WineEnthusiast 495 15 05 User manual

Electric Blue One
Full Automatic Wine Opener and Preserver with Drawer Base
Model: 495 15 05
INSTRUCTION MANUAL
Package includes:
a) 1 x Wine Opener and preserver all in one e) 1 x Soft Grip Foil Cutter
b) 1 x Charging base with drawer f) 1 x Power Adaptor
c) 2 x Wine Stoppers g) 1 x Instruction manual
d)1 x Aerator/ Pourer
• If you find any of the above is missing, please contact your retailer
Full Automatic Wine Opener
Vacuum Preserver
Charging Base
Battery Capacity Display
Base with Drawer
Foil cutter
Stoppers
Aerator/ Pouer
Power adaptor

IMPORTANT SAFETY INSTRUCTIONS
Please read these instructions thoroughly before using the product.
1. This Wine Opener and Wine Preserver Set is intended for household use only.
2. This Wine Opener and Wine Preserver Set is intended to extract the corks from standard 750MLwine bottles.
3. Do not operate the Wine Opener and Wine Preserver Set with a damaged AC/DC Adapter or Charging Base. If the AC/DC Adapter is damaged it
must be replaced by the manufacturer.
4. Do not place the appliance near an open flame, cooking or heating appliance, or hot surface.
5. This appliance is not intended for use in wet or damp conditions.
6. Ensure that the power cord is positioned so that it will not get damaged or cause a trip hazard.
7. Use only the AC/DC Adapter and Charging Base supplied with the appliance.
8. Do not immerse the appliance in water or any other liquid.
9. For indoor use only. Do not expose the Wine Opener and Wine Preserver Set or Charging Base to rain or other extreme conditions.
10. Never force the Wine Opener and Wine Preserver Set onto a bottle or attempt to speed up the mechanism. The Cork Remover will work best when
it is operated at its intended speed.
11. Do not touch or adjust the Wine Opener and Wine Preserver Set mechanism or the corkscrew spiral. Only hold the Cork Remover by its plastic
housing.
12. This appliance contains a re-chargeable battery. Do not dispose of the product on a fire as this may cause an explosion.
13. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience
and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
14. To avoid electric shock do not open the casing. There are no user serviceable parts inside.
CAUTION: The corkscrew is sharp. Keep body parts (e.g. fingers) and utensils away from the operating end of the Wine Opener.

OPERATION
1. Charging the Wine Opener and Wine Preserver Unit
It is recommended that the Wine Opener and Wine Preserver unit is charged for at least 12 hours before using it for the first time. Please follow the
instructions for charging the unit below:
Connect the DC Power Plug into the DC Power Socket at the back of the Charging Base.
Place the Wine Opener and Wine Preserver Unit into the Charging Base. Ensure that the arrows on the Unit and Base align with each other so that
the electrical connections are made correctly.
Insert the AC/DC Adapter into a mains socket and switch on the power supply.
The Charging Indicator will illuminate blue, indicating that the battery is charging. It will take 10-12 hours to fully charge the battery.
To stop charging, switch off the supply and remove the AC/DC Adapter from the mains socket. Remove the DC Power Plug from the Charging
Base.
The Wine Opener can be used to open up to 30 bottles when fully charged.
Note: This wine opener has intelligent light features and uses:
Battery display is included on the Wine Opener. When the batteryis fully charged, 4 bars on the battery display will become solid blue. When the battery is low,
only one bar will light blue. When the battery is low, you are advised to place the unit back on the charging base and the bars will blink. Once fully charged
again the bars will remain solid blue.
Remark: The action blue led light that shines in the transparent part of the unit will constantly light up when the unit is on the charger. It also lights up when the
product is opening a bottle.
- - -

When unit is completely charged , four panels will become solid blue. It will take about 10 hours to fully charge the battery.
2. Opening a Wine Bottle with the Wine Opener
Before extracting the cork please remove any seal from the bottle using the Foil Cutter provided (see Fig.2)
Place the Wine Opener on top of the wine bottle making sure that it remains as upright as possible at all times. If you hold the Wine Opener at an
angle to the bottle it will not remove the cork properly. (see Fig.3)
Hold the Wine Opener with one hand and the wine bottle firmly with the other hand. Simply place the corkscrew on top of the bottle in line with the
cork. The corkscrew spiral will then automatically activate and turn in a clockwise direction to enter the cork, and then gradually remove it from the
bottle. When the Wine Opener mechanism stops, the cork will be visible through the transparent window and the blue indicator will go off.
Note: Dont try to remove the Opener if cork is not released fully.

