WRC STX User manual

ITALY
INTRODUCTION
SAFETY PRECAUTIONS
Phone: [phone]
fax: [phone]
E-mail: [e-mail]
Use only original WRC spare parts.
GENERAL INFORMATION
Always keep Instruction Manual in safety place, ready to be consulted for any reference you need.
functions.
Instruction Manual MUST be read and fully understood before to start building and operating
Website: www.wrc-racing.com
use or cover or imply how long any model cars' components or electric components will last before
requiring replacement.
Due to the high performance level of this model car you will need to periodically maintain and
replace consumable components; any and all warranty coverage will not cover replacement of any
part or component damaged by neglect, abuse or improper or unreasonable use.
This includes but is not limited to damage from crashing, excessive moistur, improper use or no
maintenance or user modifications which compromise the integrity of components.
Warranty will not cover compnents that are considered consumable on RC model car.
WRC doesn't pay nor refund on any component sent from WRC or its distributor for warranty.
WRC reserves the right to make final determination of the warranty status of any component or part
Disconnect the battery pack before storing your model.
WARRANTY
Keep the wheels of the model off the ground when checking the operation of the radio equipment.
receiver before you turn off your transmitter.
Always turn on your transmitter before you turn on the receiver in the car and always turn off the
cause loss of control of the RC model.
Operating frequency: check and be sure it is clear and not shared with anybody at same time; it could
keeping a safety margin all around your model in order to prevent any collision.
The model car is controlled by radio: you MUST put great care to avoid loss of radio control always
person or vehicular traffic.
Don't use your model car in public places or in roads and areas where it could generate conflict with
Check and clean the model before putting it away.
serious injury.
Don't put any part of your body inside rotating and moving elements as this may cause damage or
Follow the building and operating instructions using the utmost care.
Assemble the kit only away from the reach of children.
CUSTOMER SUPPORT
Use only original WRC spare part:
WRC guarantees this model kit to be free from defects in both material and workmanship within 30
days of purchase.
The total monetary value under warranty will in no case exceed the cost of the original kit
purchased.
This warranty doesn't cover any compnents damaged by use or modification or as result of wear.
Part or parts missing from this kit must be reported within 30 days of purchase.
No part or parts will be sent under warranty without proof of purchase.
If you find a defective or missing part, contact the local distributor.
Customer service and support will be provided through local hobby store.
No warranties are expressed or implied that cover damage caused by what is considered normal
Please don't hesitate to contact WRC support at [e-mail] for any problem or question.
Also kindly visit our website www.wrc-racing.com to find last updates, set-up information, option
parts and other information.
W.R.C. world racing car s.r.l.
Via Meucci, 23/B
36040 Brendola (VI)
STX is a new generation high quality 1/10 scale touring car.
STX is supplied in a box equipped with Instruction Manual.
Its use is intended for more than 16 years old persons with experience on rc model car field.
Children and all the persons without this requirement MUST have direct supervision of a
knowledgeable adult responsible.

THESE TOOLS ARE NOT INCLUDED IN THE KIT BUT ARE REQUIRED FOR PROPER ASSEMBLY
TECHNICAL INFORMATION
RING PLIERS
3.0 MM
- LENGHT ............................................. 373 MM.
SOCKET:
5.5 MM
7.0 MM
THE FOLOWING ITEMS ARE NEEDED FOR COMPLETION PF THE STX; THEY ARE NOT INCLUDED IN THIS KIT (UNLESS NOTED)
- DIFFERENTIAL GEAR
TECHNICAL DATA
- FULL BALL BEARING
- CARBON CHASSIS
- BUMPER /FRONT BACKSTOP
- WEIGHT CHASSIS............................. 515 GR.
REQUIRED BUT NOT INCLUDED IN THE KIT
ADDITIONAL ITEMS NEEDED FOR COMPLETION
LIPO BATTERY 7.4 V.
- ADJUSTABLE WHEEL BASE ............MIN. 250 MM. - MAX 256 MM.
SIDE CUTTER
TOOLS REQUIRED
PINION GEAR
SPEED CONTROLLER LOW PROFILE STEERING SERVO
TRANSMITTERELECTRIC MOTOR
- WIDTH .............................................187 MM.
BE SURE TO READ THE INSTRUCTION COMPLETELY PRIOR TO ASSEMBLY
NOTICE:
RECEIVER
AND SHOULD BE OBTEINED FROM YOUR LOCAL HOBBY SHOP.
FOR TRANSMITTER WHEEL - TYRES - INSERTS
LEXAN BODYLIPO BATTERY TAPE
AA ALKALINE BATTERIES
- TRANSMISSION: 4 DRIVE WHEELS
- BODY: TOURING MODEL (NOT INCLUDED)
- ADJUSTABLE FRONT TOE, CAMBER AND CASTER
- ADJUSTABLE REAR TOE AND CAMBER
ALLEN :
1.5 MM
2.0 MM
SCISSORS

