WineEnthusiast NFINITY PRO User manual

N’FINITY HDX WINE &
BEVERAGE COOLER
(Features and Size May Vary)
User Manual
Model # 237 02 78 0Y
Y= 3 (Right Hinge) or 4 (Left Hinge)
PLEASE READ THIS MANUAL CAREFULLY BEFORE INSTALLING AND OPERATING

IMPORTANT SAFEGUARDS
When using this appliance, always exercise basic safety precautions,
including the following:
1. Read all of the instructions before using this appliance.
2. This appliance is not intended for use by persons (including children) with
reduced physical, sensory, or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning use
of the appliance by a person responsible for their safety.
3. Children should be supervised to ensure that they do not play with the appliance.
4. Use this appliance only for its intended purpose as described in this use and care
guide.
5. This wine and beverage cooler must be properly installed in accordance with the
installation instructions before it is used. See grounding instructions in the
installation section.
6. Never unplug your appliance by pulling on the power cord. Always grasp the plug
firmly and pull straight out from the outlet.
7. Unplug your wine and beverage cooler before cleaning or before making any
repairs. Note: If for any reason this product requires service, we strongly
recommend that a certified technician performs the service.
8. The SUPPLY CORD cannot be replaced. If the cord is damaged the appliance
should be scrapped.
9. This appliance is designed for free standing installation or can be recessed into
cabinetry.
10. If your old wine and beverage cooler is not being used, we recommend that you
remove the door and leave the shelves in place. This will reduce possibility of
danger to children.
11. Do not operate your appliance in the presence of explosive fumes.
12. Do not store food products in upper wine cellar zone as interior temperature
may not be cool enough to prevent spoilage or may cause bacteria growth.

SAVE THESE INSTRUCTIONS
DANGER
Risk of child entrapment.
Before you throw away your old wine cellar, take off the doors.
Leave the shelves in place so that children may not easily climb
inside.
Thank you for using our Wine Enthusiast
product. This easy-to-use manual
will guide you in getting the best use of
your Wine and Beverage Cooler.
Please remember to record the model and
serial number, they are on a label
on inside wall of the Wine Cellar.
Staple your receipt to this manual.
You will need the receipt to obtain warranty service.
Model number
Serial number
Date of purchase

Table of Contents
IMPORTANT SAFEGUARDS ............................................................................ 2
SAVE THESE INSTRUCTIONS......................................................................... 3
Electrical Requirement............................................................................... 5
Install Limitations ..................................................................................... 5
Use of Extension Cords .............................................................................. 5
Installation as a Built-In Cellar.................................................................... 5
Wine and Beverage Features and Use ............................................................. 6
Initial Setup............................................................................................. 6
Before You Start....................................................................................... 6
Temperature Adjustment ........................................................................... 6
Shelving.................................................................................................. 7
Installing the Handle ................................................................................. 9
Operating Your Wine and Beverage Cooler....................................................... 9
Reprogramming the Temperature Ranges................................................... 10
Replacing the Charcoal Filter .................................................................... 11
Interior Light ......................................................................................... 11
Technical Data .......................................................................................... 12
Proper Wine and Beverage Center Care and Cleaning ...................................... 13
Normal Operating Sounds You May Hear .................................................... 14
Troubleshooting ........................................................................................ 15
Limited Warranty ...................................................................................... 17

Electrical Requirement
• Make sure there is a suitable power Outlet (115 volts, 15 amps outlet) with
proper grounding to power the wine and beverage cooler.
• Avoid the use of three plug adapters or cutting off the third grounding to
accommodate a two-plug outlet. This is a dangerous practice since it
provides no effective grounding for the appliance and may result in shock
hazard.
Install Limitations
• Do not install your wine and beverage cooler in any location not properly
insulated or heated e.g., garage etc. Your wine and beverage cooler was
designed to operate in ambient temperatures 60°F to 90°F only.
• Select a suitable location for the wine and beverage cooler on a hard, even
surface away from direct sunlight or heat source e.g., radiators, baseboard
heaters, cooking appliances etc. Any floor unevenness should be corrected
with the leveling legs located on the front and rear bottom corners of the
appliance.
• This appliance is designed for free standing installation or can be recessed
into cabinetry.
Use of Extension Cords
• Avoid the use of an extension cord because of potential safety hazards
under certain conditions. If it is necessary to use an extension cord, use only
a 3-wire extension cord that has a 3-blade grounding plug and a 3-slot
outlet that will accept the plug. The marked rating of the extension cord
must be equal to or greater than the electrical rating of the appliance.
Installation as a Built-In Cellar
These cut out dimensions show the minimum space required for your wine
cellar to perform as designed. You can remove the leveling legs on the
bottom to reduce its height by 1/2”. You must use shims to level the unit if
you remove the leveling legs.

