Xenith CHIN CUP User manual

CHIN CUP
INSTALLATION

We design the best protective
gear in football.

IN THIS PACKAGE
1 CHIN CUP + HIGH
CHIN STRAP
1 LOW
CHIN STRAP
4 SNAP
BUCKLES

1
Undo all snap buckles from the
helmet and remove buckles from
the chin straps. Then, pull the chin
cup so it slides o the low
chin straps to remove.
REMOVE THE
EXISTING CHIN CUP
To replace the low strap with a new
one, loop it through the internal suspension
system. Visit Xenith.com for additional help.

With your new chin cup positioned upright
and forward-facing, pull the low chin straps
through the slots of the chin cup, then
through just the rst slot of the snap
buckles in the direction of the arrows.
ATTACH THE NEW
CHIN CUP TO THE
LOW CHIN STRAP2
NOTE:
Do not feed low strap
back through slot.

Feed the end of the high chin strap
under the facemask, then through the
rst slot of the snap buckles in the
direction of the arrows. Adjust the
buckles until the helmet t is secure,
then feed the chin straps through the
second slot of the snap buckle to lock
the t in place.
LOCK YOUR CHIN
CUP INTO PLACE
3

Wear at your own risk. No chin cup can prevent all injuries a player
might receive while participating in football. Failure to follow product
instructions may result in permanent injuries. For football use only.
This chin cup has been tested to be compatible with Xenith helmets
only. Use on any helmet other than Xenith helmets will be at your own
risk. For more information, visit Xenith.com.
© 2018 Xenith, LLC. All rights reserved. XENITH® and ™are trademarks, service marks, or
registered trademarks of Xenith, LLC., in the United States and other countries. Printed in the USA.

XENITH |We design the best protective gear in football.
@XENITH
@XENITHFOOTBALL
FACEBOOK.COM/XENITH
JOIN #TEAMXENITH
XENITH.COM
XENITH CUSTOMER SERVICE
1201 WOODWARD AVE,
5TH FLOOR
DETROIT, MI 48226
[email protected]
866.888.2322