manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. Xray
  6. •
  7. Motorized Toy Car
  8. •
  9. Xray X1 User manual

Xray X1 User manual

Other manuals for X1

3

Other Xray Motorized Toy Car manuals

Xray T1 EVO2 User manual

Xray

Xray T1 EVO2 User manual

Xray Nitro Micro NT18MT User manual

Xray

Xray Nitro Micro NT18MT User manual

Xray X12'21 User manual

Xray

Xray X12'21 User manual

Xray X12 User manual

Xray

Xray X12 User manual

Xray NT1 User manual

Xray

Xray NT1 User manual

Xray XT4 User manual

Xray

Xray XT4 User manual

Xray XT8 User manual

Xray

Xray XT8 User manual

Xray X1 2019 User manual

Xray

Xray X1 2019 User manual

Xray X12 User manual

Xray

Xray X12 User manual

Xray GTX8 User manual

Xray

Xray GTX8 User manual

Xray XB4C 23 User manual

Xray

Xray XB4C 23 User manual

Xray T3 2011 User manual

Xray

Xray T3 2011 User manual

Xray XB8 Series User manual

Xray

Xray XB8 Series User manual

Xray GTX8 User manual

Xray

Xray GTX8 User manual

Xray NT1 Product guide

Xray

Xray NT1 Product guide

Xray XB4 User manual

Xray

Xray XB4 User manual

Xray XB4 User manual

Xray

Xray XB4 User manual

Xray SCX User manual

Xray

Xray SCX User manual

Xray T4 2018 User manual

Xray

Xray T4 2018 User manual

Xray XB2 Series User manual

Xray

Xray XB2 Series User manual

Xray T2008 User manual

Xray

Xray T2008 User manual

Xray T4F User manual

Xray

Xray T4F User manual

Xray XB4 User manual

Xray

Xray XB4 User manual

Xray T4 User manual

Xray

Xray T4 User manual

Popular Motorized Toy Car manuals by other brands

Reely Dune Fighter 3S operating instructions

Reely

Reely Dune Fighter 3S operating instructions

REVELL 1970 Chevelle SS 454 manual

REVELL

REVELL 1970 Chevelle SS 454 manual

Team Losi Micro Rally Car Operation guide

Team Losi

Team Losi Micro Rally Car Operation guide

Jamara Mercedes-AMG GLE 63 Instruction

Jamara

Jamara Mercedes-AMG GLE 63 Instruction

Eduard Humber Scout Car Mk.I exterior quick start guide

Eduard

Eduard Humber Scout Car Mk.I exterior quick start guide

Jamara VW T1 Bus Instruction

Jamara

Jamara VW T1 Bus Instruction

REVELL 68 CHEVY CHEVELLE SS 396 manual

REVELL

REVELL 68 CHEVY CHEVELLE SS 396 manual

Schumacher Pro Cat instruction manual

Schumacher

Schumacher Pro Cat instruction manual

Tamiya TT-01 TYPE E instruction manual

Tamiya

Tamiya TT-01 TYPE E instruction manual

Eduard Krupp Protze 6x4 1/48 quick start guide

Eduard

Eduard Krupp Protze 6x4 1/48 quick start guide

New Bright 61072UEP quick start guide

New Bright

New Bright 61072UEP quick start guide

Team Durango DEX410v5 manual

Team Durango

Team Durango DEX410v5 manual

Jamara Mercedes Actros Muldenkipper 2,4 GHz Instruction

Jamara

Jamara Mercedes Actros Muldenkipper 2,4 GHz Instruction

PLAYMOBIL 9536 manual

PLAYMOBIL

PLAYMOBIL 9536 manual

Atomic BZ3 instruction manual

Atomic

Atomic BZ3 instruction manual

Jamara McLaren Senna 2,4GHz instructions

Jamara

Jamara McLaren Senna 2,4GHz instructions

Aiyaplay 370-290V00 user manual

Aiyaplay

Aiyaplay 370-290V00 user manual

ZEROTRIBE Zetricks ZT1144 instruction manual

ZEROTRIBE

ZEROTRIBE Zetricks ZT1144 instruction manual

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.