Lift the Wine Opener away from the bottle. The cork will then automatically release from the bottle, and the spiral will turn in a counter-clockwise
direction and release the cork. (see Fig.4)
Return the Wine Opener to the Charging Base when not in use, so as to protect the mechanism.
This Wine Opener is designed for use with traditional corks, but it may be used with synthetic corks as well. Synthetic corks are smaller and do
not expand like normal cork so sometimes they may stick on the spiral. If this happens, please insert the provided Reset Tool and into the Reset

Hole under the Battery Capacity Display. The wine opener will activate for several seconds turning counter -clockwise to allow the worm to be
slowly released.

3. Serve Wine by Aerator Pourer
Place theAerating pourer into the bottle neck snugly to allow the wine to pour smoothly without splashing the drinker or other places.
Note: Use the pourer /aerator to enhance the flavor of your wine.
4. Sealing a wine bottle with the Vacuum Preserver
Note: Vacuum Preserver will keep wine fresh for up to 3-5 days
Operating Process
1).Place the wine bottle on a flat surface.
2).Insert a wine stopper into the wine bottle (Fig.1).
Fig.1
3). Hold the wine stopper & wine bottle neck securely in one hand and place the non-slip mouth of the Wine Preserver on the wine stopper (Fig.2).
Please use light, steady pressure on the stopper when using the electric wine preserver.

Fig.2
4). Keep the Vacuum Preserver as straight as possible and in line with the wine bottle.
5). Push down on the wine stopper using light, steady pressure and press the power ‘on’ button at the same time.
6). The Wine Preserver starts to work removing the air from the bottle while making a vacuum noise. The blue vacuum indication light on the top will light up while in
use.
7). The motor will stop working after 15 seconds. The beep will sound when the motor stops.
8). Do not remove the unit from the bottle unit the motor stops.
9). Remove the Wine Preserver and replace on its charging base until it is needed again.
Note: The non-slip mouth may attach itself to the wine stopper. In this case, hold the wine stopper and the neck of the bottle
securely in one hand and tilt the Wine Preserver away from the wine stopper to break the suction. This should prevent air
from re-entering the bottle. If in doubt, repeat the above operating process.
Suggestion: For more than half a bottle of wine remaining –one session should suffice. For less than half a bottle we suggest you repeat the above process a 2nd
time.
4Date Indicators
1. Use the “ ▼ ” symbol to indicate the date when the bottle was sealed with your Wine Vacuum Preserver.
2. Gently swivel the silver ring to left or right until the correct date is in line with the “ ▼ ” symbol (Fig.3).

Fig.3
Opening
• Firmly hold the bottle in one hand and gently ease the wine stopper away from the bottle with the other hand.
• Store the wine stoppers in a clean safe place until next required.
After Use
• We recommend that you return your Wine Opener and Wine Vacuum Preserver to the Charging base so that it is fully charged and available to use at any time.
•Wipe the Wine Opener and Wine Vacuum Preserver Set and Charging Base with a soft, dry cloth.
Battery & Product Disposal Information
• This Wine Set contains rechargeable batteries. Before you dispose of your Wine Opener and Wine Vacuum Preserver ,you should remove the batteries and dispose
of them responsibly. To take out the battery pack remove the screws from the rear cover. Dispose of the rechargeable batteries and product responsibly.
Recycling and Disposal
The WEEE directive (Waste Electrical and Electronic Equipment; 2002/96/EC) has been put in place to ensure that products are recycled using best available
treatment, recovery and recycling techniques to ensure human health and high level environment protection. Your product is designed and manufactured with
high quality materials and components, which can be recycled and reused.
Do not mix products bearing the crossed out bin symbol with your general household waste. Please recycle where facilities exist. Check with your Local Authority or
retailer for recycling advice.

Specification
Model No: 495 15 05
Voltage: Product :3.6V Adaptor output: 6V DC 150mA
Frequency: Adaptor 100-240V AC50/ 60 Hz
Power: Product 10.8W
Net Weight: 900g
Dimensions (unit + stand): 170×125×305mm