WONDERFOLD WAGON W2S 2.0 Installation instructions
Assembly & Safety Instructions
W2S 2.0
Please keep this booklet in a safe place for the life of your WonderFold stroller.
www.WonderFoldWagon.com
www.WonderFoldWagon.com
2 3
ENEN
WARNING
Important—Keep these instructions for future reference.
Avoid Serious Injury To Children From Falling Or Sliding Out:
• ALWAYS use the included harnesses to secure each child.
• Never leave children unattended.
• Always set parking brake while loading and unloading children.
• This stroller unit is not intended for children under 6 months of age.
Avoid Serious Injury To Children:
• Use caution when using stroller near traffic or in highly congested areas.
• DO NOT use stroller on stairs or escalators.
• Keep children clear when unfolding and folding the stroller.
• DO NOT let your child play with this product.
• DO NOT use the stroller while running, jogging or skating. The stroller is intended
only for up to a brisk walking speed.
Avoid Injury From Stroller Tipping Over:
• DO NOT allow more than 2 children in the stroller at any given time.
• DO NOT exceed the per seat limit of 45 lbs.
• The stroller is not intended to carry children taller than 40 inches.
• DO NOT allow children to climb into stroller unassisted, or to play or hang onto
stroller.
• DO NOT overload the stroller as it may cause instability and/or damage to the
product.
• Only manufacturer approved parts and accessories should be placed on the
stroller. Non-compliant parts or accessories, such as hanging items or bags, may
cause instability.
• DO NOT place more than 11 lbs. (5 kg) in each storage basket.
• DO NOT place more than 1.1 lbs. (0.5 kg) in each storage pocket.
• ALWAYS distribute weight in the stroller as evenly as possible.
Avoid Loss Of Control Of Stroller:
• ALWAYS ensure that all locking clips, clamps and buckles are engaged and all
accessories are securely fastened before use.
• NEVER leave stroller unattended on a hill or incline even when parking brake
is set.
• ALWAYS use caution when the stroller is on uneven terrain or slopes.
• ALWAYS set parking brake when the stroller is stationary.
Avoid Pinch Injury:
• Keep fingers clear of hinged joints when folding and unfolding the stroller.
• ALWAYS keep children clear from moving parts when making adjustments to the
stroller.
See Assembly, Operation and Maintenance & Care sections for additional
warnings and usage instructions.
Parts Check List.........................................................................................................................................3
Assembly
Unfolding the Stroller/Assembly of Front Wheels/Assembly of Rear Wheels......................4
Assembly of Rear Wheels/Canopy Assembly/Basket Assembly...............................................5
Handle Strap Assembly/Seat Assembly.............................................................................................6
Operation
Securing the Harness/Parking Brake Operation/Adjustable Handle.......................................7
Folding the Stroller/Canopy Storage..................................................................................................8
Operation of the Privacy/Wind Curtains/Canopy Height Adjustment....................................9
Maintenance & Care
Assembly of Baseboard/Cleaning/Replacement Parts List......................................................10
If any parts are either missing or broken or need for immediate assistance in assembling
your stroller, please contact your local dealer or retailer.
Parts Check List
1. Stroller body
1 PC
4. Seat units
2 PCS
2.
Rear wheels assembly
2 PCS
5. Canopy
1 SET
9.
Stroller baseboard
1 PC
7. Brake set
1 PC
8. C-shaped clamp
2 PCS
(preinstalled on the brake bar)
3.
Front wheels assembly
2 PCS
6. Rear basket
1 PC
10. Handle strap
1 PC
(located in the front storage pocket)
4 5
ENEN
Unfolding the Stroller
1. Standing on either side of the stroller, push smoothly outward on the upper front
and rear frame tubes to unfold the stroller.
2. Ensure the upper lock on the right side of the stroller snaps into place.
3. Flip over the side pocket flaps to the outside on both sides of the stroller to cover
the frame joints.
Assembly & Removal of Front Wheels
1. Insert front wheels into the front wheel housings until you hear a click.
2. After attaching the front wheels, pull down on each wheel to confirm that they are
securely locked in place.
3. To unlock and release the wheel, use a tool with a narrow point to press the metal
button at the base of the stroller frame, then pull off the wheel.
Assembly Assembly of Rear Wheels
1. Line up and connect the rear wheel assembly to the rear tube joint.
2. Check that the clips are in place on both sides of the wheel housing.
Canopy Assembly
1.
Before assembling the canopy, make sure all four plastic clamps at the corners are open.
2.
Insert the canopy poles into the frame slots on all four corners at the desired height.
3. Clasp to close all four plastic clamps. Canopy assembly complete.
Basket Assembly
1. Slide the basket hooks into the fixed slots on the frames under the handle bar tube.
2. Gently wiggle the basket to level it. Completed assembly shown in diagram 2.
Assembly of Rear Wheels
1. The C-shaped clamp comes pre-installed on the brake assembly. Release the
C-shaped clamp by pushing it out from the brake unit.
