Winners Only DV24272 User manual

WINNERS ONLY®
ASSEMBLY INSTRUCTIONS
PROD. NO: DV24272
Thank you for purchasing this quality product. Be sure to check all packaging materials carefully for small parts that may have come loose
inside the carton during shipment.
IMPORTANT NOTE:
-Please keep all hardware parts
out of the reach of children.
-Two or more people are needed
for assembly.
STEP 1
Place Table Top (A) upside down on a soft protective surface such as a carpet. Align & fasten Mounting Block (D) to Table Top (A)
using Short JCBC bolt with small washers (2) and fully tighten with Allen Key (6).
STEP 2
Align & fasten Mounting Plate (C) to Mounting Block (D) using Short JCBC bolt with large washers (1) and fully tighten with
Allen Key (6).
1 OF 2
Soft Protective Surface
D
2
6
A
6
1
C
MADE IN MALAYSIA
COMPONENTS LIST DK24272T
C
D
E
1 PC
2 PCS
2 PCS
Mounting Plate
Mounting Block
Wood Stretcher
1 PC
ATable Top
NO. DESCRIPTION SKETCH QTY
COMPONENTS LIST DK24272B
B2 PCS
Table Leg Frame
NO. DESCRIPTION SKETCH QTY
F1 PC Hardware Bag
CAUTION : Please read instructions thoroughly before unpacking assembly parts. Sharp, exposed staple tips can cause injury, therefore, for your
protection, please remove any exposed staples used in packing.
1.We recommend that you should assemble this product with assistance of another person, this will make assembly easier, and will help to eliminate
damage to the product or injury to persons during assembly.
2.Be sure to check all packing material carefully for small parts that may be come loose inside the carton during shipment.
3.Please do not over tighten screws or bolts.
4.Please put all the parts on a non- abrasive floor before assembly and follow the assembly steps to assemble your newly purchased product correctly
and efficiently.
Reminders :
1. Use only the hardware supplied.
2. This item may require periodic tightening.
3
6
4
5
7
8
HARDWARE LIST
2
QTYSKETCHDESCRIPTIONNO.
1
SIZE
Wrench
Hex Nut
Allen Key
Spring Washer
Flat Washer
Long JCBC BOLT with
large washers
Short JCBC BOLT with
small washers
Short JCBC BOLT with
large washers M6X35mm
M6X40mm
M6X60mm
Ø
ØØ
Ø13mm
Ø
ØØ
Ø18mm
Ø
ØØ
Ø13mm
1 PC
2 PCS
1 PC
2 PCS
2 PCS
2 PCS
4 PCS
14 PCS
G Levelers 4 PCS

STEP 3
Align & fasten Table Leg Frame (B) to Table Top (A) using Short JCBC bolt with large washers (1) and fully tighten with
Allen Key (6).
STEP 4
Attach Wood Stretcher (E) to Mounting Plate (C) using Flat Washer (4), Spring Washer (5), Hex Nut (7) and fully tighten with
Wrench (8).
Attach Wood Stretcher (E) to Table Leg Frame (B) using Long JCBC Bolt with large washers (3) and fully tighten with
Allen Key (6).
STEP 5
Turn the table to upright position.
Assembly is now complete.
Thank you for purchasing this product.
ASSEMBLY INSTRUCTIONS
2 OF 2
B
B
1
6
E
4
5
7
8
3
6
CARE INSTRUCTION
~ Be sure to use the same type of polish consistenly.
Your furniture will appear cloudy or streaky if oil based or wax are interchanged.
~ Spray your furniture surface evenly. Wipe in a circular motion with a soft clean cloth.
PROD. NO: DV24272
®
WINNERS ONLY