Xiaomi Mi Smart Band 4 User manual

Mi Smart Band 4 User Manual
This version is for private use only and should not be distributed.

1
Read this manual carefully before use, and retain it for future reference.
01 Product Overview
02 Installation
Wristband Charging Cable
Fitness Tracker
Touchscreen
Heart Rate Sensor
Charging Port
Touch Buon
1. Insert one end of the fitness tracker into the slot from the front of the wristband.
2. Press down on the other end with your thumb to push the fitness tracker completely
into the slot.
This version is for private use only and should not be distributed.

2
03 Wearing
Comfortably tighten the band around your wrist, about 1 finger width away from your wrist
bone.
Note: Wearing the wristband too loosely may impact the data collection by the heart rate
sensor.
Mi Fit
Mi Fit app QR code
(Android 4.4 & iOS 9.0 or above)
04 Connecting
1. Scan the QR code to download and install the latest version of the Mi Fit app, or search
for it in Google Play, App Store, or other third-party app stores.
This version is for private use only and should not be distributed.

3
Pair the
phone
Pair the phone
Band hasn't received pairing request
Confirm on the band
2. Open the Mi Fit app, log in to your account, and then follow the instructions to connect
and pair the band with your device. When your band starts to vibrate and the Bluetooth
pairing notification appears on the screen, touch the buon to complete the pairing
with your device.
Note: Make sure the Bluetooth is enabled on your phone. Hold close your phone to the
band during the pairing process.
05 Usage
Swipe up/down to switch
between functions
Swipe right to return to
the previous page
Aer successfully pairing with your device, the band will start tracking and analyzing your
daily activities and sleeping habits.
Touch the buon to light up the screen. Then, you can swipe up or down to access many
features including browsing your activity data, and measuring your heart rate.
This version is for private use only and should not be distributed.

4
06 Disassembly
07 Charging
Remove the band from your wrist, hold on to each end and pull on the wristband until you
see a small gap between the fitness tracker and the wristband. Use your finger to pop the
fitness tracker out of its slot from the front side of the wristband.
Recharge your band immediately when the baery level is low.
This version is for private use only and should not be distributed.

5
09 Specifications
08 Precautions
When using the band to measure your heart rate, please keep your wrist still.
Mi Smart Band 4 has a water resistance rating of 5 ATM. It can be worn in the shower,
swimming pool, or while swimming near the shore. It cannot be used, however, in a
sauna or while scuba diving.
The function of the touch buon and touchscreen are not accessible during
underwater. When your band comes in contact with water, use a so cloth to wipe away
excess water from its surface before using it.
During daily use, avoid wearing the band too tightly and try to keep its contact area dry.
Please clean the wristband regularly with water. Please stop using the product
immediately and seek medical assistance if the contact area on your skin shows signs
of redness or swelling.
Name: Mi Smart Band 4
Model: XMSH07HM
Fitness Tracker Net Weight: 10.6 g
Fitness Tracker Dimensions: 46.8 x 17.8 x 12.6 mm
Wristband Material: Thermoplastic elastomer (TPE)
Clasp Material: Aluminum alloy
Adjustable Length: 155–216 mm
Compatible with: Android 4.4/iOS 9.0 or above
Baery Capacity: 135 mAh
Baery Type: Lithium polymer baery
Input Voltage: DC 5.0 V
Input Current: 250 mA Max.
IP Rating: 5 ATM
Frequency: 2402–2480 Mhz
Max. Output: 0 dBm
Operating Temperature: -10°C to 50°C
Wireless Connectivity: Bluetooth 5.0 BLE
This version is for private use only and should not be distributed.

6
10 Disposal and Recycling Information
11 Certifications and Safety Approvals
All products bearing this symbol are waste electrical and electronic equipment
(WEEE as in directive 2012/19/EU) which should not be mixed with unsorted
household waste. Instead, you should protect human health and the
environment by handing over your waste equipment to a designated collection
point for the recycling of waste electrical and electronic equipment, appointed
by the government or local authorities. Correct disposal and recycling will help
prevent potential negative consequences to the environment and human
health. Please contact the installer or local authorities for more information
about the location as well as terms and conditions of such collection points.
Hereby, Anhui Huami Information Technology Co., Ltd., declares that the radio
equipment type XMSH07HM is in compliance with Directive 2014/53/EU. The
full text of the EU declaration of conformity is available at the following
internet address:
hp://www.mi.com/global/service/support/declaration.html
For regulatory information, product certification, and compliance logos
related to the Mi Smart Band 4, please go to More > Seings > Regulatory.
Manufactured for: Xiaomi Communications Co., Ltd.
Manufactured by: Anhui Huami Information Technology Co., Ltd.
(a Mi Ecosystem company)
Address: Room 1201, Building A4, National Animation Industry Base, No. 800
Wangiang West Road, Gaoxin District, Hefei, Anhui, China
For further information, please go to www.mi.com
This version is for private use only and should not be distributed.

7
As a Xiaomi consumer, you benefit under certain conditions from additional warranties.
Xiaomi offers specific consumer warranty benefits which are in addition to, and not
instead of, any legal warranties provided by your national consumer law. The duration and
conditions related to the legal warranties are provided by respective local laws. For more
information about the consumer warranty benefits, please refer to Xiaomi's official
website hps://www.mi.com/en/service/warranty/. Except as prohibited by laws or
otherwise promised by Xiaomi, the aer-sales services shall be limited to the country or
region of the original purchase. Under the consumer warranty, to the fullest extent
permied by law, Xiaomi will, at its discretion, repair, replace or refund your product.
Normal wear and tear, force majeure, abuse or damage caused by the user's negligence or
fault are not warranted. The contact person for the aer-sale service may be any person in
Xiaomi's authorized service network, Xiaomi's authorized distributors or the final vendor
who sold the products to you. If in doubt please contact the relevant person as Xiaomi
may identify.
The present warranties do not apply in Hong Kong and Taiwan.
Products which were not duly imported and/or were not duly manufactured by Xiaomi
and/or were not duly acquired from Xiaomi or a Xiaomi’s official seller are not covered by
the present warranties. As per applicable law you may benefit from warranties from the
non-official retailer who sold the product. Therefore, Xiaomi invites you to contact the
retailer from whom you purchased the product.
This version is for private use only and should not be distributed.