Unit
Height
(Inches)
Unit
Width
(Inches)
Unit
Depth
(Cabinet)
Built-In
Cut Out
Height
(Inches)
Built-In
Cut Out
Width
(Inches)
Built-In
Cut Out
Depth
(Inches)
NFINITY HDX PRO
77.6”
23.5”
24.8”
78.1”
24”
27”
Wine and Beverage Features and Use
Initial Setup
• Before connecting the appliance to the power source, let it stand upright
for approximately 24 hours. This will reduce the possibility of a malfunction
in the cooling system during transportation.
• Once you have plugged the unit into an electrical outlet, let it unit run for
at least 30 minutes before making any adjustments.
Before You Start
The appliance should be placed in a location where the ambient temperature
is between 60°F and 90°F. If the ambient temperature is above or below this
range, the performance of the unit may be affected. For example, placing
your unit in extreme cold or hot conditions may cause interior temperatures
to fluctuate.
Temperature Adjustment
• When the appliance is plugged in for the first time, the LED display will
show the factory preset temperature.
• The upper wine cooler and lower drawers can be set to any temperature
between 41° and 72°F to accommodate your wine storage and beverage
requirements. To set the temperatures, press the up or down arrow button
to increase or decrease the temperature setting until the desired
temperature is attained. It may take some time to reach the set
temperature. The temperature ranges can be modified, see page 10 -
‘Reprogramming the Temperature Ranges’ to make adjustments.

Shelving
(Type and number of shelves will vary per model)
Your cabinet was designed to store a maximum number of bottles securely.
We recommend that you observe the tips below to optimize loading:
• Remove packing materials once unit is stable and ready for storage.
• Disperse the bottles evenly to avoid concentrating weight in one place.
Bottles must not touch either the back of the cabinet or the step at the
bottom.
• Make sure that the bottles are not all grouped together either at the top or
bottom of the cabinet.
• Only pull out one rolling shelf at a time. Never attempt to pull more than
one.
• Maximum weight capacity per shelf is 44 lbs.
• This wine cellar has 8 shelves that can hold up to 9 bottles.
• You can remove a shelf to accommodate larger diameter bottles on the
shelf below it.
Removing the Shelf
To remove a rolling shelf:
1. Remove all bottles.
2. Pull the shelf out as far as it will go.
3. Push the left side lever downward while pushing the right side lever
upwards (as illustrated below).
4. Remove the shelf.

Rearranging the Shelf Layout
You can rearrange the configuration of your wine and beverage cooler by
moving the location of your shelf brackets. To move a sliding shelf, first
remove all bottles then remove the rolling shelf as illustrated above. You are
now ready to remove the shelf guide rails.
To remove shelf slide rails:
1. Fully extend out the guide rail.
2. Lift the front of the guide rail upwards to separate from the
appliance wall.
3. Pull guide rail towards you to completely release from the appliance.
4. Do not mix up the left and right guide rails.
5. Reposition guide rail to the new location and reinstall in reverse
order.

Installing the Handle
1. Pull back the door seal behind handle location.
2. Insert screws into pre-drilled screw holes.
3. Attach handle and tighten screws.
4. Press door seal back into place.
Operating Your Wine and Beverage
Cooler
Each wine and beverage cooler includes an operating panel on the front of
the unit. This operating panel includes several features to operate and
control the temperature.
1. Turns the Interior Light ON and OFF. To toggle temperature between
Fahrenheit and Celsius, hold button for 3 seconds.
2. Increases Wine Cooler Temperature

