X-RIDER Honda RC213V-S User manual

The Saturn is a high performance RC motorcycle. This product has like the real motorcycle
setting, theperfect design of thefront wheels inverted shock absorber and rear wheel
pendulum arm suspension, achieves reliable grip performance. Front alloy calipers ensure
levels of braking performance.Rear wheel built-in gyro, easy control and ensure more stable
running of the motorcycle. Using the oil-filled steering dampers,better and faster turning.
A metal and carbonfibre chassis, high-gradefine. Inorder to exert theperformance, for
maximum enjoyment of this product,please read this manual carefully.
Thank you for purchasing Honda RC213V-S. We believe that this new motorcycle will bring you
infinite happiness. Before use, please read the manual carefully and safe keeping. Accidents
are caused by illegal use, the company doesn't undertake any responsibility.
We will have strict testing and debugging before exiting thefacility. We promise to customers.
Products issue without any material and process problems. We will free for customers to repair
within 90 days from the date of purchase. Customer service e-mail: [e-mail].
The warranty doesn't cover crash damage,modification,failure to maintenance, or thedamaged
caused by improper use.
The warranty doesn't cover any result which caused by the final user's assembly or the material
used for final user's assembly.
Pleasedownload theother language versions manual and parts list from our website :
http://www.cx3rider.com
请登录X-Rider 网站下载其它语言版本的说明书及配件图：http://www.cx3rider.com
土星是一款高性能遥控（R/C）摩托车模型。本产品拥有像真摩托车的设置，前轮倒立式避震和后轮单摆臂悬架
的结构，实现可靠的抓地性能。前轮采用合金刹车，有效减低及刹停速。后轮内置陀螺仪，操控更容易和稳定。
转向采用油压避震器，实现更好的转向。车身采用铝合金和碳纤板，高档精致。为了更加充分的发挥这些性能，
更好的体会其中乐趣，请在使用前仔细阅读说明书。
每辆摩托车出厂前都经过严格的测试与调试，我司保证，客户购买的产品打开包装后，无任何材料及工艺方面的
问题。购买之日起90 天内，我司将免费为客户维修。售后联系邮箱为[e-mail].
由于碰撞，翻车，用户自行更改配置，属于保养或者任何不当使用引起的损坏，将不在保修范围内。
由终端用户自行安装或自行安装所适用的材料引起的任何问题，亦不属于保修范围。
感谢您购买 Honda RC213V-S，相信这一全新产品会给您带来无限欢乐。在使用产品前请您认真阅读产品使
用指南，并妥善保管。因违反本手册中的安全注意事项及使用事项而导致的事故，本公司不承担任何责任。

【Safety Precautions / 安全说明】
1. The specification of the logo 关于本说明书中使用标识
Caution: this symbol indicates where caution is essential to avoid injury to yourself or others.
Note: this symbol indicates where give you a tip in use.
注意：此标识提醒您注意避免伤害到自己及其他人。
提示：此标识是作为一个小提示供使用过程中一个参考。
2. The use of power 关于产品使用的电源
· The product use lithium Polymer battery 7.4V/35C/1850mAh
· Never disassemble the polarity required for installation. This may lead to damage and leakage.
· While charging,the Lithium Polymer battery and charger become hot. Do not charge on top of inflammable
materials as this may cause fire.
· Do not operate the DC Peak Charger in direct sunlight or in high temperatures. Continually monitor the
charger while charging is in progress.
· Short circuit may cause fire or accident so never disassemble or modify the Lithium Polymer battery .
· Lithium Polymer batteries contain toxic metals. An exploding battery is extremely dangerous so never put
in fire.
· 本产品使用7.4V/35C/1850mAh 毫安的锂电池。
· 请注意电池的正负极, 以确保安装正确，错误的安装可能导致电池的损害及毒性物质泄露。
· 充电时，锂电池及充电器会变热，请不要在易燃材料上充电，否则可能会导致火灾事故等情况发生。
· 请不要在直射阳光下等高温场所进行充电。充电时，请不要长时间在充电附近。
· 短路可能会导致火灾，请不要分解或更改锂电池。
· 锂电池中含有害重金属，如破裂会非常危险，请勿投入火中。
3. The safety of Children 关于儿童安全
· This model is not a toy. It is designed for users over 15 yeas of age.
· A s the product includes small and sharp parts, assemble and store this product only in places out of the
reach of children.
· 此模型不是玩具。它为15岁及以上年龄设计。
· 此产品含有微小、尖锐部分，请在组装，使用及保存时避免婴幼儿触及。
4. The safety of User 关于使用者的人身安全
· It's highly recommended that first-time enthusiasts seek the advice of an experienced modeler before
operating this vehicle.
· Cutters,wire cutter and screwdrivers need careful handling.

