World Market Fallon 550021 User manual

Page - 1
Fallon Cocoon Chair With Legs
SKU –550021
Assembly Instructions
THANK YOU FOR PURCHASE.
IF YOU HAVE ANY QUESTIONS PERTAINING TO THE ASSEMBLY OF
THIS FURNITURE PIECE, PLEASE CONTACT THE NEAREST
COST PLUS WORLD MARKET STORE. IF YOU ARE NOT NEAR A STORE,
PLEASE CALL OUR CUSTOMER SERVICE CALL CENTER
TOLL FREE AT877-967-5362 FORASSISTANCE.

Page - 2
Part list
Label
Picture
Description
Qty
A
Chair Seat
1
B
Chair Base
1
Label
Picture
Description
Qty
H1
Bolt
(M6 x 52 mm)
(M
6 x
52
m
m)
6
H2
Flat Washer
(M18 x 6mm)
6
H3
Spring Washer
(M16 x 6mm)
6
Label
Picture
Description
Qty
T1
Allen Key
1
Hardware list
Tool list

Page - 3
Page - 3
• Unpack all hardware bags and components to ensure you have all parts-
• Read instructions, cover to cover-
• Have 2 adults on hand for assembly-
•
Step 1
H1
A
H2
T1
(H1) Bolt x 6
(H2) Flat Washer x 6
D
A
B
C
B
H1
H2
T1
Assembly Preparation
Before Beginning :
T1
H2
C
D
H1
A
B
Assembly Steps
(H3) Spring washer X 6
Attach the frame to the headboard using H1 Bolt, H2
Washer and the H3 Nut loosely into the HB and the
metal frame to allow centering and adjustment to HB
before fully tightening.
Position and align the holes on leg (B) to the holes at bottom of the
seat (A), secure using bolt (H1), flat washer (H2) and spring washer
(H3) Loosely tighten to install the remaining bolts, Once all bolts are
engaged, fully tighten each bolts using allen key (T1)
Page - 3
Page - 3
• Unpack all hardware bags and components to ensure you have all parts-
• Read instructions, cover to cover-
• Have 2 adults on hand for assembly-
•
Step 1
H1
A
H2
T1
(H1) Bolt x 6
(H2) Flat Washer x 6
D
A
B
C
B
H1
H2
T1
Assembly Preparation
Before Beginning :
T1
H2
C
D
H1
A
B
Assembly Steps
(H3) Spring washer X 6
Attach the frame to the headboard using H1 Bolt, H2
Washer and the H3 Nut loosely into the HB and the
metal frame to allow centering and adjustment to HB
before fully tightening.
Position and align the holes on leg (B) to the holes at bottom of the
seat (A), secure using bolt (H1), flat washer (H2) and spring washer
(H3) Loosely tighten to install the remaining bolts, Once all bolts are
engaged, fully tighten each bolts using allen key (T1)
Page - 3
Page - 3
• Unpack all hardware bags and components to ensure you have all parts-
• Read instructions, cover to cover-
• Have 2 adults on hand for assembly-
•
Step 1
H1
A
H2
T1
(H1) Bolt x 6
(H2) Flat Washer x 6
D
A
B
C
B
H1
H2
T1
Assembly Preparation
Before Beginning :
T1
H2
C
D
H1
A
B
Assembly Steps
(H3) Spring washer X 6
Attach the frame to the headboard using H1 Bolt, H2
Washer and the H3 Nut loosely into the HB and the
metal frame to allow centering and adjustment to HB
before fully tightening.
Position and align the holes on leg (B) to the holes at bottom of the
seat (A), secure using bolt (H1), flat washer (H2) and spring washer
(H3) Loosely tighten to install the remaining bolts, Once all bolts are
engaged, fully tighten each bolts using allen key (T1)
Lay and align the holes on leg (B) to the holes at bottom of the
seat (A), secure using bolt (H1), flat washer (H2) and spring washer
(H3) Loosely tighten to install the remaining bolts, Once all bolts are
engaged, fully tighten each bolts using allen key (T1)
Lay the seat (A) on it's front as shown and align the holes on base (B) to the holes at
bottom of the seat (A), secure using bolt (H1), flat washer (H2) and spring washer (H3)
loosely tighten to install the remaining bolts, once all bolts are engaged,
fully tighten each bolts using allen key (T1).

Page - 4
•
•
•
Care & Maintenance
Do not put hot items directly •
on furniture surface.
Do not clean furniture with
harsh cleansers or polish.
•
Do not place furniture in
direct sunlight.
•
• Do not place furniture near
heating or cooling vents.
Do not write on furniture
without a padded barrier to
protect the surface.
Do not place furniture outside.
For indoor use only.
Not for commercial use.
For residential use only.
• Dust and pick-up spills using a clean, non-colored, lint-free cloth.
• Stains may be removed with mild soap solution and damp cloth
Step 2
B
H1
A
A
H1
C
B
H2
H2
C
T1
T1
D
your chair is now ready to use
Page - 4
Page - 4
•
•
•
Care & Maintenance
Do not put hot items directly •
on furniture surface.
Do not clean furniture with
harsh cleansers or polish.
•
Do not place furniture in
direct sunlight.
•
• Do not place furniture near
heating or cooling vents.
Do not write on furniture
without a padded barrier to
protect the surface.
Do not place furniture outside.
For indoor use only.
Not for commercial use.
For residential use only.
• Dust and pick-up spills using a clean, non-colored, lint-free cloth.
• Stains may be removed with mild soap solution and damp cloth
Step 2
B
H1
A
A
H1
C
B
H2
H2
C
T1
T1
D
your chair is now ready to use
Page - 4
Page - 4
•
•
•
Care & Maintenance
Do not put hot items directly •
on furniture surface.
Do not clean furniture with
harsh cleansers or polish.
•
Do not place furniture in
direct sunlight.
•
• Do not place furniture near
heating or cooling vents.
Do not write on furniture
without a padded barrier to
protect the surface.
Do not place furniture outside.
For indoor use only.
Not for commercial use.
For residential use only.
• Dust and pick-up spills using a clean, non-colored, lint-free cloth.
• Stains may be removed with mild soap solution and damp cloth
Step 2
B
H1
A
A
H1
C
B
H2
H2
C
T1
T1
D
your chair is now ready to use
Page - 4
Turn the chair upright, the chair is ready to use!