3. Upper Wine Cooler Temperature Display
4. Lowers Wine Cooler Temperature
5. Temperature Set Button
6. Increases Drawers Temperature
7. Drawers Temperature Display
8. Lowers Drawers Temperature
Setting the Temperature Control
NOTE: The temperature readout indicates set temperature while
programming then reverts to the actual temperature.
1. To set the desired temperature press the Temperature Set button.
2. The Upper Wine Zone temperature display will start flashing.
3. Set the desired temperature by pushing the UP (+) or DOWN (-)
button.
4. The temperature increases or decreases 1°F with each push of the UP
(+) or DOWN (-) button.
5. Press the Temperature Set button again, the Lower Drawers Zone display
will start flashing.
6. Set the desired temperature by pushing the UP (+) or DOWN (-)
button.
7. The operating panel will automatically exit programming mode after being
idle for 5 seconds.
NOTE: Temperatures may fluctuate depending on whether the interior light
is ON or OFF and depending on the position of the bottles.
Reprogramming the Temperature Ranges
The default temperature setting for the upper and lower zones is 41°F -
72°F. The ranges can be modified to suit your wine and beverage storage
preferences; minimum temperature of 34°F (lower zone)/41°F (upper zone)
and a maximum of 72°F (both zones).

1. Press and hold the Light (1) & Set (5) buttons simultaneously for 15
seconds until you hear a beep. Then release the buttons.
2. Press the Light (1) button (only) to select the zone. The zone will show
in the left display window (3) and the temperature will show in the right
display window (7).
a. P01: the lowest temperature of upper zone
b. P02: the highest temperature of upper zone
c. P03: the lowest temperature of lower zone
d. P04: the highest temperature of lower zone
3. Use the +(2) and –(4) buttons to adjust the temperature
4. Repeat the steps in #2 and #3 for each setting you want to change
5. The operating panel will automatically exit programming mode after being
idle for 10 seconds.
Replacing the Charcoal Filter
Located on the back wall of your wine cellar, Turn
counterclockwise to unlock, then remove. Replace with a
new filter, turn clockwise to lock in place. Reorder part #:
264 08 44 at www.WineEnthusiast.com
Interior Light
• To complement the look of your wine collection, a soft light has been built
into the wine and beverage cooler. Simply push the "Light" button and the
light comes on, push again for off. For maximum energy efficiency, leave
light off when not viewing your collection.

Technical Data
Total Volume
13.42 Cu. Ft.
Installation
Free-Standing or Built-In
Power
115V~60Hz
Current
1.6A
Protection Class
I
Climate Class
SN/N/ST
Start-Up Amps
9.3A
Ambient Temperature
60°F - 90°F
Refrigerant
R600a –1.83 oz.
Temperature Control Range
41°F - 72°F
L
Approx. Net Weight
258 LBS
Dimensions (H x W x D)
77.6” x 23.5” x 26.8”

Proper Wine and Beverage Cooler Care
and Cleaning
Cleaning and Maintenance
Warning: To avoid electric shock always unplug your appliance before
cleaning. Ignoring this warning may result in death or injury.
Caution: Before using cleaning products, always read and follow
manufacturer’s instructions and warnings to avoid personal
injury or product damage.
General: • Prepare a cleaning solution of 3-4 tablespoons of baking soda
mixed with warm water. Use sponge or soft cloth, dampened
with the cleaning solution, to wipe down your wine and beverage
cooler.
• Rinse with clean warm water and dry with a soft cloth.
• Do not use harsh chemicals, abrasives, ammonia, chlorine
bleach, concentrated detergents, solvents or metal scouring
pads. Some of these chemicals may dissolve, damage and/or
discolor your wine and beverage cooler.
Mold on the interior
Microscopic mold spores are naturally occurring and present in
the ambient air. When mold gets in your wine cellar it may grow
within the humid environment. Removal can be completed with
mild solutions of commonly available products such as Borax,
vinegar, or baking soda.
Door Gaskets:
• Clean door gaskets every three months according to general
instructions. Gaskets must be kept clean and pliable to assure a
proper seal.

• Petroleum jelly applied lightly on the hinge side of gaskets will
keep the gasket pliable and assure a good seal.
Power Interruptions
• Occasionally there may be power interruptions due to thunderstorms or
other causes. Remove the power cord from AC outlet when a power outage
occurs. When power has been restored, wait 3 to 5 minutes then re-plug
the power cord to AC outlet.
Vacation and Moving Care
• For long vacations or absences, unplug the wine and beverage cooler and
clean the unit and door gaskets according to "General cleaning" section.
Leave doors open, so air can circulate inside.
• When moving always move the appliance vertically. Do not move with the
unit lying down, as possible damage to the sealed system could occur.
Note: After moving, wait for 24 hours before plugging in the wine and
beverage cooler.
Normal Operating Sounds You May Hear
• Boiling water, gurgling sounds or slight vibrations that are the result of the
refrigerant circulating through the cooling coils.
• The thermostat control will click when it cycles on and off.

