Wirquin EMERALD User manual

HINGE FITTING INSTRUCTIONS
BOTTOM FIX
1,35kg
EMERALD Thermoplastic seat
385mm
adjustable 398/415/432mm
adjustable
156-192mm
280mm
230mm
www.wirquin.co.za
270815
A_07/2021
BEFORE INSTALLING YOUR WIRQUIN TOILET SEAT
•Verify the colour and size.
•Check that the visual surface is free from cracks and surface defects.
•Ensure that all components are present and in a satisfactory condition.
•No claims will be entertained after installation.
ONLY SUPPLIED WITH SELECTED COMPATIBLE SEATS. Ignore this step if not included.
 holds the seat in place!
STOP SEAT
MOVEMENT
CARE AND CLEANING INSTRUCTIONS
•The seat and cover should be cleaned using warm soapy water.
•Do NOT use aggressive or abrasive cleaners as this may scratch the surface.
•The hinges should be cleaned using soap or mild detergent.
•After cleaning, the hinges should be rinsed in clean water and dried.
•NEVER use bleach, concentrated cleaners or acids as this will cause discolouring and pitting.
•Do not leave bleach in the toilet bowl with the cover closed because it may cause discolouration of the seat and hinges.
•The cover of the toilet seat is for decorative purposes only. The lid is not guaranteed to carry weight.
(Do NOT stand or sit on the cover.)

HINGE FITTING INSTRUCTIONS
EMERALD Thermoplastic seat
1
1 2
IMPORTANT!
NOTE HINGE
PIN POSITION!
1 2
IMPORTANT!
NOTE HINGE
PIN POSITION!
1 2
IMPORTANT!
NOTE HINGE
PIN POSITION!
1 2
IMPORTANT!
NOTE HINGE
PIN POSITION!
2 3
•1. Fit the LOCK+ into the holes in the pan. (Ignore this step if not included)
•2. Place the plastic bolt (D) in one of the slots in the hinge body (B).
•3. Slide the gasket (C) into the hinge body (B). Push the hinges into the holes in the seat lugs (NOTE: the pins on the
hinge must go on the inside, pointing outward) fit the seat by placing the bolts through the holes in the toilet pan.
A : INSTALLATION of FIXATION TO PAN
•The seat overhang at the front of the pan can be adjusted.
•1) Move the plastic bolts into the alternative slot in the gasket and
hinge body. This allows two possible seat positions.
•The seat can be adjusted sideways to ensure that it is centred.
•The hinge body may be turned around, with the hinge post offset
to the front or the back of the seat, to allow for a 3rd adjustment
option.
1 2
IMPORTANT!
NOTE HINGE
PIN POSITION!
1 2
IMPORTANT!
NOTE HINGE
PIN POSITION!
•When the ideal position for the
seat has been found, fix in place by
adding the nuts on the underside of
the pan. Please ensure that the seat
is secure before use. Failing to do so
could damage or break the hinges.
B : INSTALLATION of the SEAT
4 5
www.wirquin.co.za
WIRQUIN Manufacturing | 1 Hospital Road - Somerset East | Eastern Cape - 5850
T: [phone] | Email: [email protected]
ONLY SUPPLIED WITH
SELECTED COMPATIBLE
SEATS. Ignore this step if not
included.