Xiaomi Amazfit Bip S User manual

Amazfit Bip S
User Manual
Contents
Watch Face Functions Navigation and Button Instructions................................. 3
Functions Navigation .............................................................................................. 3
Physical Button Operations................................................................................... 5
Wearing and Charging .................................................................................................... 6
Daily Wearing............................................................................................................ 6
Wearing during Workouts..................................................................................... 6
Charging ..................................................................................................................... 6
Use of Functions................................................................................................................ 8
Device Pairing and Unpairing............................................................................... 8
Watch Face................................................................................................................. 9
Control Center .......................................................................................................... 9
Notifications.............................................................................................................12
Watch App Settings...............................................................................................15
Status .........................................................................................................................15
Heart Rate.................................................................................................................16
PAI...............................................................................................................................17
Workout ....................................................................................................................18
Weather.....................................................................................................................19
Alarm Clock..............................................................................................................20

Timer ..........................................................................................................................21
Compass ...................................................................................................................22
Music..........................................................................................................................23
Settings......................................................................................................................24
Watch Status Alerts ...............................................................................................26
Quick Access Settings ...........................................................................................28
Introduction to the Workout Function .....................................................................28
Start Workouts ........................................................................................................28
Workout in Progress .............................................................................................29
Alerts during Workouts ........................................................................................29
Operations during Workouts..............................................................................31
Pause/Continue/End the Workout ...................................................................33
View Workout Results...........................................................................................34
Delete Historical Workout Records ..................................................................34
Workout Settings ...................................................................................................35
GPS and AGPS.........................................................................................................35
Introduction to Workout Heart Rate Zones...................................................36
Daily Maintenance of the Watch................................................................................37

Watch Face Functions Navigation and Button Instructions
Amazfit Bip S features a touch screen with a reflective display and one physical
button.
Functions Navigation
The screen can be navigated by swiping left/right or up/down.

The watch face page is displayed by default, and you may:
1. Swipe up on the watch face page to view historical message notifications.
2. Swipe down on the watch face page, or swipe down on the edge of any other
page (except the settings page) to enter the control center, where you can set
up Do Not Disturb, screen lock, brightness and music playback on your mobile
phone. You can also check the watch's battery level and connection status.
3. Swipe left on the watch face page to view the function list, where you can tap

the corresponding function to enter its details page.
4. Swipe right on the watch face page to quickly access Music control, Status, PAI,
Heart rate, and Weather.
Physical Button Operations
Short press the physical button once to:
①Unlock the screen.
②Turn off the screen if the watch face page is currently displayed.
③Return to the previous menu level if any other page is currently displayed.
④Scroll up and down on the page during workout.
⑤Unlock the page when swimming.
Long press the watch button to:
①Turn on the watch.
②Quickly start a specific workout.
(Users can set the quick start item in "Settings" - "Long press button settings")
③Pause the workout if you are on the workout page.
④Long press for 10s to reboot the watch.

Wearing and Charging
Daily Wearing
During non-workout hours, it is recommended to wear the watch with a moderate
tightness at a distance two fingers far from your wrist to ensure that the optical
heart rate monitor works properly.
Wearing during Workouts
During workouts or other exercises, it is recommended to wear the watch
comfortably and ensure a tight fit without slipping. Don't be too tight, but don't
allow the watch to move freely either.
Charging
1. Plug the charger's USB connector into a mobile phone charger or a computer
USB port to charge the watch.

2. Place the watch onto the charging base. Be sure to align the metal contacts
on the back of the watch with the golden pins of the charging base, and keep
the watch button pressed firmly against the charging base.
3. After the watch is properly put onto the charging base, the charging icon will
appear on the screen, indicating that the watch is being charged.
During charging, you can view the current time and receive incoming call alerts
and app notifications.
It is recommended to use computer USB ports or mobile phone chargers from a
well-known brand to charge the watch. The charger's rated output voltage should
be 5V, with an output current above 1A.

Use of Functions
Download the Amazfit app via the mobile phone before using Amazfit Bip S. You
need to pair the watch using the Amazfit app to enjoy its full functionality. In
addition, a paired watch allows the saving of data generated on the watch to your
personal account in the cloud.
Device Pairing and Unpairing
1. Please download the Amazfit app through the application stores, and register
or log into your account.
2. Open the app, go to "Profile –Add device –Watch –Amazfit Bip S" and scan
the QR code on the watch. This will quickly pair the device.
1. Once paired, it is usually necessary to perform a system upgrade on the watch.
Please wait while this is happening and keep the phone connected to both the
Internet and the watch via Bluetooth, so as to ensure a successful upgrade.
Before updating your device, please fully charge your device or make sure it
has a 10% battery left and make sure your phone screen is on and do not
perform other operations on your phone during the upgrade
2. After the watch is paired and upgraded, its functions are available. The Amazfit
app can also be used to operate or configure watch functions.
3. If you need to unpair your watch, open the Amazfit app and choose "Unpair"
on the device page.

