Winners Only T1-SF4257 User manual

SOLID BUTTERFLY PEDESTAL TABLE
PART NO FIGURE DESCRIPTION Q'TY
Table Top
Leg
PARTS LIST
4 Pcs
1 Pc
1 Pc
Hardware Bag
DS 4257-13
Pedestal 1 Pc DS 4257-08
DS 4257-13
DS 4257-08
DS 4257-07
Apron Hinge 4 Pcs DS 4257-02
Leaf Hinge 3 Pcs DS 4257-09
Glides 2 Pcs DS 4257-05
Support Leaf 2 Pcs DS 4257-17
Mounting Plate 1 Pc DS 4257-18
Side Mounting Plate 2 Pcs DS 4257-19
Hook Lock 4 Pcs DS 4257-10
Support Leaf Hinge 2 Pcs DS 4257-12
Apron Leaf 2 Pcs DS 4257-20
DS 4257-07
DS 4257-20
DS 4257-01
TBSR-10355BC-CNNN MADE IN MALAYSIA
PAGE 1 OF 3
T1-SF4257

TBSR-10355BC-CNNN MADE IN MALAYSIA
PAGE 2 OF 3
STEP 2
NOTE : THE UNIT SHOULD BE ASSEMBLED BY 2 OR MORE PEOPLE.
ASSEMBLY
STEP 1
Remove Wood Strip
Mounting Plate
Side Panel
Hex Nut
Hex Nut
12 pcs Lock Washer
Lock Washer (Large)
(Large)
12 pcs Flat Washer
Flat Washer (Large)
Lock Washer (Small)
Flat Washer (Small)
Pedestal
Leg
Level Glide
(Large)
12 pcs Lock Washer
(Small)
8 pcs Flat Washer
(Small)
8 pcs
Wrench
Wrench
1 pce Allen Key
Allen Key
1 pce
JCBC Bolt
JCBC Bolt
Lock Washer (Small)
Lock Washer (Large)
Flat Washer (Small)
Flat Washer (Large)
Allen Key
Wrench
JCBC Bolt
Hex Nut
8 pcs
HARDWARE PART :
Turn the pedestal upside down. Attach legs by inserting
hanger bolts through pre-drilled holes on pedestal.
Put a Flat Washers (Large), Lock Washers (Large) and
Hex Nut onto the hanger bolts then tighten with the
provided Wrench.
STEP 3
Unlock Hook
CARE INSTRUCTION
~ Be sure to use the same type of polish consistenly.
Your furniture will appear cloudy or streaky if oil
based or wax based polishes are interchanged.
~ Spray your furniture surface evenly. Wipe in a
circular motion with a soft clean cloth.
IMPORTANT NOTE :
~ Please keep all hardware out of the reach of
children.
Position the table top upside down on a smooth, protective
surface such as carpet. Remove and discard the temporary
Wood Strip. Install the side panel and secure with
Flat Washers (Small), Lock Washers (Small) and
JCBC Bolt. Attach Mounting Plate as shown. Secure
with Flat Washers (Small), Lock Washers (Small) and
JCBC Bolt, then tighten all JCBC Bolts with Allen Key
provided.
Unlock the hooks underneath the table and pull the table top wide
open equally from both ends. Align and attach the table top to the
pedestal. Insert a Flat Washers (Large), Lock Washers (Large)
and Hex Nuts onto the hanger bolts. Tighten all Hex Nuts with the
provided Wrench.
SOLID BUTTERFLY PEDESTAL TABLE
T1-SF4257

Flip up apron
TBSR-10355BC-CNNN MADE IN MALAYSIA
PAGE 3 OF 3
STEP 4
Lift both leaves from the compartment and flip up the aprons then unfold table leaf and place the leaf on the top surface carefully.
Flip down apron
STEP 5
Push table top from both ends to close gap and lock the hooks underneath the table. Adjust the level glides until the table sits firmly.
TO STORE THE CENTRE LEAF WHEN NOT IN USE
Unlock the hooks underneath the table and pull the table top wide open equally from both ends. Flip down the aprons and fold the
centre leaf to store within the compartment. Push table top from both ends to close. Lock the hooks underneath the table.
Lock Hook
Unlock Hook Lock Hook
Level Glide
SOLID BUTTERFLY PEDESTAL TABLE
T1-SF4257