Wolf E Series SO30-2F/S User manual

E Series Built-In Single Ovens
Model SO30-2U/S shown with
Model WWD30 warming drawer with E Series trim.
Model SO30-2F/S
Framed Door Style
Wolf E Series built-in ovens come with
the classic stainless steel finish and are
offered in two different door styles—
framed and unframed. The E Series
built-in design allows the front of the
oven to be installed flush with surround-
ing cabinetry for a more integrated look
or used in the standard application,
where the oven trim will overlap the
cabinet face. With the dual convection
fans, E Series ovens offer ten different
cooking modes.
Accessories
Bake stone accessory, includes stone,
rack and peel
Two-piece broiler pan and temperature
probe
Set of three oven racks
Dehydration racks with door stop
Accessories are available through your
Wolf dealer. To obtain local dealer information,
visit the Showroom Locator section of our
website, wolfappliance.com.
Touch Control Panel
Features
Framed and unframed door styles in
classic stainless steel finish
Dual convection logic control system
Ten cooking modes—bake, roast, broil,
convection bake, convection roast,
convection broil, convection, bake stone
(accessory required), dehydrate (acces-
sory required) and proof
Touch control panel with LCD display
Cobalt blue porcelain oven interior
Three removable racks with full-extension
bottom rack and removable six-level rack
guide
Large viewing double-pane window
Dual interior halogen lighting
Hidden bake element and recessed broil
Temperature probe and receptacle
Self-clean, delayed start and Sabbath
features
Balanced door hinges assure smooth
opening and closing of the door
This appliance is certified by Star-K to
meet strict religious regulations in
conjunction with specific instructions
found on www.star-k.org.
Model Options SO30-2F/S SO30-2U/S
Door Style Framed Unframed
Model SO30-2U/S
Unframed Door Style

E Series Built-In Single Oven
Installation Notes
Wolf E Series built-in ovens may be used in
a standard installation, where the face trim
overlaps stiles and rails, or in a flush inset
installation with the front of the oven flush
with surrounding cabinetry.
Complete installation specifications can be
found on our website, wolfappliance.com.
Unit dimensions may vary by ±
1
/ 8 ".
273/16"
(691)
OPENING
HEIGHT
281/2" (724)
OPENING WIDTH
5"
(127)
4"
(102)
24"min (610)
OPENING DEPTH
E E
E
E
33" (838)
RECOMMENDED CABINET WIDTH
30"min (762)
ELECTRICAL LOCATION
WITHIN OPENING
APPLIES ONLY TO
CABINETS DEEPER
THAN 24" (610)
Specifications
Overall Width 297/8"
Overall Height 277/8"
Overall Depth 233/4"
Oven Door Clearance 22"
Oven Interior Capacity 4.5 cu ft
Oven Interior Dimensions
25" W x 161/2" H x 19" D
Recommended Cabinet Width Standard 30"
Flush Inset 33"
Minimum Cabinet Depth Standard 24"
Flush Inset 25"
Minimum Base Support 250 lbs
Opening Width 281/2"
Min Inset Width 303/8"
Opening Height 273/16"
Min Inset Height 281/2"
Electrical Requirements 240/208 V AC
60 Hz, 30 amp circuit
Electrical Rating 5.1 kW at 240 V
3.8 kW at 208 V
Shipping Weight 273 lbs
Installation
Specifications
Standard Installation
Overall Dimensions
IMPORTANT NOTE: Unless you are using cabinets
deeper than 24" (610) for a standard installation or
25" (635) for a flush inset installation, it is recom-
mended that the electrical supply be placed in an
adjacent cabinet within reach of the conduit.
Choose the location shown in the illustrations that
best suits your installation.
233/4" (603)
BEHIND FRAME
277/8"
(708)
281/4"
(718)
297/8"
(759)
233/4"
(603)
INSTALLER
SUPPLIED CABLE
CHANNEL
OPEN OVEN DOOR
TOP VIEW
22"
(559)
11/4"
(32)
1" (25)
17/8"
(48)
17/8"
(48)
RIGHT SIDE VIEW
271/16"
(687)
297/8"
(759)
25/8"
(67)
273/16"
(691)
OPENING
HEIGHT
281/2"min
(724)
FLUSH
INSET
HEIGHT
303/8"min (772)
FLUSH INSET WIDTH
281/2" (724)
OPENING WIDTH
5"
(127)
4"
(102)
EE
E
E
36" (914)
RECOMMENDED CABINET WIDTH
33"min (838)
24"min
(610)
OPENING
DEPTH
1" (25)
25"min
(635)
FLUSH
INSET
DEPTH
7/16" (11)
7/8" (22)
ELECTRICAL LOCATION
WITHIN OPENING
APPLIES ONLY TO
CABINETS DEEPER
THAN 25" (635)
SIDE VIEW
TOP VIEW
Flush Inset
Installation
Dimensions in
parentheses are in
millimeters unless
otherwise specified.