Wirquin 20900501 User manual

HINGE FITTING INSTRUCTIONS 271030
B_06/2021
Top fit adjustable stainless steel hinge
1
2
BEFORE INSTALLING YOUR WIRQUIN TOILET SEAT
•Verify the colour and size.
•Check that the visual surface is free from cracks and surface defects.
•Ensure that all components are present and in a satisfactory condition.
•No claims will be entertained after installation.
ONLY SUPPLIED WITH SELECTED COMPATIBLE SEATS. Ignore this step if not included.
3 4
 holds the seat in place!
STOP SEAT
MOVEMENT
A : INSTALLATION OF FIXATION TO PAN

HINGE FITTING INSTRUCTIONS 271030
B_06/2021
Top fit adjustable stainless steel hinge
www.wirquin.co.za
WIRQUIN Manufacturing | 1 Hospital Road - Somerset East | Eastern Cape - 5850
T: [phone] | Email: [email protected].za
CARE AND CLEANING INSTRUCTIONS
•The seat and cover should be cleaned using warm soapy water.
•Do NOT use aggressive or abrasive cleaners as this may scratch the surface.
•The hinges should be cleaned using soap or mild detergent.
•After cleaning, the hinges should be rinsed in clean water and dried.
•NEVER use bleach, concentrated cleaners or acids as this will cause discolouring and pitting.
•Do not leave bleach in the toilet bowl with the cover closed because it may cause discolouration of the seat and hinges.
•The cover of the toilet seat is for decorative purposes only. The lid is not guaranteed to carry weight.
(Do NOT stand or sit on the cover.)
•Place hinge covers on and lower seat into position.
•Slide hinges into position.
•Adjust seat to correct position - left & right plus front to
back. When the ideal position for the seat has been found,
lift seat vertically and fix in place by tightening the nuts on
the top of the pan.
•Rotate hinge covers into position.
5
B : INSTALLATION OF THE SEAT
•Please ensure that the seat is secure before use.
6
7 8