World Market Rianna Ribbed 608144 User manual

Page 1
Rianna Ribbed 2-Drawer Desk
SKU - 608144
Assembly Instruction
THANK YOU FOR YOUR PURCHASE. IF YOU HAVE ANY QUESTIONS
PERTAINING TO THE ASSEMBLY OF THIS FURNITURE PIECE, PLEASE CONTACT
THE NEAREST COST PLUS WORLD MARKET STORE.
IF YOU ARE NOT NEAR A STORE, PLEASE CALL OUR CUSTOM ER SERVICE CALL
CENTER TOLL FREE AT 877- 967-5362 FOR ASSISTANCE.
NOT FOR COMMERCIAL USE

Component List
Top
Left Leg
1
1
A
B-1
Page 2
8
12
H-1
H-2
H-3
Hardware & Tool List
Allen Key
4
T-1
4
Metal Bracket
Stretcher
2
1
C
D
PICTURE
LABEL
Long Allen Bolt
M6 x 30mm
Short Allen Bolt
M6 x 15mm
Washer
Ø16mm x Ø7mm
Ø4mm x 110mm
Right Leg
B-2 1
1
H-4 Lock Washer
Ø15mm x Ø9mm

Assembly Preparation
Before Beginning:
•
•
•
•
•
•
•Unpack all hardware bags and components to ensure you have all parts-
Read instructions, cover to cover-
Have 2 adults on hand for assembly-
Do not assemble on flooring or carpet-
Assemble on a clean non-marring surface (packing foam) -
Save all packing until finished-
In case of missing part call 877-967-5362
Page 3

Assembly Steps
Page 4
Step-1
Step-2
Gently pull out the drawer and insert the hand to unlock the drawer as illustrated. Now pull out the
drawers completely to move on to the assembly process.
H-3
6x
T-1 H-1
A
B
B
Top
Front
Place the Top (A) upside down on a padded non-marring surface. Align the pre-drilled holes on the
Left Leg (B-1) to the holes on the side panel of the Top (A) as illustrated. From inner side secure
connection using Long Allen Bolt (H1) and Washer (H3) with the help of Allen Key (T1). Repeat
same step to assemble Right Leg (B-2). Do not fully tighten connection yet.
1
1
2
2

Assembly Steps
Page 5
Step-3
Step-4
2x
H-3
T-1
H-1
B
B
D
Top
Front
On the back side align the Metal Bracket (C) with the pre-drilled holes on the Legs (B)
and underneath Top (A) as illustrated. With the help of Allen Key (T1) secure connection using
Short Allen Bolt (H2), Spring Washer (H4) and Washer (H3) in the sequence as illustrated above.
Do not fully tighten connection.
T-1
H-2
4x
A
B
C
H-4
H-3
Align the stretcher (D) to the pre-cut slot on the Leg (B) ensuring the holes on the stretcher
matches holes on the Leg. Secure connection using longer Long Allen Bolt (H1) and Washer (H3)
with the help of Allen Key (T1). Do not fully tighten connection.

Assembly Steps
Page 6
Step-5
Step-6
Fully tighten all connection using Allen Key (T1).
Using a second person to assist you, carefully turn the desk assembly into the upright position.
Gently insert the drawers to the position matching the label as shown above and turn the inner
drawer lock in reverse direction following Step-1. Ensure the desk legs sits evenly and all
Allen bolts from steps 2-4 have been fully tightened. Adjustable levelers on the bottom
of each post can be used for additional leveling adjustments if needed. Assembly is complete
and the product is ready to use.
T-1
12x
NOTE: Levelers can be used for adjustment if needed.
1
2
2
1
1

E
F
G
H
I
Page 6
Bracket (E)
Long screw (F)
Drywall
Figure A Figure B
Top
Bracket (E)
Strap (H)
Figure C
Short screw (G)
Anti-Tip Measures
          


 

 


 
  
 
 

Page 8