2
BEFORE YOU START
This is a high-competition, high-quality RC car intended for persons aged 16
years and older with previous experience building and operating RC model
racing cars. This is not a toy; it is a precision racing model. This model racing
car is not intended for use by beginners, inexperienced customers, or by
children without direct supervision of a responsible, knowledgeable adult. If
you do not fulfill these requirements, please return the kit in unused and
unassembled form back to the shop where you have purchased it.
Before building and operating your XRAY, YOU MUST read through all of the
operating instructions and instruction manual and fully understand them to
get the maximum enjoyment and prevent unnecessary damage.
Read carefully and fully understand the instructions before beginning assembly.
Make sure you review this entire manual, download and use set-up book from
the web, and examine all details carefully. If for some reason you decide this is
not what you wanted or expected, do not continue any further. Your hobby dealer
can not accept your kit for return or exchange after it has been partially or fully
assembled.
Contents of the box may differ from pictures. In line with our policy of continuous
product development, the exact specifications of the kit may vary without prior
notice.
SAFETY PRECAUTIONS
Contains:
LEAD (CAS 7439-92-1) ANTIMONY (CAS 7440-36-0)
WARNING: This product contains a chemical known to the state of California
to cause cancer and birth defects or other reproductive harm.
CAUTION: CANCER HAZARD
Contains lead, a listed carcinogen. Lead is harmful if ingested. Wash
thoroughly after using. DO NOT use product while eating, drinking or using
tobacco products. May cause chronic effects to gastrointestinal tract, CNS,
kidneys, and blood. MAY CAUSE BIRTH DEFECTS.
When building, using and/or operating this model always wear protective
glasses and gloves.
Take appropriate safety precautions prior to operating this model. You are
responsible for this model‘s assembly and safe operation! Please read the
instruction manual before building and operating this model and follow all
safety precautions. Always keep the instruction manual at hand for quick
reference, even after completing the assembly. Use only genuine and original
authentic XRAY parts for maximum performance. Using any third party parts
on this model will void guaranty immediately.
Improper operation may cause personal and/or property damage. XRAY
and its distributors have no control over damage resulting from shipping,
improper construction, or improper usage. XRAY assumes and accepts no
responsibility for personal and/or property damages resulting from the use
of improper building materials, equipment and operations. By purchasing
any item produced by XRAY, the buyer expressly warrants that he/she is in
compliance with all applicable federal, state and local laws and regulation
regarding the purchase, ownership and use of the item. The buyer expressly
agrees to indemnify and hold harmless XRAY for all claims resulting directly
or indirectly from the purchase, ownership or use of the product. By the act
of assembling or operating this product, the user accepts all resulting liability.
If the buyer is not prepared to accept this liability, then he/she should return
this kit in new, unassembled, and unused condition to the place of purchase.
IMPORTANT NOTES – GENERAL
• This product is not suitable for children under 16 years of age without the
direct supervision of a responsible and knowledgeable adult.
• Carefully read all manufacturers warnings and cautions for any parts used
in the construction and use of your model.
• Assemble this kit only in places away from the reach of very small children.
• First-time builders and users should seek advice from people who have
building experience in order to assemble the model correctly and to allow
the model to reach its performance potential.
• Exercise care when using tools and sharp instruments.
• Take care when building, as some parts may have sharp edges.
• Keep small parts out of reach of small children. Children must not be
allowed to put any parts in their mouth, or pull vinyl bag over their head.
• Read and follow instructions supplied with paints and/or cement, if used
(not included in kit).
• Immediately after using your model, do NOT touch equipment on the
model such as the motor and speed controller, because they generate high
temperatures. You may seriously burn yourself seriously touching them.
• Follow the operating instructions for the radio equipment at all times.
