Winmate IBDRW100-EL User manual

1
Preface
DIN Rail Box PC
IBDRW100-EL
Intel® Elkhart Lake Celeron® N6210 1.2GHz, up to 2.6 GHz
Intel® Elkhart Lake ATOM® x6425E 2.0GHz, up to 3.0 GHz
User Manual
Version 1.1
Document Part No. 91711110101Z

Contents
Preface............................................................................................................................................3
About This User Manual................................................................................................................6
Chapter 1: Introduction .................................................................................................................7
1.1 Product Overview.......................................................................................................................7
1.2 Product Features .......................................................................................................................7
1.3 Accessories................................................................................................................................7
1.4 Chassis Dimensions ..................................................................................................................8
1.5 Description of Parts....................................................................................................................9
Chapter 2: Hardware Installation................................................................................................10
2.1 Connectors Description............................................................................................................10
2.1.1 USB 3.2 Gen2x1 Connector............................................................................................10
2.1.2 RJ-45 for LAN Connector ................................................................................................10
2.1.4 VGA Connector ...............................................................................................................10
2.1.5 Serial Port RS-232/422/485 Connector ...........................................................................11
2.1.6 Isolated RS422/485 Connector........................................................................................11
2.1.7 Audio Jack.......................................................................................................................11
2.1.8 DIDO Connector..............................................................................................................12
2.1.9 DC Power 3pin Terminal Block........................................................................................12
2.2 Configuring COM2 Settings by Jumpers..................................................................................13
Chapter 3: Initial Setup................................................................................................................14
3.1 DIN Rail Mounting Setup..........................................................................................................14
Chapter 4: Insyde BIOS Setup....................................................................................................15
4.1 BIOS Introduction.....................................................................................................................15
4.1.1 BIOS Setup and Boot Procedure.....................................................................................15
4.1.2 BIOS Setup Keys.............................................................................................................15
4.2 BIOS Menu ..............................................................................................................................16
4.2.1 Main.................................................................................................................................16
4.2.2 Advanced.........................................................................................................................17
4.2.4 Security............................................................................................................................30
4.2.5 Power ..............................................................................................................................31
4.2.6 Boot.................................................................................................................................32
4.2.7 Exit...................................................................................................................................33
4.3 Using Recovery Wizard to Restore the System.......................................................................34
Chapter 5: Driver Installation......................................................................................................35
5.1 Chipset DriverInstallation.........................................................................................................35
5.2 Graphics DriverInstallation......................................................................................................38
5.3 Management Engine (ME) Installation.....................................................................................42
5.4 SST DriverInstallation..............................................................................................................45
5.5 Audio DriverInstallation ...........................................................................................................48
Appendix.......................................................................................................................................66
Appendix A: Hardware Specifications............................................................................................66
Appendix B: Approvals and Certifications......................................................................................67

3
Preface
Preface
Copyright Notice
No part of this document may be reproduced, copied, translated, or transmitted in any form or by
any means, electronic or mechanical, for any purpose, without the prior written permission of the
original manufacturer.
Trademark Acknowledgement
Brand and product names are trademarks or registered trademarks of their respective owners.
Disclaimer
We reserve the right to make changes, without notice, to any product, including circuits and/or
software described or contained in this manual in order to improve design and/or performance. We
assume no responsibility or liability for the use of the described product(s) conveys no license or
title under any patent, copyright, or masks work rights to these products, and make no
representations or warranties that these products are free from patent, copyright, or mask work
right infringement, unless otherwise specified. Applications that are described in this manual are
for illustration purposes only. We make no representation or guarantee that such application will
be suitable for the specified use without further testing or modification.
Warranty
Our warranty guarantees that each of its products will be free from material and workmanship
defects for a period of one year from the invoice date. If the customer discovers a defect, we will,
at his/her option, repair or replace the defective product at no charge to the customer, provide it is
returned during the warranty period of one year, with transportation charges prepaid. The returned
product must be properly packaged in its original packaging to obtain warranty service. If the serial
number and the product shipping data differ by over 30 days, the in-warranty service will be made
according to the shipping date. In the serial numbers the third and fourth two digits give the year of
manufacture, and the fifth digit means the month (e. g., with A for October, B for November and C
for December).
For example, the serial number 1W16Axxxxxxxx means October of year 2016.
Customer Service
We provide a service guide for any problem by the following steps: First, visit the website of our
distributor to find the update information about the product. Second, contact with your distributor,
sales representative, or our customer service center for technical support if you need additional
assistance.
You may need the following information ready before you call:
•Product serial number
•Software (OS, version, application software, etc.)
•Description of complete problem
•The exact wording of any error messages
In addition, free technical support is available from our engineers every business day. We are
always ready to give advice on application requirements or specific information on the installation

