World Market 597196 User manual

NEAREST WORLD MARKET STORE.
Page 1
NOT FOR COMMERCIAL USE.
NEVIS ROPE OCCASIONAL BENCH
SKU - 597196

2
Back Cushion
F1
Seat Cushion
A
B
C
D
E
Seat Frame
Front Leg
Back Leg
Center Leg
1
H-1
H-2
H-3
Long Allen Bolt (M6x45)mm
Spring Washer
Flat Washer (M6x1)mm
Allen Key
8
10
10
1
Page 2
2
2
1
H-4
T-1
Short Allen Bolt (M6x25)mm 2

Page 3
World Market store
or call our customer service call center at call 1-877-967-5362.

Page 4
H-1
H-2
H-3
Long Allen Bolt (M6x45)mm
Spring Washer
Flat Washer (M6x1)mm
Allen Key
x8
x8
x8
T-1 x1
Clockwise
B
B
C
A
C
H-1
H-2
H-3
T-1
Step 1
Prepare the assembly by placing Seat Frame (A), Front Leg (B) and Back Leg
down onto a
(
C),
padded, non-marring surface. Arrange the components as shown above.
Secure the Front Legs (B) and Back Legs (C) to Seat Frame (A) by using Long Allen Bolts (H-1),
Spring Washers (H-2) and Flat Washers (H-3), stacking the hardware in the order as shown.
Engage all bolts first, and then fully tighten them using Allen Key (T-1).
x2

Page 5
H-4
H-2
H-3
Short Allen Bolt (M6x25)mm
Spring Washer
Flat Washer (M6x1)mm
Allen Key
x2
x2
x2
T-1 x1
Clockwise
D
H-4
H-2
H-3
T-1
Step 2
Placing Center Leg (D) as shown.
Secure the Center Leg (D) to Seat Frame (A) by using Short Allen Bolts (H-4),
Spring Washers (H-2) and Flat Washers (H-3), stacking the hardware in the order as shown.
Engage all bolts first, and then fully tighten them using Allen Key (T-1).
x1

Page 6
Leverlers Feetcap.
Step 3
Turn the bench upright. Place Seat Cushion (F), Back Cushion (E) into position
Assembly is now complete and the bench is ready for use.
NOTE: Levelers can be used for additional adjustment (if needed).
Ensure all bolts are fully tightened every 3 months to ensure stability.
as shown. Ensure all bolts have been fully tightened.
F
E
E

CUSHION AND SLIP COVER CARE:
For minor spots wipe with a wet cloth and use a mild detergent. Do not use bleach.
Slip covers can also be placed in a washing machine.
Remove the slip cover from the insert, do not place insert in the washing machine.
Use gentle cycle, cold water and no bleach.
Line dry, do not place in the dryer.
We use a higher density foam to ensure the cushion does not break down in the outdoor elements.
Cushion will soften over time.
Flip the cushions to maintain the quality.
For best results remove cushions during cold or inclement weather and store in a dry area.
If cushions do become wet allow to completely dry before storing to prevent mold and mildew.
Page 7

Page 8