3
92001
M3 x6
03340
OPTIONAL
+/- FLEX
03012
03013-2
03007-1
03019-3
92001
M3 x6
03072-3
92001
M3x6
03014-1
03044
93004
M3 x12
03023-3
93002
M3 x10
03019-3
03072-3
92001
M3x6
03010-8
03007-1
03019-3 BR
OPTIONAL
WEIGHT 4 gr.
BAG 1

03001
03083-7
90006
10_15_4
93000
M3 x4
03083-6
93003
M3 x10
RC 4087 (87T)
03004-1
03004
90000
5-10-4
03004
SOLID FRONT AXEL
CENTRAL TRASMISSION
4
BAG 2
RC6092 92 T
RC6096 96 T
RC60100 100 T
RC60104 104 T
RC60106 106 T
RC60108 108 T
RC60110 110 T
RC60112 112 T
RC60114 114 T
RC60116 116 T
RC60118 118 T
SPUR GEAR P64
RC4078 78 T
RC4084 84 T
RC4087 87 T
SPUR GEAR P48

03089-5
03089-6
97006
Ø2x9
95006
95005
03089-3
03089-1M
03089-4
03089-2
03089-1F
92002
M3 x8
90006
10_15_4
A
A
03038-1
OPTIONAL NO BLADE
REAR DIFFERENTIAL
GEAR
Fill the differential up to the top of the pin.
DO NOT fill the diff. to the top of the housing.
SILICONE OIL 2000
5

03005
03002-5
93004
M3 x12
03063
03064
03015
03041
93000
M3 x4
93001
M3 x6
6

98007
M4X8
03048
98005
M3X8
03048-3
03048-2
93009
M2 x 5
2.2
03003-1
3
98005
M3X8
03049
98007
M4X8
03035-4
2.2
2,5
FRONT BELT ADJUSTMENT REAR BELT ADJUSTMENT
FRONT
REAR
-
+
-
+
7
BAG 3

03072-3
03018
92001
M3 x6
03018-1
03040
03025-2
3x6x2
03048
97012
Ø3x45
03018-1
03040
03025-2
3x6x2
97010
Ø3x50
03049
03025-2
3x6x2
03072-3
92001
M3 x6
03018 BR
OPTIONAL
WEIGHT 8 gr.
03025-2
3x6x1
8

WHIDT 168 mm
WHIDT 170 mm
ANGLE °
SEE TABLE
ANGLE °
SEE TABLE
9
PLEASE SEE
EXTERNAL NUMBER
PLEASE SEE
EXTERNAL NUMBER
PLEASE SEE
EXTERNAL NUMBER
PLEASE SEE
EXTERNAL NUMBER
FRONT
REAR
REAR-FRONT
REAR-REAR
FRONT-REAR
FRONT-FRONT
REAR-FRONT
REAR-REAR
2.5
-1°
-1.5°
1
1.5
FRONT-REAR
2.5
+ 0.5°
2.5
FRONT-FRONT
0°
3
-2.5° 2.5
-2° 2
-3.5° 3.5
-3° 3

03054-2
90000
5-10-4
03026
90020
5-10-3
Ø3
91003
M2X5
97005
Ø2x10
03082 (5mm)
optional. 03082-1(5.5mm)
03082-2(6mm)
93003
M3 x10
03076
long
03075
short
03071-SX-H (hard)
03071-SX-S (soft)optional
03071-DX-H (hard)
03071-DX-S (soft)optional
03056-1
03027
91003
M2X5
97005
Ø2x10
LEFT - RIGHT FRONT SUSPENSION
LEFT SIDE
RIGHT SIDE
LEFT - RIGHT REAR SUSPENSION
LEFT SIDE RIGHT SIDE
10
BAG 4

93004
M3 x12
03033-3
03002-5 03035-4
03003
03061-30
03003
03035-10
98003
M3X4
03050
opt. 03035-6
(6mm)
03032-4
98003
M3X4
03050
03002-5
03003
03061-30
03035-10
03200-2
2mm
03035-4
93004
M3 x12
opt. 03035-6 (6mm)
15.5
98003
M3X4
12.5
11
FRONT
REAR

02050
03035-10
92006
M3 x16
94009
03336
92004
M3 x12
93002
M3 x8
93001
M3 x6
03029-2
03029-4
03029-2
servo
(not included)
03055
93002
M3 x8
03055
03035-4
93002
M3 x8
03035-4
03194
03193
90014
3_6_2.5
93003
M3 x10
DYNAMIC STERRING RAIL
12
BAG 5

03003
03061-35
03003
03003
03061-30
03003
03204-3
OPTIONAL
03009-1
03204
OPTIONAL
03045-1
93001
M3 x6
93001
M3 x6
93001
M3 x6
24.5
STERRING BRACKETSERVO BRACKET
13
03061-35
9
00125
13

