Winton WLR Series User manual

WINTON LANDSCAPE RAKE
WLR SERIES
OWNERS MANUAL
PLEASE READ THIS MANUAL BEFORE OPERATING THE MACHINE

Congratulaons on purchasing your new Winton machine!
Before you get started, we have provided a helpful space to jot down a few important
details about your new Winton machine.
Model Number: WLR
Serial Number:
Date of purchase:
Factory Reference: 5LRH, 6LRH
This manual should be considered a permanent part of this machine and should remain with it even if
the machine is subsequently sold.
Winton connually seeks advancements in its product design and quality. Therefore, while this manual
contains the most current product informaon available at the me of prinng, there may be minor
discrepancies between your machine and this manual.
If you have any quesons concerning this manual, please consult your local dealer.
First Published: March 2021

V1 1Winton WLR
General Safety Informaon
Ensure all potenal operators read this manual thoroughly before using the machine.
Safety: Ensure tractor and machine is stopped & keys out of ignion before set-up/maintenance.
Safety: Failure to follow good safety standards could result in severe injury or even death.
Misuse: This machine is designed for use with compact tractors, and should be used only for the
indicated purpose. Winton does not take responsibility if the machine is used for any other
purpose. Children must not operate the machine under any circumstance.
Modicaon: Do not modify equipment in any way. This may impair the operaon and overall
safety of the machine.
Tractor requirements: Use only with compact tractors within power range specied.
Misuse transport: Do not use machinery to transport personnel or livestock.
Condion: For the safety of personnel and opmum performance of the machine, you should
check the condion of the machine and the tractor before starng. Before use check all nuts and
bolts are ght.
Spaal awareness: Always check the operang area is safe before starng machinery.
Operator clothing: The operator should not wear loose clothing while operang machinery.
Safety wear: Always use appropriate ear protecon when running a tractor and machinery.
Ensure you are wearing protecve gloves when servicing and using machinery.
Bystander safety: Ensure bystanders keep away from the machine when it is in use. Do not
touch moving parts when the machine is at work.
Public places: When travelling on the road/public places, always keep the PTO turned o.
Maintenance: Always keep the machine maintained and in a good state. Where necessary,
repair or replace any defecve parts. Do not modify the machine.
Sharp objects: Pay aenon to the sharp/pointed parts while servicing the machine.
Safety guards: All protecve parts should be in good condion before operang machinery.
Safety signs/sckers: Keep all safety signs clean and legible. Replace any which are missing or
illegible. If a component with safety sign/(s) is replaced, make sure new safety sign/(s) are
aached in the same locaons.
Operang speeds: Machinery and PTO should be operated at the recommended speed at all
mes.
Safety awareness: Good safety requires that you familiarise yourself with various safety signs,
the type of warning and the area, or parcular funcon related to that area.
Alertness: Never consume alcohol or drugs these can hinder alertness/coordinaon. Consult
your doctor about using this machine while taking prescripon medicaons.

V1 2Winton WLR
General Safety Informaon (connued)
Machinery Pre-Use Checks
On receipt of your new Winton machine and again within the rst 4 hours of use, or the ‘shake
in’ period as we like to call it, we always recommend checking over the machine.
• Check all bolts, nuts and screws are ght on the unit.
• Tighten/check any bolts and nuts securing blades.
• If your machine has belts check the tension and adjust if required.
• Apply grease to grease points if necessary.
• Remove support/storage stands before operang machinery.
• Check oil levels and top up if needed.
Tractor Pre-Use Checks
Check that the machine is properly aached to the tractor. Ensure that secure pins are used on
the linkage mounng pins.
Be sure to add extra weights to the front of the tractor or add wheel weights if required.
Install and secure all safety guards, doors and covers before starng.
Bystanders should leave the immediate area before connecng the drive from the tractor.
Running/Operang Checks
• Always keep the PTO output from the tractor at 540 RPM when running machinery.
• Never use machinery at excessive speeds.
Post-Use Regular Checks
Check blades, belts and wearing parts. Be sure they are not damaged and blades swing freely in
their mount. Repair or replace as required.
Clean machinery and check for/clear any entangled material which may have got stuck around
any rotang parts.

