Xerox Phaser 7750 User manual

Phaser® 7750 Color Laser Printer
Copyright © 2004 Xerox Corporation. All Rights Reserved.
4-32
Maintenance
For safety information, go to Reference/Troubleshooting/User Safety on the User
Documentation CD-ROM.
Your printer needs little maintenance to keep it producing quality prints. Certain routine
maintenance items need to be ordered occasionally:
■Imaging Units
■Fuser
■Transfer Roller
■Waste Cartridge
■Belt Cleaner Assembly
Access the “Supplies Usage Page” from the printer’s front panel, from CentreWare IS, or print
the “Usage Profile” at the printer’s front panel.
Order extra printer supplies when the printer’s front panel displays a warning that the supply is
low or near the end of life. You must replace the supply when the front panel displays an error
message that the supply is empty or at the end of its life.
For information about supplies, go to www.xerox.com/office/7750supplies. Each supply
includes installation instructions.
Cleaning the Outside of the Printer
You can clean the outside of the printer with a soft, damp, cloth. You can use a cloth moistened
with a mild neutral detergent to remove stains; do not spray detergent directly onto the printer.
Warning
To prevent electric shock, turn the printer off and unplug the power cord from the
electrical outlet before cleaning the printer.
Do not use a vacuum cleaner to clean the printer. Do not lubricate the printer with oil.
Videos are available with instructions for printer maintenance. Videos are located
on the User Documentation CD-ROM and at www.xerox.com/office/7750support.