• Do not put fingers or any objects inside rotating and moving parts, as this
may cause damage or serious injury as your finger, hair, clothes, etc. may
get caught.
• Be sure that your operating frequency is clear before turning on or running
your model, and never share the same frequency with somebody else at the
same time. Ensure that others are aware of the operating frequency you
are using and when you are using it.
• Use a transmitter designed for ground use with RC cars. Make sure that no
one else is using the same frequency as yours in your operating area. Using
the same frequency at the same time, whether it is driving, flying or sailing,
can cause loss of control of the RC model, resulting in a serious accident.
• Always turn on your transmitter before you turn on the receiver in the car.
Always turn off the receiver before turning your transmitter off.
• Keep the wheels of the model off the ground when checking the operation
of the radio equipment.
• Disconnect the battery pack before storing your model.
• When learning to operate your model, go to an area that has no obstacles
that can damage your model if your model suffers a collision.
• Remove any sand, mud, dirt, grass or water before putting your model
away.
• If the model behaves strangely, immediately stop the model, check and
clear the problem.
• To prevent any serious personal injury and/or damage to property, be
responsible when operating all remote controlled models.
• The model car is not intended for use on public places and roads or areas
where its operation can conflict with or disrupt pedestrian or vehicular traffic.
• Because the model car is controlled by radio, it is subject to radio
interference from many sources that are beyond your control. Since radio
interference can cause momentary loss of control, always allow a safety
margin in all directions around the model in order to prevent collisions.
• Do not use your model:
- Near real cars, animals, or people that are unaware that an RC car is being
driven.
- In places where children and people gather
- In residential districts and parks
- In limited indoor spaces
- In wet conditions
- In the street
- In areas where loud noises can disturb others, such as hospitals and
residential areas.
- At night or anytime your line of sight to the model may be obstructed or
impaired in any way.
To prevent any serious personal injury and/or damage to property, please be
responsible when operating all remote controlled models.
CUSTOMER SUPPORT
XRAY Europe
K Vystavisku 6992
91101 Trenčín
Slovakia, EUROPE
Phone: 421-32-7401100
Fax: 421-32-7401109
E-mail: info@teamxray.com
We have made every effort to make these instructions as easy to understand as
possible. However, if you have any difficulties, problems, or questions, please do not
hesitate to contact the XRAY support team at info@teamxray.com. Also, please visit
our Web site at www.teamxray.com to find the latest updates, set-up information,
option parts, and many other goodies. We pride ourselves on taking excellent care
of our customers.
You can join thousands of XRAY fans and enthusiasts in our online community at:
www.teamxray.com
XRAY USA
RC America, 2030 Century Center Blvd #15
Irving, TX 75062
USA
Phone: (214) 744-2400
Fax: (214) 744-2401
E-mail: [email protected]
FAILURE TO FOLLOW THESE INSTRUCTIONS WILL BE CONSIDERED AS ABUSE AND/OR NEGLECT.
3
IMPORTANT NOTES – ELECTRICAL
• Insulate any exposed electrical wiring (using heat shrink tubing or electrical
tape) to prevent dangerous short circuits. Take maximum care in wiring,
connecting and insulating cables. Make sure cables are always connected
securely. Check connectors for if they become loose. And if so, reconnect
them securely. Never use RC models with damaged wires. A damaged wire
is extremely dangerous, and can cause short-circuits resulting in fire. Please
have wires repaired at your local hobby shop.
• Low battery power will result in loss of control. Loss of control can occur due
to a weak battery in either the transmitter or the receiver. Weak running
battery may also result in an out of control car if your car‘s receiver power is
supplied by the running battery. Stop operation immediately if the car starts
to slow down.
• When not using RC model, always disconnect and remove battery.
• Do not disassemble battery or cut battery cables. If the running battery
short-circuits, approximately 300W of electricity can be discharged, leading
to fire or burns. Never disassemble battery or cut battery cables.
