Wolf E Series DO30-2F/S User manual

E Series Built-In Double Ovens
Model DO30-2U/S shown.
Model DO30-2F/S
Framed Door Style
Wolf E Series built-in ovens come with
the classic stainless steel finish and are
offered in two different door styles—
framed and unframed. The E Series
built-in design allows the front of the
oven to be installed flush with surround-
ing cabinetry for a more integrated look
or used in the standard application,
where the oven trim will overlap the
cabinet face. With the dual convection
fans, E Series ovens offer ten different
cooking modes.
Accessories
Bake stone accessory, includes stone,
rack and peel
Two-piece broiler pan and temperature
probe
Set of three oven racks
Dehydration racks with door stop
Accessories are available through your
Wolf dealer. To obtain local dealer information,
visit the Showroom Locator section of our
website, wolfappliance.com.
This appliance is certified by Star-K to
meet strict religious regulations in
conjunction with specific instructions
found on www.star-k.org.
Model Options DO30-2F/S DO30-2U/S
Door Style Framed Unframed
Model DO30-2U/S
Unframed Door Style
Touch Control Panel (single oven shown)
Features
Framed and unframed door styles in
classic stainless steel finish
Dual convection logic control system—
lower oven is non-convection
Ten cooking modes in upper oven—bake,
roast, broil, convection bake, convection
roast, convection broil, convection, bake
stone (accessory required), dehydrate
(accessory required) and proof
Four cooking modes in lower oven—bake,
roast, broil and proof
Touch control panel with LCD display
Cobalt blue porcelain oven interiors
Three removable racks with full-extension
bottom rack and removable six-level rack
guide in each oven
Large viewing double-pane windows
Dual interior halogen lighting
Hidden bake element and recessed broil
element in each oven
Temperature probe and receptacle in
each oven
Self-clean, delayed start and Sabbath
features in each oven
Balanced door hinges assure smooth
opening and closing of the doors

E Series Built-In Double Ovens
Installation Notes
Wolf E Series built-in ovens may be used in
a standard installation, where the face trim
overlaps stiles and rails, or in a flush inset
installation with the front of the oven flush
with surrounding cabinetry.
Complete installation specifications can be
found on our website, wolfappliance.com.
Unit dimensions may vary by ±
1
/ 8 ".
5"
(127) E
281/2" (724)
OPENING WIDTH
4"
(102)
E
E
E
33" (838)
RECOMMENDED CABINET WIDTH
30"min (762)
495/8"
(1260)
OPENING
HEIGHT
24"min (610)
OPENING DEPTH
67"typical
(1702)
ELECTRICAL LOCATION
WITHIN OPENING
APPLIES ONLY TO
CABINETS DEEPER
THAN 24" (610)
Specifications
Overall Width 297/8"
Overall Height 503/8"
Overall Depth 233/4"
Oven Door Clearance 22"
Oven Interior Capacity
(per oven) 4.5 cu ft
Oven Interior Dimensions
(per oven) 25" W x 161/2" H x 19" D
Recommended Cabinet Width Standard 30"
Flush Inset 33"
Minimum Cabinet Depth Standard 24"
Flush Inset 25"
Minimum Base Support 400 lbs
Opening Width 281/2"
Min Inset Width 303/8"
Opening Height 495/8"
Min Inset Height 5015/16"
Electrical Requirements 240/208 V AC
60 Hz, 50 amp circuit
Electrical Rating 8.9 kW at 240 V
6.7 kW at 208 V
Shipping Weight 466 lbs
Installation
Specifications
Standard Installation
Overall Dimensions
IMPORTANT NOTE: Unless you are using cabinets
deeper than 24" (610) for a standard installation or
25" (635) for a flush inset installation, it is recom-
mended that the electrical supply be placed in an
adjacent cabinet within reach of the conduit.
Choose the location shown in the illustrations that
best suits your installation.
233/4" (603)
BEHIND FRAME
503/8"
(1280)
491/2"
(1257)
281/4"
(718)
297/8"
(759)
233/4"
(603)
OPEN OVEN DOOR
TOP VIEW
25/8"
(67)
22"
(559)
11/4"
(32)
1" (25)
17/8"
(48)
17/8"
(48)
RIGHT SIDE VIEW
297/8"
(759)
INSTALLER
SUPPLIED CABLE
CHANNEL
495/8"
(1260)
OPENING
HEIGHT
5015/16"
min (1294)
FLUSH
INSET
HEIGHT
303/8"min (772)
FLUSH INSET WIDTH
281/2" (724)
OPENING WIDTH
5"
(127)
4"
(102)
EE
E
E
36" (914)
RECOMMENDED CABINET WIDTH
33"min (838)
24"min
(610)
OPENING
DEPTH
1" (25)
25"min
(635)
FLUSH
INSET
DEPTH
7/16" (11)
7/8" (22)
ELECTRICAL LOCATION
WITHIN OPENING
APPLIES ONLY TO
CABINETS DEEPER
THAN 25" (635)
67"typical
(1702)
SIDE VIEW
TOP VIEW
Flush Inset
Installation
Dimensions in
parentheses are in
millimeters unless
otherwise specified.