World Market ANTON 622517 User manual


ORLD
Assembly Instctions
ANTON CARVED DOOR DESK
SKU - 622517

 

 
  





ATop Panel 1
B Left Side L-Frame 1
C Right Side L-Frame 1
D Bottom Ply 1
E Front Side Leg 1
F Back Side Leg 1
G Top Leg Frame 1
H Frame Connector 1
I Drawer 1
JInner Shelf 1
19+1
23+1
23+1
Long
Short
Extra
Extra
Extra
Extra
Medium


-
L
ABEL DESCRIPTION QTY
@• Allen Key
T-1 (4mm)


Before Beginning:

















Y •

f2xT •

.
�-








A

Page 3

With assistance of a second person place the Top Panel (A) in upside down position on padded non-
marring surface. Place Right Side L-Frame (C) and ensure to match sticker (A1-A1) & aligned the
holes and dowel of Right Side L-Frame (C) with the holes of Top Panel (A) as illustrated. Now adjust
Top overhang from all sided then secure connection using Medium Allen Bolt (H-2), Lock Washer
(H-4) and Flat Washer (H-5) stacking hardware as shown. Do engage all hardware first then loosely
tighten using provided Allen Key (T-1). Do not yet fully tighten. Now slide the Left Side L-Frame (B)
onto the grooved as illustrated. Repeat the same step to assemble Left SideL-Frame (B). Now fully
tighten all hardware with Allen Key (T-1). Do not over tighten.
H-2
H-4
H-5
H-2
H-4
H-5
X2
Label
Label
Dowel
Dowel
Groove
A
C
B
A
PLEASE MAKE
NOTE OF THE
DIFFERENT BOLT
SIZES AND
ENSURE YOU
ARE USING THE
CORRECT SIZE
BOLT FOR EACH
STEP.
X2

H-5 H-4
provided Allen Key (T-1). Do not yet fully tighten.
Now secure both Side L-Frames (B & C) with Long Allen Bolt (H-1), Lock Washer (H-4) & Flat
Washer (H-5) stacking hardware as shown Do engage all hardware first then loosely tighten using

Now slide the Bottom Ply (D) on to the provided groove on bottom of Left Side L-Frame (B) and Right
Side L-Frame (C) as illustrated. Now align the holes of Bottom Ply (D) with the pre threaded hole on
frame & secure connection using Medium Allen Bolt (H-2), Lock Washer (H-4) and Flat Washer (H-5)
stacking hardware as shown & tighten it using Allen Key (T-1). Do not over tighten.
Now insert Front Side Leg (E) onto fixed metal pipe in bottom of box ensuring the holes of Front Side
Leg (E) is aligned with the pre drilled holes of metal pipe as illustrated. Secure connection using
Short Allen Bolt (H-3), Lock Washer (H-4) and Flat Washer (H-5) stacking hardware as shown.Do
engage all hardware first then loosely tighten using provided Allen Key (T-1). Do not yet fully tighten.
Repeat the same step to assemble Back Side Leg (F). Do not yet fully tighten.
STEP -3
STEP -4
D
B
A
E
F
H-4
H-5
H-5
H-4
H-3

Now Insert Frame Connecter (H) and Top Leg Frame (G) onto fixed Back Side Leg (F) ensuring the
holes of Frames Connecter (H) and Top Leg Frame (G) is aligned with the holes of Back Side Leg (F)
& Drawer Box as illustrated. Secure it with Medium Allen Bolt (H-2), Lock Washer (H-4) and Flat
Washer (H-5) stacking hardware as shown. Do engage all hardware first then loosely tighten using
provided Allen Key (T-1). Do not yet fully tighten. Repeat same step to assemble Back Side Leg (F)
stacking hardware as shown. Now fully tighten all hardware with Allen Key (T-1). Do not over tighten.
STEP -5
STEP -6
H
G
The backside of each cabinet door has a removable and reversible finish panel that can be
customized to change the desired look or function of each door pattern. To remove the finish panel,
toggle each of the black plastic toggle clips along the backside perimeter of each door as shown.
Carefully remove the finish panel and select the desired finish/color side, then reinstall it and flip the
toggle clips back down to secure the panel. For sound pass through or ventilation flow, the finish
panel can also be completely removed if desired.
F

With the assistance of second person carefully turn the product in upright position and ensure all
hardware tighten from step Now after all above steps 1 to 7. Now insert Drawer (I) and Inner Shelf (J)
as illustrated.
Levelers can be use for adjustment if needed.
Product is ready to use.
STEP -7
STEP -8
There is wooden stopper which used to lock the door by rotating it

Anti- Tip Kit
"Warning: Serious or fatal injuries can occur from furniture tip-over. To help prevent furniture tip-over.
- Use provided mounting hardware to secure furniture to the wall. This may reduce but not eliminate the risk of
furniture tip-over.
- Do not allow children to climb on furniture.
- Keep remote controls, toys, and other items that might attract children off of this product.
- Unless specifically designed to accommodate, do not set televisions or other heavy objects on top of this product."
Warning - Children may be injured by tipping of furniture and the use of the Anti-Tip Kit is highly recommended. This Anti-Tip
Kit is only a deterrent. It is not a substitute for proper adult supervision. Manufacturer and retailer assume no liability for
improper installation or excess loads placed on screws, brackets, or straps. When properly installed, this restraint provides
protection against unexpected tipping of furniture. This Anti-Tip Kit MUST be installed into the wall using proper mounting
hardware OR into a wall stud using appropriate screws. Position of the Anti-Tip Kit depends on the product and the location of
the wall studs. The hardware provided is not a comprehensive solution for all wall types. Be sure to consult a professional or
your local hardware store to determine the hardware needed for your specific wall type (plaster, drywall, concrete, etc.).
Using a second person to assist you, place the unit in the desired final location against a wall. It is suggested to use a stud
finder to find wall studs along the width of the unit and roughly 1 inch below the top of the unit. Where possible, mark a drill hole
position on the wall where there is a stud and use a drill or screwdriver (NOT INCLUDED) to attach wall Brackets (A) to the wall
using Long Screws (B) in the location of the wall studs.
In a case where there is no wall stud, hold Brackets (A) on wall and mark the drill hole positions so that they are roughly 1 inch
below the top of the piece. Using a drill with a drill bit roughly the diameter of the plastic Wall Plugs (E), drill pilot holes in
marked positions. Insert the plastic Wall Plugs (E) into the holes until the tops are roughly flush with the wall. Align the holes
and insert the Long Screws (B) through Brackets (A) and into the corresponding holes in the wall using a phillips head
screwdriver (NOT INCLUDED).
Next, attach remaining 2 Brackets (A) to the back of the piece using Short Screws (C) so they align with Brackets installed on
the wall. Loop Straps (D) through Brackets (A) on the furniture piece, then through Brackets (A) on the wall and tighten until
snug. Installation is now complete.
IMPORTANT: Check that the Wall Bracket is firmly screwed into the wall and the Cable Tie is snug. If there is any hesitation,
please consult a professional or your local hardware store.
Page 9
4
4
4 x Short Screw
4 Wall plug
2 x strap

Care & Maintenance

)))
- •
A •
L



 
• 

✓Q•
Page 10