Xerox Phaser 7750 Operator's manual

Phaser® 7750 Color Laser Printer
Copyright © 2004 Xerox Corporation. All Rights Reserved.
4-3
Paper Jams
This topic includes:
■"Jam at Tray 1 (MPT)" on page 4-3
■"Jam at Tray 2" on page 4-6
■"Jam at Tray 3, 4, or 5" on page 4-8
■"Jam at the Fuser" on page 4-11
■"Jam at the Duplex Unit" on page 4-14
■"Jam at Finisher Entrance" on page 4-16
■"Jam at Finisher-Bypass Door G" on page 4-17
■"Jam at Finisher Door H" on page 4-18
For safety information, go to Reference/Troubleshooting/User Safety on the User
Documentation CD-ROM.
Jam at Tray 1 (MPT)
There is a jam at Tray 1 (MPT). Follow these steps to clear the jam.
1. Remove paper from Tray 1 (MPT).
Videos are available with instructions for clearing paper jams. Videos are located
on the User Documentation CD-ROM and at www.xerox.com/office/7750support.
7750-006

Paper Jams
Phaser® 7750 Color Laser Printer
4-4
2. Remove the jammed paper. Confirm that all paper fragments are removed.
3. If you did not find paper in step 2, push up the latch on the left side of the printer to open
Left Door A.
Warning
Use caution. Some components behind Left Door A may be hot.
4. Remove the jammed paper. Confirm that all paper fragments are removed.
7750-007
7750-001
7750-078

Paper Jams
Phaser® 7750 Color Laser Printer
4-5
5. Close Left Door A.
6. Replace the paper in the tray.
Note
Do not load paper above the fill line.
For additional information, go to www.phaserSMART.com.
7750-005
7750-008

Paper Jams
Phaser® 7750 Color Laser Printer
4-6
Jam at Tray 2
There is a jam at Tray 2. Follow these steps to clear the jam.
1. Open Left Door B.
2. Remove the jammed paper. Confirm that all paper fragments are removed.
3. Close Left Door B.
7750-009
7750-010
7750-011

Paper Jams
Phaser® 7750 Color Laser Printer
4-7
4. Pull out Tray 2.
5. Remove jammed paper from the tray.
6. Verify that the paper is loaded correctly in the tray and that the guides are pressed firmly
against the paper.
7750-012
7750-013
7750-016

Paper Jams
Phaser® 7750 Color Laser Printer
4-8
7. Push Tray 2 completely to the back of the printer.
For additional information, go to www.phaserSMART.com.
Jam at Tray 3, 4, or 5
There is a jam at the tray specified on the front panel. Follow these steps to clear the jam.
1. Open Left Door C.
2. Remove the jammed paper. Confirm that all paper fragments are removed.
7750-014
7750-018
7750-019

Paper Jams
Phaser® 7750 Color Laser Printer
4-9
3. Close Left Door C.
4. Pull out the tray specified on the front panel.
7750-021
7750-022

Paper Jams
Phaser® 7750 Color Laser Printer
4-10
5. Remove the crumpled paper from the tray.
Note
If you have a 2500-Sheet High-Capacity Feeder, lift the cover on the let side of the
tray and remove jammed paper.
6. Verify that the paper is loaded correctly in the tray and that the guides are pressed firmly
against the paper.
7750-109
7750-136
7750-113

Paper Jams
Phaser® 7750 Color Laser Printer
4-11
7. Push the tray completely to the back of the printer.
For additional information, go to www.phaserSMART.com.
Jam at the Fuser
There is a jam at the fuser. Follow these steps to clear the jam.
1. Push up the latch on the left side of the printer to open Left Door A.
Warning
Use caution. Some components behind Left Door A may be hot.
7750-023
7750-001

Paper Jams
Phaser® 7750 Color Laser Printer
4-12
2. Lift the green release latch located on the right side of the fuser.
3. Remove the jammed paper. Confirm that all paper fragments are removed.
4. Push down the green release latch.
7750-002
7750-003
7750-004