and operation of any of our products.
Advisory Conventions
Four types of advisories are used throughout the user manual to provide helpful information or to
alert you to the potential for hardware damage or personal injury. These are Notes, Important,
Cautions, and Warnings. The following is an example of each type of advisory.
Note:
A note is used to emphasize helpful information
Important:
An important note indicates information that is important for you to know.
Caution A Caution alert indicates potential damage to hardware and explains how
to avoid the potential problem.
Attention Une alerte d’attention indique un dommage possible à l’équipement et
explique comment éviter le problème potentiel.
Warning! An Electrical Shock Warning indicates the potential harm from electrical
hazards and how to avoid the potential problem.
Avertissement! Un Avertissement de Choc Électrique indique le potentiel de
chocs sur des emplacements électriques et comment éviter ces problèmes.
Safety Information
Warning! Always completely disconnect the power cord from your chassis
whenever you work with the hardware. Do not make connections while the power is
on. Sensitive electronic components can be damaged by sudden power surges. Only
experienced electronics personnel should open the PC chassis.
Avertissement! Toujours débrancher le cordon d’alimentation du chassis lorsque
vous travaillez sur celui-ci. Ne pas brancher de connections lorsque l’alimentation est
présente. Des composantes électroniques sensibles peuvent être endommagées par
des sauts d’alimentation. Seulement du personnel expérimenté devrait ouvrir ces
chassis.
Caution Always ground yourself to remove any static charge before touching the
CPU card. Modern electronic devices are very sensitive to static electric charges. As
a safety precaution, use a grounding wrist strap at all times. Place all electronic
components in a static-dissipative surface or static-shielded bag when they are not in
the chassis.
Attention Toujours verifier votre mise à la terre afin d’éliminer toute charge
statique avant de toucher la carte CPU. Les équipements électroniques moderns
sont très sensibles aux décharges d’électricité statique. Toujours utiliser un bracelet
de mise à la terre comme précaution. Placer toutes les composantes électroniques
sur une surface conçue pour dissiper les charge, ou dans un sac anti-statique
lorsqu’elles ne sont pas dans le chassis.
Alternating Current The Protective Conductor Terminal (Earth Ground) symbol
indicates the potential risk of serious electrical shock due to improper grounding.
Mise à le terre ! Le symbole de Mise à Terre indique le risqué potential de choc
électrique grave à la terre incorrecte.

