©
- ®
q+ @
q- i @
—@
]
1. Power Button 8. Menu
2. Signal Source 9. Play/Pause Key
3. Arrow Button 10. Back
4. All-round Menu Key 11.6D
5. VOL+ 12. Previous
6. VOL- 13. Next
7. Light 14. Mute

[email protected]
Note:
1. Install 2 pieces of AAA batteries(not included) into the remote before using it, do not
combine new batteries with old ones in remote control, which can cause operation failure
due to insufficient power supply.
2. When using the remote control, please let the remote control aims at infrared signal of
the projector.
3. When you are not using the remote control for a long period. Please take out the batter-
ies to prevent it from leakage.
1. Installation Method
The projector can be hanged on the ceiling with special hanger frame, and placed on the
table desk to project the image according to the operating environment and requirements.
In addition, the projector can be installed by following methods:
Seeen Projector Projecty Sereen
(@ Front projection ceiling mount (@ Rear projection ceiling mount
Scroen
Projoctor ! ! _& Projecto Screenl l l
@ Front projection table mount @ Rear projection table mount
2. Install on the Ceiling
For ceiling mount, there are 4 holes at the bottom of the projector (M5*16mm). Please
slowly unscrew the 4 black rubbers, then you can find the holes for ceiling mount, see
below picture.
NOTE: The hanging bracket or ceiling mount stand is not packaged.

[email protected]
screw holes
Aspect Ratio: 16:9
Distance Screen Size
1.7m 50"
2.5m 75"
3.3 100"
4m 120"
5m 157"
7m 300"
*The image size depends on the distance between projector and screen. there may be 3%
measure difference among above listed data.
*The recommended projection distance is 2.5-3.5m.
*Ambient darkness will improve the clarity of the projected images.
1) Connect projector with power supply. The indicator light will tur red;
2) Press the power key on the remote or projector, the indicator light wil turn green, and
the projector's home page will appear as below:

[email protected]
3) Adjust the focus ring on the right side of the projector to get the best image performance
(If it s still blurry, please try to adjust the projection distance);
4) Use the 4D keystone function of the projector to get a rectangle projection screen;
5) Connect the external device (Smart phone, iPad, Amazon Fire TV, TV box, DVD player,
Computer, etc.in the corresponding interfaces of the projector, please be sure to select the
corresponding source. If you do not select the correct source, the projector will not be able
to detect the signal
IMAGE ADJUSTMENT
When using the projector for the first time, it normally displays an unclear image. This is
due to the lens being out of focus or the incorrect trapezoid setting
Please follow the below steps to correct
1. Focus Adjustment
Focusi

[email protected]
Rotate the focus ring or lens back and forth slowly to make the image clear.
Note: For all LCD projectors, only 90% of the screen is in full focus. This is normal.
2. 6D Keystone correction
Use the digital 6D keystone correction of the projector to change the image to be rectan-
gle(vertical and horizontal).
Auto 6D keystone correction function
Please turn on the 6D function on remote by pressing button "6D" or press the "6D" button
on the projector, then the image will be in correct keystone correction automatically. After
the image corrected, we suggest to turn off Auto 6D function for better viewing.
Manual keystone correction
The projector has both 4-sided trapezoidal and 4-comner trapezoidal correction functions.
You can not only adjust the image horizontally or vertically, but also adjust four points to
make the projected image a rectangle
Select the [ G} ] menu - Select the [ FourPoint Correction Setting ] Option
4-comner trapezoidal correction: Adjust the screen by 4 corners to a rectangle