· Do not touch moving gears. They can cause injury.
· During and after operation,the motor and batteries will be hot. Do not touch them until they havehad
time to cool down.
· 强烈推荐初次接触者在有经验者的指导下组装及操作此产品。
· 请小心使用剪刀，线钳及螺丝刀等。
· 请勿触及转动的齿轮。它们会导致受伤。
· 在模型运行中及运行后一段时间，电机和电池处于极热状态。在其冷却前请勿触及。
5. The range of use 关于产品的使用范围
· Do not run your car in sandy,dusty,wet conditions,on long wool carpet. Such surfaces can damage its
operating parts.
· Do not operate the model on public roads, in crowded places or near infants. It may cause accidents or
injury.
· This product emits electrical waves so do not operate: Inside an aircraft. Near automatic devices such as
automatic doors and fire alarms. Inside hospitals or medical equipment. Operating may cause accidents.
· 模型禁止在泥沙地，尘土飞扬地，潮湿地，长毛地毯上行驶。在此类表面行驶可导致零部件损坏。
· 请勿在公路，拥挤地区及儿童附近操纵模型，可能会导致危险情况发生。
· 请勿在飞机、自动门或报警器等自动控制机器附近、医院和电子医疗器械周边等场所内使用，本产品发出的电
波信号可能会对上述机器产生影响，造成失误。
6. The maintenance of product 关于产品的维护与保养
· Do not store this model in a high-temperature/humidity area or in direct sunlight.
· Do not use water,alcohol, or thinner to clean your car's body.
· Simply wipe it down with a clean,soft cloth.
· 请避免将模型放置在高温、潮湿及阳光直晒处。
· 请勿使用水、溶剂等清洗车壳.。
· 请用清洁软布擦拭。

【Illustration of Main Parts / 产 品 主 要 部 件 图 示 】
减震器
减震器固定板
碳纤车架
后减震器
油压推杆
电调
车壳(上)
车壳(下)
前轮
后轮
Body Lower Shell
Body Upper Shell
Front Wheel
Rear Wheel
无刷马达 Brushless Motor
Rear Shock absorber
Steering Shock
Steering Triple
Front Shock
前挡泥板Front Fender
电机齿轮组Belt Pulley
ESC
前刹车卡钳座
Front Brake Caliper
刹车线
Brake Cable
前刹车碟Front Brake Disc
锂电池Battery
Carbon Fibre Frames
Bike Stand车架固定座
Helmet头盔
Rider
骑士

内六角螺丝刀，车用小十字扳手，十字螺丝刀，镊子，内六角扳手
注意：电池连接电调前，请保持电调处于关闭状态。
摩托车 充电器
1set 1pc
防倾杆组
1set
【Ready To Run Preparation / 跑前准备工作】
Step1. Check all the parts in the box. 检查包装里的部件
When you open the box, you will find follow parts 打开包装盒，有以下部件：
Motorcycle Transmitter Battery Charge Anti-roll Bars USB Flash Disk Bike Stand
U盘
1set 1pc
Equipment Sold Separately: 以下配件客户需要单独购买：
Silicone Oil, Screw Glue, Tire Rubber 润滑油，螺丝胶，轮胎胶 。
Tool Required 以下工具在操作中有可能会使用到：
Hex screwdriver,Cross Wrench,Cross Screwdrive,Tweezers,Hex Wrench.
Step 2. Remove the R-Clip and the body shell 将车壳和车尾壳底部的R扣拆下并取出上下壳
Step 3. Connect the battery with the ESC. 连接电池与电子调速器的接线
Caustion: When connect the battery with the ESC, please keep the ESC in off state.
Step 4. Install anti-roll bars ,body shell and helmet. 安装摩托车的防倾杆、外壳和头盔。
1) Install the aniti-roll bar and put it set into the aniti-roll bar post then lock each of the grains.
将防倾杆安装到车架的插孔位置，并用机米将每个插孔锁紧。
2) Install the helment on the body shell, then install the boday shell on the main frame,fix the body shell
post with the R-clip.先将头盔安装在车壳上，再将整个车壳安装在车架上，车壳柱穿过车壳并用R扣固定。
发射机
1pc
固定架

Left Neutral Right
左转 中立 右转
To make a right turn, turn the steering
wheel to the right. The motorcycle
should lean to the right.
If the balance bar touches the ground,
the motorcycle will not turn well. Turn
steering left to return to uprightposture.
When upright, straighten(neutral)
steering.
向右倾斜时，摩托车右转。 当防倾斜杆接触地面时，车子会走得不顺畅；
请右调方向轮，摩托车回到直立位置。
当直立位置时，方向轮在中立位置。
Basic Controls: 基本操作
Caution : RC Motorcycle comes with a Counter-Steering System. It means the direction between the
transmitter steering wheel and the motorcycle front wheel are opposite.
Please setting AUX of the remote control when power on.(Refer to the manual of the remote control .)
注意：遥控摩托车的操作系统是反向的，遥控器的操控轮与摩托车前轮的方向相反。
开机之后请对遥控器进行混控设置，三通或四通开关式混控无效（具体的设置请另行参考各品牌遥控器操作）。
如非标配的刹车舵机，操控摩托车之前请设置好刹车舵机的角度行程，以防舵机机构扫齿。
To return the motorcycle from a leaning posture to and upright posture,turn the steering in the opposite
direction to the lean. 使摩托车从倾斜位置到直立位置时，请反方面调节。
【Steering Setup / 正确行驶的技术要领】
【Steering Setup / 正确行驶的技术要领】

