WRC SBX-1 User manual

SBX is a new generation high quality 1/8 scale nitro off-road buggy.
SBX is supplied in a box,you can download the Instruction manual from www.wrc-racing.com
Its use is intended for more than 16 years old persons with experience on rc model car field.
Children and all the persons without this requirement MUST have direct supervision of a
knowledgeable adult responsible.
Please don't hesitate to contact WRC support at [email protected] for any problem or
question.
Also kindly visit our website www.wrc-racing.com to find last updates, set-up information, option
parts and other information.
W.R.C. world racing car s.r.l.
Via Meucci, 23/B
36040 Brendola (VI)
ITALY
Phone: [phone]
fax: [phone]
E-mail: [email protected]
Website: www.wrc-racing.com
CUSTOMER SUPPORT
WRC guarantees this model kit to be free from defects in both material and workmanship within 30
days of purchase.
The total monetary value under warranty will in no case exceed the cost of the original kit
purchased.
This warranty doesn't cover any compnents damaged by use or modification or as result of wear.
Part or parts missing from this kit must be reported within 30 days of purchase.
No part or parts will be sent under warranty without proof of purchase.
If you find a defective or missing part, contact the local distributor.
Customer service and support will be provided through local hobby store.
No warranties are expressed or implied that cover damage caused by what is considered normal
use or cover or imply how long any model cars' components or electric components will last before
requiring replacement.
Due to the high performance level of this model car you will need to periodically maintain and
replace consumable components; any and all warranty coverage will not cover replacement of any
part or component damaged by neglect, abuse or improper or unreasonable use.
This includes but is not limited to damage from crashing, excessive moistur, improper use or no
maintenance or user modifications which compromise the integrity of components.
Warranty will not cover compnents that are considered consumable on RC model car.
WRC doesn't pay nor refund on any component sent from WRC or its distributor for warranty.
WRC reserves the right to make final determination of the warranty status of any component or part
Use only original WRC spare part:
WARRANTY
Assemble the kit only away from the reach of children.
Follow the building and operating instructions using the utmost care.
Don't put any part of your body inside rotating and moving elements as this may cause damage or
serious injury.
Check and clean the model before putting it away.
Don't use your model car in public places or in roads and areas where it could generate conflict with
person or vehicular traffic.
The model car is controlled by radio: you MUST put great care to avoid loss of radio control always
keeping a safety margin all around your model in order to prevent any collision.
Operating frequency: check and be sure it is clear and not shared with anybody at same time; it could
cause loss of control of the RC model.
Always turn on your transmitter before you turn on the receiver in the car and always turn off the
receiver before you turn off your transmitter.
Keep the wheels of the model off the ground when checking the operation of the radio equipment.
Disconnect the battery pack before storing your model.
GENERAL INFORMATION
Instruction Manual MUST be read and fully understood before to start building and operating
functions.
Always keep Instruction Manual in safety place, ready to be consulted for any reference you need.
Use only original WRC spare parts.
SAFETY PRECAUTIONS
INTRODUCTION

RING PLIERS
ALLEN:
1.5 MM.
2.0 MM.
2.5 MM.
3.0 MM.
SIDE CUTTER
SCISSORS
STARTER POCKET BOOSTER
TECHNICAL INFORMATION
- BRAKE:Laser cut brake disck with Ferodo brake pad
- WHEELS LOCK:Lightweight 17 mm 7075 T6 Nut
- CHASSIS:3.0 mm Swiss 7075 T6 aluminium
- RADIO PLATE:Composite Material
- DRIVETRAIN TYPE:Spring steel CVD Driveshfts
- FRONT DIFFERENTIAL:Differential Gear
- REAR DIFFERENTIAL:Differential Gear
- SUSPENSION:Pivot ball suspension
- RIDE HEIGHT:Adjustable Front & Rear
- CAMBER:Adjustable Front & Rear
- CASTER:Adjustable Front
- TOE:Adjustable Front & Rear
- ROLLCENTER:Adjustable Front & Rear
- ACKERMANN:Adjustable Front
- ANTI-ROLL BARS:Adjustable Front & Rear
TECHNICAL DATA
- WIDTH .............................................310 mm
- WHEEL BASE ............adjustable 315-320 mm.
ADDITIONAL ITEMS NEEDED FOR COMPLETION (REQUIRED BUT NOT INCLUDED IN THE KIT)
ENGINE AND MUFFLER
TOOLS REQUIRED
THESE TOOLS ARE NOT INCLUDED IN THE KIT BUT ARE REQUIRED FOR PROPER ASSEMBLY
2 LOW PROFILE STEERING SERVO
TRANSMITTER
THE FOLLOWING ITEMS ARE NEEDED FOR COMPLETION OF THE SBX; THEY ARE NOT INCLUDED IN THIS KIT (UNLESS NOTED) AND
SHOULD BE OBTEINED FROM YOUR LOCAL HOBBY SHOP.
BE SURE TO READ THE INSTRUCTION COMPLETELY PRIOR TO ASSEMBLY
NOTICE:
RECEIVER
AA ALKALINE BATTERIES
FOR TRANSMITTER
AND RECEIVER
WHEEL - TYRES - INSERTS
FUEL AND FUEL PUMP
2