98003
M3X4
90016
4x7x2.5
03034
98000
M3X3
03003
03003
98003
M3X4
03003
90016
4x7x2.5
03034
98000
M3x3
03035-4
FRONT ANTI ROLL BAR
Ø 1.4
03031-4
OPTIONAL
COD
ANTI ROLL BAR
03031-2 Ø 1.2
03031-3
Ø 1.3
STANDARD IN KIT
Ø
REAR ANTI ROLL BAR
Ø 1.5
OPTIONAL
OPTIONAL
03031-5
03031-6
Ø 1.6
14
OPTIONAL
ANTI ROLL BAR
Ø 1.2
Ø 1.3
Ø
Ø 1.5
OPTIONAL
03031-6
03031-4
COD
03031-2
03031-3
OPTIONAL
STANDARD IN KIT
OPTIONAL
03031-5
Ø 1.4
Ø 1.6
OPTIONAL
03031-1
OPTIONAL
Ø 1.1
BAG 6

03170-7
03170-2
02043-4
95000
02043
02043-8
95001
12x1,6
03170-1
03170-3
03086
03170-11
99003
02043-4
3 HOLES
03170-4
03086
03086
8,1
3
3
CODE CST
RC0028 200
RC0028-1 300
RC0029 400 (IN KIT)
RC0062 500
RC0030 600
RC0063 700
RC0031 800
WRC SHOCKS OIL
6
5
43
2
1
SHOCK FILLING
Fully extend the piston rod so the
piston is at the bottom of the shock
body.
Hold the shock upright and fill the
shock body with shock oil as in the
picture.
Let the oil settle and allow air bubbles
to rise to the top.
Slowly move the piston up and down
until no more air bubbles appear.
Add shock oil as necessary.
Pull the piston rod most of the way out
of the shock bod.
Let the shock rest for 5 minutes to
allow the air bubbles to scape.
03170-8
2.6
COLOUR
Force (lb)
2.2
03170-6
2.1
03170-5
SPRINGS
COD
03170-7 2.3
03170-9
BLACK
YELLOW
BLUE
RED IN KIT
FUCHSIA
GREEN
1.4-3.5
1.3-2.9
PROGRESSIVE SPRINGS
03170-10
15
FRONT - REAR

93001
M3 x6
03069
03170
93001
M3 x6
03069
16

03081
03081
97015
2x12
93001
M3X6
03085 03068
92002
M3X8
03011-2
03016
03011-2
92003
M3 x10
92003
M3x10
92002
M3 x8
92002
M3 x8
03023
03023-2
03023
02081
opt.03011-1(carbon)
96002
M3 x8
flanged
NOT INCLUDED
NOT INCLUDED
NOT INCLUDED
NOT INCLUDED
P-ONE TYRES
02039
17
BAG 7

FRONT TOE
IN OUT
DIFF.
POSITION
UP DOWN
4° C
HUB
5 mm
OFF SET
1
2
1
2
REAR
HUB
DIFF.
POSITION
UP DOWN
REAR TOE
IN OUT
1 2
3
3
ANTI-ROLL BAR
LENGHT /mm
FINAL DRIVE RATIO
PISTON:
OIL:
SPRINGS:
REAR
FRONT
SHOCKS
REAR
FRONT
SPUR GEAR PINION
TRANSIMISSION
FAST MEDIUM TIGHT
BUMPY MEDIUM
SIZE
SURFACE
SMOOTH
HIGH MEDIUM LOW
TRACTION
TRACK CONDITION
TRACK
DATE
NAME
COLOUR
400 400
3 HOLE 3 HOLE
FRONT
REAR
1.3 mm
1.2 mm
DOWNSTOP 5.5 mm 4.5 mm
2 mm
SHIM SHIM
2 mm
SHIM
0 mm
SHIM
4 mm
SHIM
0 mm
CAMBER
--
++
FRONT REAR
mm
FRONT RIDE
HEIGHT
mm
REAR RIDE
HEIGHT
SHOCK
POSITION
SHOCK
POSITION
ROLL CENTER UPPER CLAMP
FRONT - FRONT
ECCENTRIC BUSHINGS
REAR - REAR
REAR - FRONT
STANDARD
POSITION
REAR - FRONT
STANDARD
POSITION
0
0.5°
2 mm
SHIM
2 mm
SHIM
3 mm
SHIM
2 mm
SHIM
55
FRONT
ROLL CENTER
REAR
BODY WING
0.5 mm
0.5 mm
ASPHALT
RED
RED
1.5°
2°2°
3°
OFF SET
5 mm
3
H S
DIFFERENTIAL
SOLID AXLE
DIFFERENTIAL
OIL
2000

W.R.C. world racing car s.r.l. Via Meucci, 23/B 36040 Brendola (VI) ITALY
Phone: [phone] fax: [phone] [email protected]
wrc-racing.com