Winners Only T2-VT100C G Series Quick start guide

PARTS LIST
OFS-16031-TDGWC MADE IN MALAYSIA
Page 1 of 2
T2-VT100C--G,T2-SF100C--C,T2-AP100C--G
COFFEE TABLE WITH 2 DRAWERS
PART NO FIGURE DESCRIPTION QTY
Legs
Table Top 1 pce
4 pcs
1 pce
T2-VT100C-01,
T2-SF100C-01,
T2-AP100C-01
T2-VT100C-13,
T2-SF100C-13,
T2-AP100C-13
T2-VT100C-13,
T2-SF100C-13,
T2-AP100C-13
T2-VT100C-07,
T2-SF100C-07,
T2-AP100C-07
T2-VT100C-07,
T2-SF100C-07,
T2-AP100C-07
T2-VT100C-22,
T2-SF100C-22,
T2-AP100C-22
T2-VT100C-22,
T2-SF100C-22,
T2-AP100C-22
Hardware Bag 1 pce
Fixed Shelf
IMPORTANT NOTE : Please keep all hardware parts out of the reach of children.

OFS-16031-TDGWC
T2-VT100--G,T2-SF100C--C,T2-AP100C--G
COFFEE TABLE WITH 2 DRAWERS
Reminders :
Two people are needed for assembly.
Use only hardware supplied.
Do not over tighten bolts.
This item may require periodic tightening.
MADE IN MALAYSIA
Page 2 of 2
HARDWARE PART :
Wrench
Flat Washer
Lock Washer
1 pc
8 pcs 4 pcs
Hex Bolt
8 pcs 8 pcs
Pan Head Screw
ASSEMBLY :
STEP 1
Pull out the Drawer Box as shown and Turn the Table Top upside down on a protective surface such as carpet or other soft material.
Use Flat Washer, Lock Washer, Hex Bolt and Wrench, to attach three legs randomly to the table top, do not fully tighten yet.
STEP 2
Insert the Fixed Shelf to three legs, insert the last leg to the corner of apron frame and Fixed Shelf.Then tighten with
Flat Washer,Lock Washer and Hex Bolt using the Wrench provided.And fix the Fixed Shelf by insert and tighten the
Pan Head Screw using the screw-driver (Not provided).
STEP 3
Check its balance and tighten all bolts to complete the assembly.
Lock Washer
Hex Bolt
Wrench
Flat Washer
CARE INSTRUCTION
~ Be sure to use the same type of polish consistenly.
Your furniture will appear cloudy or streaky if oil
based or wax based polishes are interchanged.
~ Spray your furniture surface evenly. Wipe in a
circular motion with a soft clean cloth.
IMPORTANT NOTE :
~ Please keep all hardware out of the reach of
children.