100802
95014
O-ring 6x2
100809
100805
100810
100811
100815
97000
Ø2.5x11.8
90024
8x16x5
100812-1
DIFFERENTIAL OIL :
Central : 5000 cst
Weight : 3 g
100812-1
90024
8x16x5
100803
95014
O-ring 6x2
100809
97000
Ø2.5x11.8
100805
100804-05
92004
M3 x12
Fill the differential up to the top of the pin.
DO NOT fill the diff. to the top of the housing.
OPTIONAL
100804-01 (0.1mm)
100804-02 (0.2mm)
Central Diff. Gear
3
BAG.1

100802-L
95014
O-ring 6x2
100809
100805
100810
100811
100815
97000
Ø2.5x11.8
90024
8x16x5
100812
DIFFERENTIAL OIL :
Front : 5000 cst
Weight : 3 g
100812
90024
8x16x5
100813-L
95014
O-ring 6x2
100809
97000
Ø2.5x11.8
100805
100816
12x6x0.5
100804-05
92004
M3 x12
OPTIONAL
100804-01 (0.1mm)
100804-02 (0.2mm)
Fill the differential up to the top of the pin.
DO NOT fill the diff. to the top of the housing.
Front Diff. Gear
4
BAG.2

100802-L
95014
O-ring 6x2
100809
100805
100810
100811
100815
97000
Ø2.5x11.8
90024
8x16x5
100812
DIFFERENTIAL OIL :
Rear : 2000 cst
Weight : 3 g
100812
90024
8x16x5
100813-L
95014
O-ring 6x2
100809
97000
Ø2.5x11.8
100805
100816
12x6x0.5
100804-05
92004
M3 x12
OPTIONAL
100804-01 (0.1mm)
100804-02 (0.2mm)
Fill the differential up to the top of the pin.
DO NOT fill the diff. to the top of the housing.
Rear Diff. Gear
5
BAG.3

98015
M5x4
90024
8x16x5
100201
100616
100201
100509
100313
93005
M3 x14
93007
M3 x18
100203
PIN : 100123
100817
13.2x15.9x0.2
Cut on both front
and rear bulkhead blocks
GREASE
100611
100603
100612
100606
97022
Ø2.5x14.8
Rear Transmission
6
BAG.4

98015
M5x4
90024
8x16x5
100201
100616
100201
100508
93005
M3 x14
93007
M3 x18
100203
PIN : 100123
100817
13.2x15.9x0.2
GREASE
100610
100603
100612
100606
97022
Ø2.5x14.8
Cut on both front
and rear bulkhead blocks
Front Transmission
7
BAG.5

92008
M3 x20
91011
M3x40
100506 F-F
100302-S (Soft)
100507 F-R
97024
Ø4x65
100301
100512 100512
Lower Arm Position
Lower Arm Position
100302
98019
M5x8
AA
1
OPTIONAL
100302-M (Medium)
100302-H (Hard)
Assemble 2 sets
Front Suspension
8
BAG.6

