World Market Caspian 608273 User manual

THANK YOU FOR PURCHASING OUR QUALITY PRODUCT. IF YOU HAVE
ANY QUESTIONS PERTAINING TO THE ASSEMBLY OF THIS FURNITURE
PIECE, PLEASE CONTACT YOUR NEAREST WORLD MARKET STORE, OR
CALL OUR TOLL FREE NUMBER 877-967-5362 FOR ASSISTANCE.
Caspian Dining Side Chair
R
Assembly Instructions
SKU - 608273
NOT FOR COMMERCIAL USE.
Page 1

Page 2
Back Frame
PICTURE QTY
DESCRIPTION
LABEL
A1
2
Front Leg
Seat frame 1
B
C
Part List

Page 3
LABEL DESCRIPTION Q.TY
PICTURE
4
Long Allen Bolt M6 x 80 mm
TAllen key 4 x 57 x 25 mm
H-1
Lock Washer Ø6 x 10.5 x T2 mm.
Flat Washer Ø6 x 16 x T2 mm.
Medium Allen Bolt M6 x 55 mm
Short Allen Bolt M6 x 40 mm
H-2
H-3
H-4
H-5
4
3
11
11
1
LABEL DESCRIPTION Q.TY
PICTURE
Hardware List
Tool List

Before Beginning:
Read instructions, cover to cover.
In case of missing parts, please contact your nearest World Market store or
our customer service call center 877-967-5362.
Assemble on a clean non-marring surface (packing foam).
Unpack all hardware bags and components to ensure you have all parts.
Have 2 adults on hand for assembly.
Do not assemble on flooring or carpet.
Save all packaging until finished.
Page 4
Assembly Preparation

Step 1
Step 2
(H-3) Short Allen Bolt x 3
(H-4) Lock Washer x 7
(H-5) Flat Washer x 7
(T) Allen Key x 1
(H-1) Long Allen Bolt x 4
Page 5
H-4
H-5
H-1
H-3
H-4
H-5
T
4x
3x
FRONT
TOP
T
H-2
H-4
4x
TOP
FRONT
H-5
T
(H-2) Medium Allen Bolt x 4
(H-4) Lock Washer x 4
(H-5) Flat Washer x 4
(T) Allen Key x 1
Assembly Steps
Place Back Frame (A) down onto a padded, non-marring surface as shown. Attach Seat Frame (B) to Back Frame (A)
at the seat corners using Long Allen Bolts (H-1), Lock Washers (H-4) and Flat Washers (H-5), stacking the hardware
in the order as shown. Engage all bolts first by hand, then fully tighten using Allen Key (T). Continue by securing the
middle of Seat Frame (B) to the Back Frame using Short Allen Bolts (H-3), Lock Washers (H-4) and Flat Washers
(H-5), stacking the hardware in the order as shown. Fully tighten using Allen key (T). Do not over tighten.
Place the assembled Backrest/Seat upside down on a padded, non-marring surface as shown. Secure Front Legs (C)
to the corners of Seat Frame (B) using Medium Allen Bolts (H-2), Lock Washers (H-4) and Flat Washers (H-5),
stacking the hardware in the order as shown. Engage all bolts first by hand, then fully tighten using Allen Key (T).
Do not over tighten.

Page 6
Assembly is now complete and the chair is ready for use.
NOTE: Levelers can be adjusted for additional stability if needed.
Step 3
NOTE: Levelers can be used for
adjustment if needed.

Do not put hot items directly on furniture surface.
Do not clean furniture with harsh cleansers or polish.
Do not place furniture in direct sunlight.
Do not place furniture near heating or cooling vents.
Do not write on furniture without a padded barrier to protect the surface.
Do not place furniture outside. For indoor use only.
Not for commercial use. For residential use only.
Dust and pick-up spills using a clean,non-colored, lint-free cloth.
Cleaner
Page 7
Care & Maintenance