5
Preface
Safety Precautions
For your safety carefully read all the safety instructions before using the device. Keep this user
manual for future reference.
•Replacement of a battery with an incorrect type that can defeat a safeguard
•Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery,
that can result in an explosion
•Leaving a battery in an extremely high temperature surrounding environment that can result
in an explosion or the leakage of flammable liquid or gas
•A battery subjected to extremely low air pressure that may result in an explosion or the
leakage of flammable liquid or gas
•Caution: Risk of fire or explosion if the battery is replaced by an incorrect type
•Always disconnect this equipment from any AC outlet before cleaning. Do not use liquid or
spray detergents for cleaning. Use a damp cloth.
•For pluggable equipment, the power outlet must be installed near the equipment and must be
easily accessible.
•Keep this equipment away from humidity.
•Put this equipment on a reliable surface during installation. Dropping it or letting it fall could
cause damage.
•The openings on the enclosure are for air convection and to protect the equipment from
overheating.
Caution Do not cover the openings!
Attention Ne couvrez pas les ouvertures!
•Before connecting the equipment to the power outlet make sure the voltage of the power
source is correct.
•Position the power cord so that people cannot step on it. Do not place anything over the
power cord.
•If the equipment is not used for a long time, disconnect it from the power source to avoid
damage by transient over-voltage.
•Never pour any liquid into an opening. This could cause fire or electrical shock.
•Never open the equipment. For safety reasons, only qualified service personnel should open
the equipment.
•All cautions and warnings on the equipment should be noted.
Caution Always ground yourself to remove any static charge before touching
the board. Modern electronic devices are very sensitive to static electric charges.
As a safety precaution, use a grounding wrist strap at all times. Place all
electronic components in a static-dissipative surface or static-shielded bag when
they are not in the chassis.
Attention Mettez-vous toujours à la terre pour éliminer toute charge statique avant
de toucher la carte. Les appareils électroniques modernes sont très sensibles aux
charges électriques statiques. Par mesure de sécurité, utilisez en tout temps un
bracelet antistatique. Placez tous les composants électroniques dans une surface
antistatique ou dans un sac blindé antistatique lorsqu'ils ne sont pas dans le châssis.
General Guideline
It is recommended to reboot the device when some functions are defect or inactive. If it still
can't solve the problems please contact your dealer or agent.

About This User Manual
This User Manual provides information about using the IBDRW100-EL Series DIN Rail Box
PC. This User Manual applies to the IBDRW100-EL Series DIN Rail Box PC - IBDRW100-EL.
The documentation set for the IBDRW100-EL Series DIN Rail Box PC provides information for
specific user needs, and includes:
•User Manual –contains detailed description on how to use the IBDRW100-EL Series
DIN Rail Box PC, its components and features.
Note:
Some pictures in this guide are samples and can differ from actual product.

7
Chapter 1: Introduction
Chapter 1: Introduction
1.1 Product Overview
Winmate IBDRW100-EL Series is a DIN-rail mounted Fanless Box PC, which provides several
serial communication ports. With a compact size and small form factor as well as front accessible
I/O port. The IBDRW100-EL Series is very convenient for wiring and DIN-rail installation in the
control cabinet. The wide operation temperature and Industrial serial port design makes this unit a
perfect communication even in harsh and critical location. The IBDRW100-EL Series are certified
to support the ecosystem of AWS IoT Greengrass giving customers more options for software
integration for IoT applications.
1.2 Product Features
Highlights
•Designed for industrial automation, DIN Rail applications
•Intel Elkhart Lake N6210, 2 [email protected] GHz, up to 2,6 GHz (TDP=6.5W)
•Intel Elkhart Lake x6425E, 4 Core@ 2.0 GHz, up to 3.0 GHz (TDP=12W)
•1 x RS232 / 422 / 485 communications, select thru BIOS
•4 x LAN, 3 x USB 3.2 Gen2x1, 1 x USB 2.0
•1 x VGA, 1 x Line out, 1 x Line in, 1 x Mic in, 1 x Power Jack
•Fanless, streamlined enclosure for highly efficient heat dissipation
•Rated for wide temperature use -20˚C to 60˚C
•Certified AWS loT Greengrass
1.3 Accessories
•AC to DC 12V 84W
Power Adapter (For
testing only)
•Power Cord
•Terminal Block 3
pin to 2.5 Ø Female
Adapter Cable
•Open Wire Power
Cable
Part No. 922D084W12V1
Varies by the country
Part No. 94J602G030K0
Part No. 94EL02X020E0
•User Manual
•DIN Rail Mounting
Clip
•Terminal Block 10
pin Female
Connector for
DIDO x 2
•Terminal Block 3
pin Connector for
Power
Part No. 91711110101Z
Part No. 90ME01000000
Part No. 604530005D01
Part No.604520105001