• Use a recommended charger for the receiver and transmitter batteries
and follow the instructions correctly. Over-charging, incorrect charging,
or using inferior chargers can cause the batteries to become dangerously
hot. Recharge battery when necessary. Continual recharging may damage
battery and, in the worst case, could build up heat leading to fire. If battery
becomes extremely hot during recharging, please ask your local hobby
shop for check and/or repair and/or replacement.
• Regularly check the charger for potential hazards such as damage to the
cable, plug, casing or other defects. Ensure that any damage is rectified
before using the charger again. Modifying the charger may cause short-
circuit or overcharging leading to a serious accident. Therefore do not
modify the charger.
• Always unplug charger when recharging is finished.
• Do not recharge battery while battery is still warm. After use, battery retains
heat. Wait until it cools down before charging.
• Do not allow any metal part to short circuit the receiver batteries or other
electrical/electronic device on the model.
• Immediately stop running if your RC model gets wet as may cause short
circuit.
• Please dispose of batteries responsibly. Never put batteries into fire.
WARRANTY
XRAY guarantees this model kit to be free from defects in both material and
workmanship within 30 days of purchase. The total monetary value under
warranty will in no case exceed the cost of the original kit purchased. This
warranty does not cover any components damaged by use or modification
or as a result of wear. Part or parts missing from this kit must be reported
within 30 days of purchase. No part or parts will be sent under warranty
without proof of purchase. Should you find a defective or missing part, contact
the local distributor. Service and customer support will be provided through
local hobby store where you have purchased the kit, therefore make sure to
purchase any XRAY products at your local hobby store. This model racing car
is considered to be a high-performance racing vehicle. As such this vehicle
will be used in an extreme range of conditions and situations, all which may
cause premature wear or failure of any component. XRAY has no control over
usage of vehicles once they leave the dealer, therefore XRAY can only offer
warranty against all manufacturer‘s defects in materials, workmanship, and
assembly at point of sale and before use. No warranties are expressed or
implied that cover damage caused by what is considered normal use, or cover
or imply how long any model cars‘ components or electronic components will
last before requiring replacement.
Due to the high performance level of this model car you will need to
periodically maintain and replace consumable components. Any and all
warranty coverage will not cover replacement of any part or component
damaged by neglect, abuse, or improper or unreasonable use. This includes
but is not limited to damage from crashing, chemical and/or water damage,
excessive moisture, improper or no maintenance, or user modifications which
compromise the integrity of components. Warranty will not cover components
that are considered consumable on RC vehicles. XRAY does not pay nor refund
shipping on any component sent to XRAY or its distributors for warranty. XRAY
reserves the right to make the final determination of the warranty status of
any component or part.
Limitations of Liability
XRAY makes no other warranties expressed or implied. XRAY shall not be liable
for any loss, injury or damages, whether direct, indirect, special, incidental,
or consequential, arising from the use, misuse, or abuse of this product and/
or any product or accessory required to operate this product. In no case shall
XRAY‘s liability excess the monetary value of this product.
Take adequate safety precautions prior to operating this model. You
are responsible for this model’s assembly and safe operation.
Disregard of the any of the above cautions may lead to accidents,
personal injury, or property damage. XRAY MODEL RACING CARS
assumes no responsibility for any injury, damage, or misuse of this
product during assembly or operation, nor any addictions that may
arise from the use of this product.
All rights reserved.
QUALITY CERTIFICATE
XRAY MODEL RACING CARS uses only the highest quality materials, the
best compounds for molded parts and the most sophisticated manufacturing
processes of TQM (Total Quality Management). We guarantee that all parts
of a newly-purchased kit are manufactured with the highest regard to quality.
