Xiaomi Mi Band 6 User manual

Xiaomi Mi Band 6 User Manual

Read this manual carefully before use, and retain it for future
reference.
Product Overview

Installation
1. Insert one end of the fitness tracker into the slot from the front
of the wristband.
2. ress down on the other end with your thumb to push the fitness
tracker completely into the slot.

Wearing
1. Comfortably Tighten the band around your wrist about 1 finger
width away from your wrist bone.
2. To achieve the optimal performance of the heart rate sensor,
make sure its back to contact with your skin. When wearing your
wristband, keep it neither too tight nor too loose but leaving
some space for the skin to be able to breath. Tighten the
wristband before your start to exercise and properly loose it
afterward.

Connecting
1. Scan the QR code to download and install the latest version of
the Mi Fit app, or search for it in Google lay App Store or other
third party app stores.
2. Log into your Mi account in the Mi Fit app and follow the
instructions to conncet and pair the band with your phone. Once
the band vibrates and a pairing request is displayed on its
screen, tap the touch button to complete the pairing with your
phone. Note: Make sure the Bluetooth on your phone is enabled.
Hold the phone and the band close to each other during pairing.

Usage
After successfully pairing with your device, the band will start tracking
and analyzing your daily activities and sleeping habits.
Touch the button to light up the screen. Swipe up or down to view
various functions such as exercise data and heart rate measurements.
Swiper right to return to previous page.

Open NFC Bus Card
Use the App to connect the device, you can select the NFC bus card
that needs to be activated. You will be prompted that the card is
successfully activated. You can use your wristband to swipe your card
to take the bus or subway. When swiping the card, please keep the
wristband close to the middle of the swiping area.

Xiao AI Assistant
Xiao AI is an artificial intelligence assistant under Xiaomi, dedicated to
providing users with innovative intelligent voice service experience.
Swipe to the right on the watch face page to wake-up Xiao AI.
After waking up Xiao AI on the bracelet, you can use Xiao AI to query
encyclopedia and check weather settings. Set a clock to remotely
control smart devices at home etc. For more functions, please refer to
the app connected to the mobile phone.
Reminder: If you want to use the smart voice service of Xiao AI you
need to keep the bracelet connected to the app and app can use
network services.

Dissassem ly
Remore the band from your wrist, hold on to each and and pull on the
wristband until you see a small gap between the fitness tracker and
wristband. Use your finger to pop the fitness tracker out of its slot
from the front side of the wristband.

Charging
Recharge your band immediately when the battery level is low.

Precautions
When choosing to measure your hear rate, keep your wrist still during
measurement,
The waterproof level of the Mi Band 6 NFC version of the bracelet is 5
ATM which can be used in hand washing, swimming in pools and
shallow beaches. Wear it when swimming, but not suitable for hot
water, saunas and diving.
The touch screen of the bracelet does not support underwater
operation. When the bracelet is wet please clean the surface with tap
water, do operation after it dry.
Avoid wearing your hands too lightly during use. lease keep the
charging contact part of the bracelet dry and set. Use clean water to
cleanse the wrist watch. If you have symptoms such as redness and
swelling on the contact are, please stop using it immediately and
consult a doctor.
The device is not a medical device and nay data/information provided
by the product should not be used for diagnosis or treatment, and
basis for disease prevention.
If you use a power adapter to charge, you should use a power
adapter that meets the requirements with corresponding safety
standards. Or use a CCC-certified power adapter.

Specifications
roduct Name: Mi Band 6 NFC
roduct Model: XMSH16HM
Cell TYpe: Builtin iON polymer battery
Weight:13.0 g
Body Size: 474 x 18.6 x 12.7 mm
Wristband Material: Thermoplastic elastomer (T E)
Buckle Material:Aluminum Alloy
Standard: QHMO1-2020
Supported System: Android 5.0 and above, iOS 10.0 and above
CMIT ID:2021D O45
Battery Capacity: 125 mAh
Input Voltage: DC50V
Input Current: 250mAMAX
Waterproof Grade: 5 ATM
Working Temperature: Operating Temperature: 0°C to 45°C