2. Insert the wheel axle in the brake assembly.
3. Insert the C-shaped clamp back into the rear wheel housing.
4. Pull the rear wheel axle to ensure that the rear wheel assembly is secure.
6 7
ENEN
Handle Strap Assembly
1.
Locate the handle strap in the zippered front stroller
storage pocket.
2. Fix the handle strap onto the lower front frame tube.
3. Use as shown in diagram 3.
Operation
Securing the Harness
1. With harness unbuckled, place child in seat.
2. Secure child with harness by placing shoulder and waist belts over shoulders and
over thighs. Snap buckle tongues into center strap buckle.
3. Snugly adjust each strap by pulling on the free end of the strap and moving the
slide adjuster along strap.
Parking Brake Operation
1. Step down gently on the parking brake pedal to lock. To test and ensure the brake is
engaged, try to push the stroller forward.
2. Lift the parking brake pedal upwards with your foot to release it.
Waist Belts
Shoulder Belts
Center Strap
Handle Height Adjustment
1. Press the adjustable handle button on both sides simultaneously.
2. While the buttons are pressed, position the handle up or down to desired height.
Seat Assembly(Seat is not suitable for children under 6 months.)
1. Place the seat into one end of the stroller.
2. Secure the hooks on both sides of the seat onto the stroller frame hand rail. Then
secure the hooks on the back of the seat onto the upper tube of the stroller frame.
3. Completed seat assembly shown in diagram 3.
4. For reclining mode, remove the seat and reposition the side hooks further forward.
①
②
③
④
Seat Mode Reclining Mode
8 9
ENEN
Canopy Storage
1. Adjust the handle tube to the upright position.
2. Roll up the canopy fabric around the horizontal part of the canopy poles.
3. Insert the combined ends of the canopy poles into the small storage pockets on each
side of the basket.
4. Secure the poles using the straps on the rear leg tubes and snap the fasteners.
Folding the Stroller
1. Flip the side pockets into the stroller.
2. Stand in front of the stroller, gently release the upper lock on the right hand side.
3. Grasp the folding hinge on both sides.
4. Lift up on the folding hinges with both hands until the stroller is completely folded.
Keep fingers clear of hinges to avoid pinching.
5. Secure the lower latch to lock the stroller in the folding position.
Operation of the Privacy/Wind Curtains
1. Unzip the pocket located on the upper part of the inner carriage fabric.
2. Stretch out the inside curtain, and secure the bottom Velcro to the carriage fabric.
3. Repeat the same operations for the other side of the stroller.
4. To secure the curtain, pull up the Velcro, roll up the curtain and zip up the pocket.
Canopy Height Adjustment
1. Before adjusting the height of canopy, make sure all four plastic clamps at the
corners are open.
2. With one hand on each horizontal part of the canopy pole, gently slide the canopy
poles up/down to desired height. Take care not to bend the poles.
3. Secure all four plastic clamps to lock canopy height.
Release Clasp
10 11
ENEN
Replacement Parts List
1. Rear Wheel
Assembly
1 PC
6.
Stroller
Baseboard
1 PC
2. Front Wheel
Assembly
1 PC
7. Rear Basket
1 PC
3. Canopy
1 PC
8. Handle Strap
1 PC
9. C-Shaped Clamp
1 PC
10. Brake Set
1PC
4. Seat Unit
1 PC
5. Carriage
Fabric
1 PC
Cleaning the Stroller
1. Wash stroller frame with mild soap and warm water solution.
2. Rinse and wipe with a dry cloth until fully dry.
Cleaning the Seat Pad
1. Spot clean with mild soap and warm water solution.
2. Rinse and wipe with a dry cloth until fully dry.
Cleaning
One Year Limited Warranty
WonderFold warrants this product to be free from defects in material or workmanship
for a period of one year from the date of purchase when used by the original owner
according to the manufacturer's instructions.
The warranty does not apply to damage caused by product alteration, or customer/
user misuse or abuse of the product. Your sales receipt is your only record of the date
of purchase. Warranty is subject to change at any time at manufacturer's sole
discretion. Please refer to https://www.WonderFoldWagon.com/pages/warranty for
the most current version of the manufacturer warranty. Please contact WonderFold if
you have any warranty questions or if you need replacement parts:
WONDERFOLD
PO BOX 2144
Temple City, CA 91780
hello@WonderFoldWagon.com
1(888) 681-1526
Assembly of Baseboard
1. Place the baseboard into the base of the carriage fabric nestled against the frame.
2. Press the baseboard with your hands to level and secure it in place.
Table of contents
Other WONDERFOLD Stroller manuals