However, due to the many factors inherent in model racecar competition, we
cannot guarantee any parts once you start racing the car. Products which have
been worn out, abused, neglected or improperly operated will not be covered
under warranty.
We wish you enjoyment of this high-quality and high-performance RC car and
wish you best success on the track!
In line with our policy of continuous product development, the exact specifications of the kit may
vary. In the unlikely event of any problems with your new kit, you should contact the model shop
where you purchased it, quoting the part number.
We do reserve all rights to change any specification without prior notice. All rights reserved.
R/C & BUILDING TIPS
• Make sure all fasteners are properly tightened. Check them periodically.
• Make sure that chassis screws do not protrude from the chassis.
• For the best performance, it is very important that great care is taken to
ensure the free movement of all parts.
• Clean all ball-bearings so they move very easily and freely.
• Tap or pre-thread the plastic parts when threading screws.
• Self-tapping screws cut threads into the parts when being tightened. Do
not use excessive force when tightening the self-tapping screws because
you may strip out the thread in the plastic. We recommended you stop
tightening a screw when you feel some resistance.
• Ask your local hobby shop for any advice.
Please support your local hobby shop. We at XRAY Model Racing Cars support
all local hobby dealers. Therefore we ask you, if at all possible, to purchase
XRAY products at your hobby dealer and give them your support like we do.
If you have difficulty finding XRAY products, please check out www.teamxray.
com to get advice, or contact us via email at info@teamxray.com, or contact
the XRAY distributor in your country.
4
ALSO REQUIRED
INCLUDED
(HUDY #106211)
Differential Grease
Transmitter Steering ServoReceiver
Lexan™ Paint
Battery Charger
Speed Controller
LiPo BatteryElectric Motor Pinion Gear
with Setscrew
Double-sided Tape
(HUDY #107875)
OILOIL
Bearing Oil
(HUDY #106230)
OIL
600cSt (#106360)
HUDY Premium Silicone Oils
* Kit includes smaller but sufficient amount
of oil and grease to build the car.
30.000cSt (#106530)
HUDY Premium Silicone Oils
TOOLS REQUIRED
Allen 1.5mm (#111545 - HUDY EXCLUSIVE Limited Edition)
Allen 2.0mm (#112045 - HUDY EXCLUSIVE Limited Edition)
Allen 2.5mm (#112545 - HUDY EXCLUSIVE Limited Edition)
Socket 5.5mm (#175535 - HUDY EXCLUSIVE Limited Edition)
Arm Reamer 4.0mm (#107644 - HUDY EXCLUSIVE Limited Edition)
Reamer (#107602 - HUDY EXCLUSIVE Limited Edition)
Turnbuckle Wrench 4mm (HUDY #181040)
Special Tool for Turnbuckles, Nuts (HUDY #181090)
Pocket Hobby Knife (HUDY #188981)
Scissors (HUDY #188990)
Side Cutters
(HUDY #189010)
Combination Pliers
(HUDY #189020)
Professional Multi-Tool (HUDY #183011)
Allen 3.0mm (#113045- HUDY EXCLUSIVE Limited Edition)
Socket 7.0mm (#177035 - HUDY EXCLUSIVE Limited Edition)
Wheels & Tires & Inserts
(HUDY #803070 & #803080)
5
At the beginning of each section is an exploded view of the parts to be assembled.
There is also a list of all the parts and part numbers that are related to the assembly
of that section.
The part descriptions are color-coded to make it easier for you to identify the source of
a part. Here are what the different colors mean:
STYLE A - indicates parts that are included in the bag marked for the section.
STYLE B - indicates parts that are included in the box.
STYLE C - indicates parts that are already assembled from previous steps.
COLOR INDICATIONS
371026
374901
372127
NOT INCLUDED
XRAY offers wide range of OPTIONAL TUNING PARTS
which are listed in a table like this. Please refer to
the exploded view of each main section to verify
which part is included in the kit while all other parts
are available only as an optional parts and must be
purchased separately.
SAMPLE OF OPTIONAL PARTS
#37XXXX TYPE1 OPTION 1
#37XXXX TYPE2 OPTION 2
#37XXXX TYPE3 INCLUDED
The European Champion and XRAY factory team
driver Jan Ratheisky shares his pro tips and tricks.
Jan Ratheisky
(Factory Driver)
GRAPHITE PARTS PROTECTION
To protect and seal edges of graphite parts, sand edges smooth and then apply CA glue.
Make it: this for chassis edges and countersunk holes.
CA
CA
CA
CA
Apply only a bit of CA glue in the countersunk holes.
IMPORTANT
DETAIL
Fine sandpaper
Use fine sandpaper to sand smooth
the edges of all graphite parts.
DETAIL
6
372650372650
303125
303123
303123
303123
372213
902306
376234
960030
902306
902308 903308
376364-K
372320
372127
376260-K