V1 3Winton WLR
Contents
Pg.
General Safety informaon 1-2
1. Dimensions and Specicaons 3
2. Installaon & Set Up 4
3. Parts Diagram 6
4. Parts List 7
5. Winton Product Warranty 8
1. DIMENSIONS & SPECIFICATIONS
*All specicaons are subject to change without noce.
Model WLR5 WLR6
Weight 126kg 185kg
Recommended Tractor HP 20-45hp 25-55hp
Working Width 150cm 180cm
Linkage Size Category 1 Category 1

V1 4Winton WLR
2. INSTALLATION & SET UP
Safety: Ensure tractor and machine is stopped & keys out of ignion before set-up/maintenance.
Safety: Before aaching/detaching machinery ensure the hydraulic li system is in a neutral posion.
You will need:
Your tractor, tractor top link arm (adjustable), linkage pins & some elbow grease!
Aaching The Machine
Start by nding a at piece of ground. Lower the three point linkage on your tractor to its lowest
posion and aach the machine to the tractor using the three point linkage pins and linch pins.
Pre-Use Checklist
Before starng the machine, always check and adjust the following:
• Tightness of all bolts, nuts and screws.
• All protecve guards are in place before operang.

V1 5Winton WLR

V1 6Winton WLR
3. PARTS DIAGRAM
1
2
3
4
5678
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
(12)
(11)
(10)

V1 7Winton WLR
4. PARTS LIST
Dia No. Part Number Part Descripon Qty
16LR.00.101 Rake ne 36 (6)
5LR.00.101 Rake ne 30 (5)
26LR.00.102 Cover plate 6 (6)
5LR.00.102 Cover plate 5 (5)
36LRH.00.010 Tine bar weldment (6) 1
5LRH.00.010 Tine bar weldment (5) 1
46GBH.00.020 Mount frame weldment 1
56GBH.00.102 Side bar 2
6GB6170- M22x1.5 Nut M22x1.5 2
7GB93-22 Lock washer 22 2
86GB.00.104 Hitch pin 2
96GBH.00.101 Brace 1
10 GB6170- M16 Nut M16 2
11 GB93-16 Lock washer 16 2
12 GB97.1-16 Plain washer 16 2
13 6GB.00.106 Steel collar 2
14 GB5782- M16x100 Bolt M16x100 1
15 GB5783- M16x50 Bolt M16x50 1
16 6GB.00.105 Pin 1
17 6GB.00.107 Hitch pin 1
18 6GBH.00.030 Nut M36 1
19 GB93-36 Lock washer 36 1
20 GB97.1-36 Plain washer 36 1
21 GB5783- M10x30 Bolt M10x30 36 (6)
30 (5)
22 GB93-10 Lock washer 10 36 (6)
30 (5)
23 GB97.1-10 Plain washer 10 36 (6)
30 (5)
24 GB6170- M10 Nut M10 36 (6)
30 (5)

V1 8Winton WLR
5. WINTON PRODUCT WARRANTY
We always strive to create great products, but when something does go wrong we have a strong
network of resellers on hand throughout the UK to help out.
Warranty Claims
Before you get in touch here are 5 pieces of informaon your Winton reseller will need to progress
your claim:
• Your invoice/order details - to include date of purchase
• Machine model number
• Machine serial number
• Details of the fault
• Images/videos of the fault
The Terms & Condions
All products purchased as new are covered under our 12 month warranty from the date of
purchase. During this period Winton will repair or replace defecve parts free of charge. This
warranty is given on the proviso that the product has been used and maintained according to the
Owner’s Manual.
Warranty is carried out on a return to reseller / manufacturer basis and excludes any labour or
delivery / collecon costs.
Exclusions
• Wearing parts are excluded; including but not limited to blades, belts and bearings.
• Modicaon of the product in any way will cease the manufacturers warranty.
• The machine is warranted for one year to the original purchaser, resale within the period
will cease the warranty.
• Damage in transit is not covered. Claims will need to be made through the courier or your
Winton reseller directly.
• Compensaon for down-me, labour or loss of earnings is not covered by the warranty.
• No warranty extension will be granted for replacement parts ed.
• Damage caused by connued use of a faulty machine will not be covered.
Your Winton reseller will provide their own terms and condions upon purchase, consult this for
any addional queries.

V1 9Winton WLR

www.wintonmachinery.co.uk