1.4 Chassis Dimensions
Unit: mm

9
Chapter 1: Introduction
1.5 Description of Parts
Front
Rear
1. VGA
2. COM1 RS232 default (RS422/485
selected by BIOS setting)
3. LAN x 2
4. LAN x 2
5. USB 2.0 x 1
6. USB 3.2 Gen2x1 x 3
7. Audio Jack
8. Antenna
9. Reset button
10. Power LED
11. HDD LED
12. COM2 Isolated RS422 default
(RS485 selected by jumper)
13. DIDO (9 in, 9 out)
1. 14. Power Terminal Block

Chapter 2: Hardware Installation
2.1 Connectors Description
This section describes pin assignment and signal names of IBDRW100-EL interfaces.
2.1.1 USB 3.2 Gen2x1 Connector
The IBDRW100-EL provide three USB 3.2 Gen2x1 connectors. Use USB 3.0 connector to
connect external devices such as mouse or keyboard to the box computer.
Pin assignment and signal names of USB connector
2.1.2 RJ-45 for LAN Connector
The IBDRW100-EL has four LAN connectors located on the front. Ethernet ports provide a
standard RJ45 jack connector with LED indicators on the front side to show its Active/ Link status
and Speed status.
Pin assignment and signal names of Ethernet connector
10/100 Mbps- Green
1G Mbps –Orange
2.1.4 VGA Connector
The IBDRW100-EL have one VGA DB15 connector. Use VGA cable to connect DIN-Rail Box
Computer to external monitor.
Pin assignment and signal names of VGA connector
Maximum resolution (VGA)
1920 x 1200 @60 HZ
Pin №
Signal Name
Pin №
Signal Name
1
+5V
2
USB_D-
3
USB_D+
4
GND
5
STDA_SSRX-
6
STDA_SSRX+
7
GND
8
STDA_SSTX-
9
STDA_SSTX+
Pin №
Signal Name
Pin №
Signal Name
1
TX1+
2
TX1-
3
TX2+
4
TX3+
5
TX3-
6
TX2-
7
TX4+
8
TX4-
Pin №
Signal Name
Pin №
Signal Name
1
RED
2
GREEN
3
BLUE
4
NC
5
GND
6
GND
7
GND
8
GND
9
+5V
10
GND
11
NC
12
SDA
13
HSYNC
14
VSYNC
15
SCL

11
Chapter 2: Hardware Installation
2.1.5 Serial Port RS-232/422/485 Connector
The IBDRW100-EL have one COM1 9-pin D-sub connectors that offer RS-232/422/485 serial
communication interface ports. Default setting is RS-232, but this can be modified by BIOS.
Pin assignment and signal names of RS-232/422/485 connector
2.1.6 Isolated RS422/485 Connector
The IBDRW100-EL have one isolated COM2 9-pin D-sub connectors that offer RS-422/485 serial
communication interface ports. Default setting is RS-422, but this can be modified by jumpers.
Pin assignment and signal names of isolated RS-422/485 connector
2.1.7 Audio Jack
The IBDRW100-EL have has three stereo audio ports with audio jack connectors: Mic-in, Line-
out, Line-in.
Pin assignment and signal names of audio jack
Pin №
RS-232
(Default)
RS422
RS485
1
DCD
Tx-
DATA-
2
RXD
Tx+
DATA+
3
TXD
RX+
NC
4
DTR
RX-
NC
5
GND
GND
GND
6
DSR
NC
NC
7
RTS
NC
NC
8
CTS
NC
NC
9
RI
NC
NC
Pin №
RS422
RS485
1
Tx-
DATA-
2
Tx+
DATA+
3
RX+
NC
4
RX-
NC
5
GND
GND
6
NC
NC
7
NC
NC
8
NC
NC
9
NC
NC
Color
Signal Name
BLUE
Line-in
GREEN
Line-out
PINK
Mic-in

