Xerox Phaser 3040 User manual

THE INDUSTRY’S
MOST FULLY FEATURED
TWO-ROLL WIDE-FORMAT
COPIER.
XEROX 3040 ENGINEERING COPIER
The right solution.
You shouldn't have to settle for just any engineering copier. You
should have a reprographic solution that's just right for your
specific business needs. The Xerox 3040 Engineering Copier is
convenient, easy to use, and delivers presentation-quality copies.
Productivity-enhancing features.
The 3040 optimizes machine speed. Its two-roll media supply
system automatically switches to the next media roll when the
first is depleted, so jobs can run uninterrupted. That's especially
important when you're copying large jobs or preparing collated
sets for fast-approaching deadlines. And the 3040's control panel
with dual-language message display makes it easy for everyone
to just walk up and start copying.
Top performance from a mid-volume copier.
The 3040 always gives you excellent quality prints, whether
you've programmed a standard job, a partial copy, or a special
format size. The 3040's on-board electronic Auditron ensures
that your copies will always be charged to the correct project or
job. If your print requirements regularly include different media
types and format sizes, the Xerox 3040 is a great choice for you
- a reliable, top-quality selection from the Xerox 3000
engineering copier family.
•Auto media switch
•2 online rolls plus manual bypass
•Presentation quality copies

XEROX 3040 ENGINEERING COPIER
DOCUMENT INPUT
Maximum size 36" x 20' long in single copy mode; 36" x 60"
long in multicopy mode
Minimum size 8 1/2" x 11" (portrait)
Types Opaque, translucent, and
transparent documents
Thickness Up to 1/8" thick
PRODUCTIVITY
Warm-up time Less than 3 minutes from a cold start
First Copy Out Less than 20 seconds D size (24" x 36")
Time (FCOT)
Rated speed 15 linear feet per minute
Copy throughput 3 E size (36" x 48") per minute;
(multiple copy mode) 6 D size (24" x 36") per minute;
8 C size (18" x 24") per minute
Multiple copies Selectable, 1 to 15 copies per document
MEDIA
Type 20 lb. bond, Improved 20 lb. Zero Solvent
vellum, and 4 mil Zero Solvent film
Supply Roll stock selectable from either of two
online feed rolls; each with a capacity
up to 36" x 500' for paper media
(36" x 150' .004 drafting film)
Manual bypass for special media applications
POWER REQUIREMENTS
115 VAC/20 amp dedicated line
PHYSICAL CHARACTERISTICS
Product size Height 58"; Width 57"; Depth 27";
Weight 596 lbs.
KEY FEATURES
• Auto media switch for next available roll when roll in use is depleted.
• On-board electronic Auditron with capacity for 250 individual
accounts in three modes: access control, assigned account,
copy inhibit.
• Interactive dual-language message display communicates status of
copier and instructions for operation and maintenance.
• Two online media feed rolls and manual bypass.
ACCESSORIES
Work Organizer; Long Document Guide; Document Shelf Extension;
Foreign Interface; Document Stacker
XES offers a broad array of media, toner and consumables designed
to work with all brands of wide format equipment.
Product data subject to change without notice.
Xerox®, Auditron®, 3040, the digital box icon
and the acronym XES are trademarks of Xerox
Corporation. ©XESystems, Inc. 2000. 08/00
Printed on recycled paper. All rights reserved.
610P64559
Your nearest XES authorized reseller is:
Come visit us on the World Wide Web
www.XES.com
All of these choices are yours. From Xerox Engineering Systems.
Only Xerox Engineering Systems brings you the power of the Xerox
3000 family of wide-format copiers. The Xerox 3000 engineering
copiers offer the right combination of features, value, and productivity
for engineering reprographics. Our products continue to be the
industry benchmark for reliability, ease of use, and quality copies.