PB8-058
PB8-044-R
PB8-092
PB8-092
JM/M3x4
PB8-061 PB8-075
P/M2x6
PB8-046
PB8-047
P/M2x8
P/M2x8
PB8-047 PB8-046
PB8-075
P/M2x6
PB8-061
PB8-058
PB8-067
JM/M3x4
PB8-044-L
PB8-045
PB8-050
PB8-045
PB8-095
PB8-096
BL/Ø10xØ5x4
PB8-043
P/M2x6 PB8-016
PB8-017
M2
B/M2x6
【P1-1】
【P1-2】
Note : Pleaseapply the rim and the tire with CA glue after finishing assembly. Whenchange the tire,please
check the bearing haveany injured and apply the grear silicone oil.
Note : Please coated the screw glue first when
screwing down thesocket head screw(M2x6) .
提 示：锁杯头螺丝（M2x6）时需先涂上螺丝胶。
提 示 : 完成前轮安装后请将轮辋与轮胎用快干胶固定；如需更换轮胎请检查轴承是否损坏，同时再添加润滑油。
PB-092
Spacer 垫片 Ø5xØ7x0.3
Note : Please coated the screw glue first when screwing down
the flat head screw(M2x6) and the grains(M3x4).
提示：锁平头螺丝（M2x6）和机米（M3x4)时需先涂上螺丝胶。

PB8-040-A
PB8-040-B
PB8-040-M
PB8-040-H
PB8-040-D
PB8-040-F
PB8-040-I
PB8-040-F
PB8-040-I
PB8-040-E
PB8-040-L
PB8-040-G
B-M1.6x5
PB8-040-K
PB8-040-C
PB8-005
R/M3x10
R/M3x10
PB8-040
B/M2x5
PB8-040
PB8-048
JM/M3x4
JM/M3x4
PB8-116
PB8-083
PB8-025
PB8-094
P/M2x6 M2 PB8-085
BL/Ø10xØ5x4
PB8-088
PB8-113
PB8-109
PB8-087
JM/M3x2
PB8-087
PB8-084 B/M2x8
PB8-091
PB8-034
PB8-035
P/M2x10
PB8-111-1
PB8-114
BL/Ø10xØ5x4
BL/Ø10xØ5x4
BL/Ø8xØ5x2.5
PB8-086
BL(F)/Ø9xØ5x3
【P1-3】
【P2-1】
Note : Inject silicone oil #950 into the bottom of fork(PB8-040-C) ,coated the screw glue
first when screwing down theround head screw(M3x10) and the grains(M3x4).
提 示：油压脚(PB8-040-C) 灌入#950号避震油；锁圆头螺丝（M3x10）和机米（M3x4)时需先
涂上螺丝胶。
Note : Pleasegrease the planet gear firstwhen install thegyro pocket. Pls apply the rim and thetire with CA glue
after finishing assembly. When change thetire , please check thebearing haveany injured and apply the
grear silicone oil.
提 示 : 安装陀螺仪时请在行星齿上添加润滑油；完成陀螺仪安装后请将陀螺仪上下盖与轮胎用快干胶固定；如需更换
轮胎请检查轴承是否损坏 , 同时再添加润滑油。
PB-087 Spacer 垫片 Ø5.1xØ6.5x0.8
PB-088 Spacer 垫片 Ø5.1xØ6.5x2.3
PB-091 Spacer 垫片 Ø5.1xØ6.5x1.8
Note : Please coated the screw glue first when
screwing down the flat head screw(M2x6) .
提 示：锁平头螺丝（M2x6）时需先涂上螺丝胶。
ø8.00
1.55
This side inside 此面朝内

P/M3x10
PB8-092
S3M-225
PB8-092 PB8-039
P/M3x10
PB8-002
R/M3x8
B/M1.6x8
PB8-001
P/M3x8
PB8-052
PB8-002
R/M3x8
Ø3x2.5x2
Ø3x2.5x2
BL/Ø11xØ5x4
【P2-2】
Note : Please coated the screw glue first when screwing down
the flat head screw(M3x8) .
提 示：锁平头螺丝（M3x8）时需先涂上螺丝胶 。
PB8-006-R
R/M2.5x6
R/M3x6
P/M3x6
PB8-008-R
P/M3x6
PB8-070
PB8-072
PB8-068
PB8-063
PB8-069
BL/Ø11xØ5x4
PB8-006-L
PB8-069
PB8-072
PB8-070
R/M3x6 PB8-008-L
R/M3x6
P/M3x6
BL/
Ø
11x
Ø
5x4
【P3-1】
【P3-2】
Note : Pleasecoated thescrew glue first when screwing down
theflat head srew(M3x6) and the round head screw(M3x6).
提 示：锁平头螺丝（M3x6)和圆头螺丝(M3x6)时需先涂上螺丝胶。
Note : Pleasecoated thescrew glue first when screwing down
theflat head srew(M3x6) and the round head screw(M3x6).
提 示：锁平头螺丝（M3x6)和圆头螺丝(M3x6)时需先涂上螺丝胶。
PB-092 Spacer 垫片 Ø5xØ7x0.3