2.1.8 DIDO Connector
Pin assignment and signal names of DIDO connector
2.1.9 DC Power 3pin Terminal Block
The DC power source input of the IBDRW100-EL is a 3-pin terminal block connector that
supports 9-36V DC power input.
Pin assignment and signal names of DC power 3pin terminal block
Pin №
Signal Name
Pin №
Signal Name
1
GND
8
DINT1
2
DIO_5V
9
DINT2
3
DOUT3
10
DINT0
4
DOUT1
11
GPIO53_IN0
5
DOUT2
12
GPIO56_OUT0
6
DOUT0
13
GPIO54_IN1
7
DINT3
14
GPIO57_OUT1
Voltage
Minimum Voltage 9V
Maximum Voltage 36V

13
Chapter 2: Hardware Installation
2.2 Configuring COM2 Settings by Jumpers
Serial Port COM2 can be configured for RS-422 or RS-485 by jumpers. Jumpers are located on
the motherboard. You need to open the housing in order to access the jumpers.
Caution It is recommended to use factory jumper settings. Opening the housing
when it is sealed may damage the device and its parts.
Attention Il est recommandé d’utiliser la configuration d’usine de cavalier. Ouvrir
le chassis lorsqu’il est scellé peut endommagé l’appareil et ses pièces.
Note: A pair of needle nose pliers may be helpful when working with jumpers. If
you have any doubts about the best hardware configuration for your application,
contact your local distributor or sales representative before you make any changes.
Generally, you simply need a standard cable to make most connections.
The jumper setting diagram is shown below. When the jumper cap is placed on both pins, the
jumper is SHORT. The illustration below shows a 3-pin jumper; pins 1 and 2 are short. If you
remove the jumper cap, the jumper is OPEN.
PIN 1-2 SHORT
PIN 3 OPEN
COM2 Jumper
RS422/485 Terminal Resistor (JP3, JP5)
Location
Header Type
Description
Function
JP3
JP5
Header 3*1
Terminal Resistor
1-2: Normal
2-3: Connector
※Default: 1-2
Select RS422/485 (JP4, JP6, JP7)
Location
Header Type
Description
Function
JP4
JP6
JP7
Header 3*1
Selection RS422
/ RS485
1-2: RS485
2-3: RS422
※Default: 1-2
JP3/JP4
JP5/JP6
JP7

Chapter 3: Initial Setup
3.1 DIN Rail Mounting Setup
Please follow these steps to mount the IBDRW hook kit on a DIN rail
1. Screw the provided DIN-rail Kit on the rear side of the box as the diagram shown below.
2. Please make sure the stiff metal handle part is located on the top.
3. Press the stiff metal handle downward and insert the hook into the DIN-rail.
4. Release the handle so it can snap into place as shown below.

15
Chapter 4: Insyde BIOS Setup
Chapter 4: Insyde BIOS Setup
4.1 BIOS Introduction
4.1.1 BIOS Setup and Boot Procedure
BIOS stand for “Basic Input Output System” and it is the most basic communication between user
and the hardware. To enter BIOS Setup, the [DEL] key must be pressed after the USB controller
has been initialized as soon as the following message appears on the monitor during Power On
Self-Test (POST): “Press DEL to run SETUP”
Note: BIOS version update may be published after the manual is released. Please visit Winmate
Download Center to check the latest version of BIOS. User may need to run BIOS setup
utility for the following status:
1. Error message on screen indicate to check BIOS Setup
2. Restoring the Factory default setting
3. Modifying the specific hardware specification
4. Want to optimize the specification
4.1.2 BIOS Setup Keys
The following keys are enabled during POST:
Key
Function
Del
Enters the BIOS setup menu
F7
Display the boot menu. Lists all bootable devices that are connected to the
system. With cursor ↑ and cursor ↓ and by pressing <ENTER>, select the
device used for the boot
Pause
Pressing the [Pause] key stops the POST. Press any other key to
resume the POST.
The following keys can be used after entering the BIOS Setup:
Key
Function
F1
General Help
F2
Previous Values
F3
Optimized Defaults
F4
Save & Exit
Esc
Exit
+/-
Change Opt.
Enter
Select or execute command
Cursor ↑
Moves to the previous item
Cursor ↓
Goes to the next item
Cursor ←
Moves to the previous item
Cursor →
Goes to the next item