Watch Face
1. To replace the watch face, either long press the watch face or go to "Settings
→ Watch face settings", swipe left and right to browse through the available
watch faces, and tap the new watch face to complete the replacement.
2. Go to the Watch face settings page. If you see a custom button under the
thumbnail, it means the watch face is editable. Use tapping or swiping to
switch the functions displayed in the currently selected box, which is
highlighted. Tapping in a gray area to make that the currently selected area.
3. To replace the watch face from the app: Tap "Profile –Amazfit Bip S –Watch
face settings" to download more watch faces on the Watch Face Store.
Control Center
Swipe down on the watch face page, or swipe down from the edge of any other
non-watch face page (except the settings page) to enter the control center.

1. Do Not Disturb mode
Tap the Do Not Disturb mode icon to go to the Do Not Disturb settings.
When the Do Not Disturb mode is enabled, the watch won't vibrate when it
receives incoming call alerts, SMS, app notifications, e-mail alerts or nudge alerts.
Select "Auto turn on" and the DND mode is automatically enabled after you go
to sleep wearing the watch.

2. Screen lock
Tap the screen lock icon to enable or disable the screen lock feature.
With the screen lock function on, the watch can only be unlocked and operated
by using the watch button. This can prevent any error caused by unintentional
screen touches. Tap the screen lock icon again to turn ff the screen lock function.
3. Brightness adjustment
Tap the brightness adjustment button to go to the brightness adjustment settings.
Tap the "➕" or "➖" buttons to lighten or dim the screen.
4. Music control

Tap the music icon to enter the music control interface. Via its Bluetooth
connection, the watch can pause or resume music playback on the phone, switch
between songs, and adjust the volume.
①Open the music player on your phone first, and then enable the music function
on the watch.
②If you are using an iOS device, you need to pair and connect the watch with
the Amazfit app
③If you are using an Android device, you need to enable notification reading
permission in the app.
Notes: The compatibility of the Android mobile phone system and the support
available in different music players may to a certain extent affect the music control
capability of the watch.
Notifications
Enable Notifications
To use this, you need to enable the corresponding "App alerts" on the Amazfit
app, and keep the watch and the mobile phone connected.
1. You need to pair the watch with the Bluetooth of the mobile phone before use.
2. If you are using an Android device, you need to include the app into the whitelist
or auto-start list of the mobile phone in settings in order to keep the app running
in the background. This will prevent the app from being detected and killed by

certain processes running in the background, which will close the connection
between the watch and the app, and as a result no reminder will be received. Go
to "Profile" - "Amazfit Bip S" - "Run in the background" to learn how to set this in
different mobile phone OS.
View Notifications
When the watch receives a notification alert, it will vibrate to remind you and
automatically display the notification content. If you do not view the notification
immediately, you may swipe up on the watch face page to check the notification
history.

Delete or Clear Notifications
The watch can hold the last 10 notification messages. When this limit is reached,
the earliest notification will be automatically deleted each time a new notification
is received. If the content of a notification cannot be displayed in one screen, the
second and the third screen will continue to display the remaining content. If there
is still any portion left, it will not be displayed.
1. Swipe left on a notification content page to display the Delete button. Tap it
to delete the notification.

2. Swipe up to the bottom of the notification list to display the Clear button. Tap
it to clear all notifications.
Watch App Settings
Watch app refers to various functions that can be used independently on the
watch, such as Status and Workout
By default, the apps are displayed in the order shown in the following figure. You
can customize the app displayed on the screen based on your personal
preferences. To do this, open the Amazfit app and tap "Profile" -> "Amazfit Bip
S" -> "Watch app settings" and select the app that you wish to display.
Status
In the status details page, you can view today's number of steps updated in real-
time, heart rate measured in the last minute, distance traveled, calories burned,
and idle alerts.

Heart Rate
1. The watch will start heart rate measurement automatically once the heart rate
details page is opened. During measurement, it's required to properly wear
the watch and keep the back of the watch fairly close to your skin until the
watch can measure a stable heart rate.
2. If you want to turn on the all-day measurement function, open the Amazfit
app, go to "Profile –Amazfit Bip S –Heart Rate Measurement" and choose to

turn on the all-day measurement function.
Notes: With the all-day measurement function on, the watch will regularly
measure your heart rate.
PAI
1. Open the PAI details page to view the current PAI score and the PAI range in
which this score is located.
2. Swipe up on the PAI details page to view the PAI trends for the last seven days.
3. Open the PAI page in the Amazfit app to learn more about PAI.

Note: To use the PAI function, you need to enable all-day measurement by
opening the Amazfit app, go to "Profile –Amazfit Bip S –Heart rate detection",
and choose to enable all-day measurement.
Workout
Amazfit supports ten workout modes: outdoor running, indoor running, outdoor
cycling, walking, open water swimming, and pool swimming etc. See the
"Workout" section to learn more about the functions available under different
workout modes.

Weather
On the weather page, you can view the weather for the current and next few days.
The weather displayed by the watch comes from updates pushed by the mobile
phone. Therefore, you need to keep the Bluetooth connection between your
mobile phone and the watch active in order to receive the latest weather updates.
In addition, when a weather alert is received, the watch will receive the alert as
well. You may toggle the weather alert on and off in "Profile" -> "Amazfit Bip S"
-> "Weather settings" on the Amazfit app.

Alarm Clock
You can turn on or off the alarm directly on the watch screen, and add and edit
alarms via the Amazfit app. You can set up to 10 alarms on your watch.