Xerox 8860MFP - Phaser Color Solid Ink User manual

Xerox Phaser 8860 MFP printer
Letter of Volatility
The chart below shows the corresponding memory types for the Xerox Phaser
8860 MFP printer. Please note, there are no remnants of customer print data
retained in the printer when both of the following are true:
(a) The power is turned off
(b) The hard disk drive is removed (from printers with hard drives)
Phaser 8860 MFP
Model Number Memory Size Standard/
Maximum
Memory Type Volatility User
Data
8860 MFP/D 512MB/1GB DDR SDRAM Volatile Yes
All Models 40GB Hard Disk
(Standard) Non-volatile Yes
All models 8K (Head) EEPROM Non-Volatile No***
All models 32 Byte
(Maintenance
kit)
EEPROM Non-Volatile No***
All models 16K(N/W,
Engine) EEPROM Non-Volatile No***
All models 4Mbit/(FPGA) EEPROM Non-Volatile No***
All models 4MB Flash Non-Volatile No***
All models 32K Configuration
Card(EEPROM) Non-Volatile No***
Note:
Flash is used for Firmware code and contains no user data.
*** All EEPROM’s do not contain user print data