4.2 BIOS Menu
4.2.1 Main
Immediately after the [DEL] key is pressed during startup to show the main BIOS setup menu:
BIOS Setting
Description
Setting Options
Effect
Language
Select the current default
language by the
Insyde20
Adjustment of the
language. Default:
English.
Set the default
language
System Time
The time is maintained by
the battery when the
device is turned off.
Adjustment of the
time
Set the time in the
format [hh:mm:ss]
System Date
This is current date
setting. The time is
maintained by the
battery when the device
is turned off
Changes to the date
Set the date in the
format
[mm/dd/yyyy]

17
Chapter 4: Insyde BIOS Setup
4.2.2 Advanced
BIOS Setting
Description
Setting Option
Effect
CPU Configuration
Configures Trusted
Computing parameters
Enter
Opens
submenu
Power& Performance
Configures Power &
Performance parameters
Enter
Opens
submenu
System Agent Configuration
Configures System Agent
Configuration parameters
Enter
Opens
submenu
PCH-OI Configuration
Configures PCH-OI
parameters
Enter
Opens
submenu
PCH-FM Configuration
Configures PCH-FM
parameters
Enter
Opens
submenu
S10 F81968
Configures S10 F81968
parameters
Enter
Opens
submenu

4.2.2.1 CPU Configuration
BIOS Setting
Description
Setting Option
Effect
Intel (VMX)
Virtualization
Technology
Enable or disable Intel
Virtualization
Technology.
Enable/Disable
When enabled, a VMM
can utilize the additional
hardware capabilities
provided by Vander pool
Technology.
Active
Processor
Cores
Number of core to
enable in each
processor package
AII / 1 / 2/ 3
Select number of core to
enable in each
processor package
Hyper
Threading
Intel Hyper-Threading
Technology allows a
single processor to
execute two or more
separate threads
concurrently.
Enable / Disable
Enable or disable Hyper
Threading
AES
Enable or disable AES
(Advanced Encyption
Standard)
Enable/Disable
Enable or disable AES

19
Chapter 4: Insyde BIOS Setup
4.2.2.2 CPU Power Management Configuration
BIOS Setting
Description
Setting Option
Effect
Boot
Performance
Mode
Configure Boot
Performance Mode
parameters
-Max non-turbo
performance
-Max battery
-Turbo
Performance
Select the performance
state that the BIOS will
set starting from reset
vector
Intel Speed
Step (ta)
Configure Intel Speed
Step (ta) parameters
Enabled/
Disabled
Allows more than two
frequency ranges to be
supported
Intel Speed
Shift
Technology
Configure Intel Speed
Shift Technology
parameters
Enabled/
Disabled
Enable/ Disable Intel
Speed Shift Technology
support. Enabling will
expose the CPP v2
interface to allow for
hardware controlled P-
states
-Turbo Mode
Enable or disable
Turbo Mode
Enabled/
Disabled
Enable/ Disable
processor Turbo Mode
(requires EMTTM
enabled too). Auto
means enabled, unless
max turbo ratio is bigger
than 16 –SKL AO W/A
C states
Enable or disable
C states
Enabled/
Disabled
Enable/ Disable CPU
Power Management.
Allows COU to go to C

states when it is not
100% utilized
Custom P-state
Table
Configure Custom P-
state Table parameters
Enter
Enters sub-menu
-Number of P-
states
Select the number of
custom P-states.
[Number]
Set the number of
custom P-states. At least
2 states must be present
4.2.2.3 System Agent Configuration
BIOS Setting
Description
Setting Option
Effect
Vt-d
Intel® Virtualization
Technology for
Directed I/O
Enabled
Disabled
Vt-d capability