93037
M2.5 x 8
98016
M3X5
100517.23
98000
M3x3
91010
M3x20
.
.
91010
M3x20
98000
M3x3
03086-1
98004
M3x12
03069-3
100116
100512 100514
100704
93002
M3 x8
100312
93002
M3 x8
100420
100300-S (Soft)
100300
100300
97023
Ø4x45
93004
M3 x12
100512
OPTIONAL
100300-M (Medium)
100300-H (Hard)
Upper Arm Position
Upper Arm Position
Assemble 2 sets
Front Suspension
9
BAG.7

GREASE
100437-1.5
100816
6x12x0.5
OPTIONAL
100437-1 (1mm)
100437-2 (2mm)
90025
15x21x4
100314
100414
100119
100410
90026
8x16x5
100520
93004
M3 x12
97025
Ø3x16.7
98015
M5x4
100605
97022
Ø2.5x14.8
100607
100606
GREASE
Front Upright
10
BAG.8
Assemble 2 sets

91011
M3x40
100510
100512
100301-S (Soft)
97024
Ø4x65
100512
100511
92008
M3x20
Assemble 2 sets
OPTIONAL
100301-M (Medium)
100301-H (Hard)
03086-1
98004
M3x12
03069-3
100116
Assemble 2 sets
100516.27
93037
M2.5 x 8
98016
M3X5
91010
M3x20
.
.
OPTIONAL
100516.26 (2.6mm)
100516.28 (2.8mm)
91010
M3x20
98000
M3x3
98000
M3x3
98000
M3x3
98019
M5x8
AA
1
Lower Arm Position
Lower Arm Position
100301
Rear Suspension
11
BAG.9

100605
97022
Ø2.5x14.8
100607
100606
GREASE
90025
15x21x4
100304
90026
8x16x5
97025
Ø3x17
100410
98015
M5x4
98000
M3x3
100404
100301
94009
M3 Autolock
94009
M3 Autolock
Assemble 2 sets
Rear Suspension
12
BAG.10

100307
100406
100307
100118
100118
Assemble 2 sets
20
93013
M3 x28
94009
M3 Autolock
93001
M3x6
100515
93007
M3 x18
03242
3x7x2.5
94009
M3 Autolock
94009
M3 Autolock
03242
3x7x2.5
93013
M3 x28
93007
M3 x18
93008
M3 x20
94009
M3 Autolock
100320
93006
M3 x16
94009
M3 Autolock
Rear Suspension
13
BAG.11

92029
M4x16
100401
92004
M3 x12
100305
94009
M3 Autolock
93006
M3 x16
93004
M3 x12
94002
M3 Autolock
100407
92021
M4x10
Front & Rear Assembly
14
BAG.12

100405
100310
100120
100310
100120
23.5
100518
92003
M3 x10
93004
M3 x12
100413
100412
100309
100309
100408
90001
6x10x3
100408
100309
90001
6x10x3
100409
90001
6x10x3
.
.
90001
6x10x3
95015
OR 12x1.5
100309
.
..
92029
M4x16 Svas
92004
M3x12
94009
M3 Autolock
100306
93004
M3 x12
93004
M3 x12
93004
M3 x12
100311 94009
M3 Autolock
Front & Rear Assembly
15
BAG.12
Assemble 2 set

100202
100608
93014
M3x17
2.5
2
93013 M3 x28
92002 M3 x8 Svas
100422
100501
98000
M3x3
90019
5x8 flanged
100418
100422 100419
3
100604
100202
100202
92002
M3x8
100602
92021
M4x10
100303
93001
M3 x6
93001
M3 x6
1
INTERNAL SIZE
Front & Rear Assembly
16
BAG.13

96001
M4 x 10
92020
M4 x 8
98012
M4x4
00129
100435
NOT INCLUDED
91001
M3x10
100400
100426
100432
96002
M3 x8
90000-1
5x10x4
100431
13 T
90000-1
5x10x4
100428
100427
OPTIONAL
100427-1
CARBON FIBER
Engine
17
BAG.14

100326
OPTIONAL
NOT INCLUDED
100325
93005
M3 x14
100318
92003
M3x10
Fuel Tank
18
BAG.15

03069
03086-1
03061-35
03086-1
03069
22
93002
M3 x8
100327
92003
M3 x10
93001
M3 x6
NOT INCLUDED
93037
M2.5x8
100901 93036
M2.5 x 6
92003
M3 x10
19
BAG.16
Radio Case