Troubleshooting
Many common issues with your wine and beverage cooler can be easily solved. Try
the troubleshooting tips below if you experience any problems.
Appliance Does Not Operate:
• Check if unit is plugged in.
• Check if there is power in the AC outlet, by checking the circuit
breaker.
Wine or drawers appear too warm:
• Frequent door openings.
• Allow time for recently added wine to reach desired temperature.
• Check gaskets for proper seal.
• Clean condenser coils.
• Adjust temperature control to colder setting.
Temperature is too cold:
• If temperature control setting is too cold, adjust to a warmer setting.
Appliance runs too frequently:
• This may be normal to maintain constant temperature during high
temperature and humid days.
• Doors may have been opened frequently or for an extended period of
time.
• Clean condenser coils.
• Check gasket for proper seal.
• Check to see if doors are completely closed.

Moisture build-up on interior or exterior of the wine and
beverage cooler:
• This is normal during high humidity periods.
• Prolonged or frequent door openings.
• Check door gaskets for proper seal.
Appliance door does not shut properly:
• Level the appliance.
• Check for blockages e.g. wine bottles, shelves.

Limited Warranty
This Warranty Covers Appliances Within The
Continental United States Only.
Length of Warranty: This Limited Warranty lasts for one (1) year from date of
receipt of purchase of the appliance (“Limited Warranty Period”) and the sealed system
(compressor, condenser, evaporator) will be covered for three (3) years. Extended
warranties may be available for an additional cost at the time of purchase or up to 30 days
from date of purchase. These extended warranties would extend this one (1) year limited
warranty to two (2), three (3), or five (5) years. Details about our extended protection
plans can be found @ wineenthusiast.com.
Who is Protected: This Limited Warranty protects the original purchaser during the
Limited Warranty Period, provided that such purchaser can present appropriate proof of
original purchase.
What is Covered: This Limited Warranty covers any defects in workmanship or materials
in your new wine and beverage cooler under normal use.
What is Not Covered: The following are not covered by this Limited Warranty damage due
to such things as accident, misuse, abuse, mishandling, neglect, unauthorized repair, failure
to properly maintain, acts of God or any other cause beyond the reasonable control of the
Wine Enthusiast whether similar or dissimilar to the foregoing.
Commercial use or use other than normal household or small office.
Purchaser understands and acknowledges that the wine and beverage cooler is a wine
refrigerator, which houses wine. Purchaser assumes all the risk of using these units,
including risk of spoilage, humidity variations, temperature variations, leaks, fires, water
damage, mold, mildew, dryness and similar perils that may occur.
What We Will Do: During the Limited Warranty Period, Wine Enthusiast and/or the
manufacturer will, at its sole discretion, repair or replace any wine and beverage cooler not
operating within the manufacturer’s specifications. All costs for labor and materials thereto
shall be covered during the Limited Warranty Period. If Wine Enthusiast deems the
appliance is not repairable, Wine Enthusiast will use the value of your original order toward
a replacement; provided, however, that the purchaser will be responsible for all shipping
and handling costs with respect to the replacement after the initial ninety (90) days after
the date of receipt of original purchase. After the initial ninety (90) day period after
the date of receipt of purchase, purchaser must pay any shipping and handling
charges that are incurred in shipping or transporting the wine and beverage cooler

for service under this Limited Warranty. Wine Enthusiast reserves the right to
substitute materials of substantially similar quality in the event that identical materials are
not available at the time the Limited Warranty services are performed. Wine Enthusiast
reserves the right to request that purchaser contact a local refrigeration company to service
the appliance.
How to get Warranty Service: In the event your appliance is not operating within the
manufacturer’s specifications, during the Warranty Period, contact customer service by
email at [e-mail] or by phone [phone].
Limitation of Implied Warranties: All implied warranties, including warranties of
merchantability and fitness for a particular purpose, are limited in duration to the length of
this Limited Warranty.
Exclusion of Certain Damages: Wine Enthusiast’s liability is limited to replacement or
repair of the defective appliance. Wine Enthusiast shall not be liable for any damages,
whether incidental, consequential or otherwise, because of any defective wine and beverage
cooler.
How State Law Applies: Some states do not allow limitations on how long an implied
warranty lasts and/or do not allow the exclusion of incidental or consequential damages, so
the above limitations and exclusions may not apply to you. The Limited Warranty gives you
specific legal rights, and you may also have other rights which vary from state to state.
Wine Enthusiast
Valhalla, NY 10595