372320
372320
373241
371026
965019
303454
902303
901303
303432-K
372481
981210
372410-K
376366-K
372649
373241
372290
372290
962030
362648
372213
373242
372290
372321
902310
371067
371066
372089
376262-K
903308
901308
970050
970050
970050
372135
373243
333452
902310
901303
970050
372320
372286
372662
378140
378152
903414
371201
372290
372290
901304
375221
372177
965019
372213
902306
1. FRONT SUSPENSION
BAG
372321
#371027
GRAPHITE CHASSIS - HARD - 2.5mm
903308
903306
371291
303432-K
372410-K
901303
371320
371320
930407
902303
376366-K
372649
303123 ALU SHIM 3x6x2.0mm (10)
303125 ALU SHIM 3x6x3.0mm (10)
303432-K ALU ANTI-ROLL BAR BUSHING - BLACK (2)
333452 ALU ANTI-ROLL BAR PIVOT BALL 4.9mm (2)
362648 BALL END 4.9mm WITH THREAD 4mm (2)
371066 GRAPHITE ARM MOUNT PLATE - NARROW TRACK-WIDTH - 2.5mm
371067 GRAPHITE ARM MOUNT PLATE - WIDE TRACK-WIDTH - 2.5mm
371291 X1 ALU BALL-BEARING ANTI-ROLL BAR HOLDER PLATE - BLACK
371320 COMPOSITE BODY POST (2)
372089 GRAPHITE FRONT ARM BRACE 2.5mm
372127 X1’21 GRAPHITE LOWER SUSPENSION ARM 2.5mm
372135 X1’21 GRAPHITE UPPER SUSPENSION ARM 2.5mm
372177 FRONT COIL SPRING 3.6x6x0.5mm; C=3.5 - GOLD (2)
372213 COMPOSITE STEERING BLOCK & BACKSTOPS
372286 X1’21 KING PIN (2)
372290 ALU SHIM 3.2x4.8x0.5 (4)
372320 COMPOSITE ARM BUSHING (4)
372321 COMPOSITE CASTER & CAMBER BUSHING (2+2+2+2)
372410-K ALU BALL-BEARING ANTI-ROLL BAR HOLDER - BLACK
372481 ANTI-ROLL BAR - FRONT 1.1mm
372649 BALL END 4.2MM WITH 4MM THREAD (2)
372662 COMPOSITE BALL-JOINT 4.2 MM (4)
373241 COMPOSITE PIVOTBALL UNIVERSAL 6.0mm (2)
373242 COMPOSITE PIVOTBALL UNIVERSAL 6.0mm - SHORT (2)
373243 BALL END 6.0mm WITH THREAD 4mm (2)
375221 FRONT WHEEL AXLE - HUDY SPRING STEEL™ (2)
376234 GRAPHITE TOP DECK 2.5mm
376260-K ALU SERVO MOUNT - BLACK
376262-K ALU FRONT STAND - BLACK
376364-K ALU MOUNT 10.8mm - BLACK (2)
376366-K ALU MOUNT 6.0MM - BLACK (2)
378140 SIDE LINKAGE TUBE (2)
378152 COMPOSITE SIDE TUBE SHAFT (2)
901303 HEX SCREW SB M3x3mm (10)
901304 HEX SCREW SB M3x4mm (10)
901308 HEX SCREW SB M3x8mm (10)
902303 HEX SCREW SH M3x4 SMALL HEAD - STAINLESS (10)
902306 HEX SCREW SH M3x6mm (10)
902308 HEX SCREW SH M3x8mm (10)
902310 HEX SCREW SH M3x10mm (10)
903306 HEX SCREW SFH M3x6mm (10)
903308 HEX SCREW SFH M3x8mm (10)
903414 HEX SCREW SFH M4x14mm (10)
930407 BALL-BEARING 4x7x2.5 STEEL SEALED - OIL (2)
960030 NUT M3 (10)
962030 WASHER S 3x6x0.3mm (10)
965019 E-CLIP 1.9 (10)
970050 O-RING 5x1mm (10)
981210 PIN 2x10 (10)
371026 X1’21 GRAPHITE CHASSIS 2.5mm
371201 X1 COMPOSITE FRONT BUMPER
7
970050
O 5x1
970050
O 5x1
901308
SB M3x8
902303
SH M3x4
1.5 mm
UPPER ARMS
UPPER ARMS
LOWER ARMS
2x
INITIAL SETTING
2.0 mm
NOTE ORIENTATION
DETAIL
Professional Multi-Tool
(HUDY #183011)
INITIAL SETTING
6x
2x
2x
2x
2x 2x
1. FRONT SUSPENSION
5mm
COMPOSITE BALL
6.0mm
BALL END
SHORT COMPOSITE BALL
CUTAWAY VIEW
DETAIL
CUTAWAY VIEW
DETAIL
Remove excess material
DETAIL
19.5mm
DETAIL
6mm
ALU STAND
#372115
X1 GRAPHITE LOWER
SUSPENSION ARM 2.5mm
To improve steering in low-traction
conditions with standard F1 front tires.
Mount the front tube on the upper arm into the correct hole, depending on the front track-width.
If you use STANDARD TRACK-WIDTH, use the
outside holes on the upper arms.
If you use WIDE TRACK-WIDTH, use the inside
holes on the upper arms.
NOTE:
For more information about the TRACK-WIDTH alternatives see page 13.
8
WHELLBASE ADJUSTMENT
By changing the position of the front suspension
on the chassis, you can change the wheelbase by
+/-4mm.
VERY IMPORTANT
When setting the wheelbase all the mounting
positions on chassis and top deck must be same.
When using middle position as initial setting, all
mounting positions on chassis and top deck must
be in the middle.
STANDARD (INITIAL SETTING)
As an initial setting use the middle holes for
standard wheelbase.
LONG
The long wheelbase is recommended for high-
traction tracks or large, open tracks. The long
wheelbase makes the car turn smoother, improves
stability, and makes the car easier to drive.
SHORT
The short wheelbase is recommended for low- to
medium-traction tracks or smaller technical tracks.
The short wheelbase improves steering and rotation
of the car.
STANDARD
TOP DECK
LONG
SHORT
902306
SH M3x6
LOWER ARMS
The adjustable backstops are used to limit the steering angle.
Adjust the backstop with the set-screw to achieve the maximum
steering angle needed. Adjust the steering angle on both L & R
sides to the same amount.
BACKSTOP
STEERING ANGLE
1.5 mm
DETAIL
The top deck setting must be always
identical with the wheelbase setting
on the chassis.
2x
1. FRONT SUSPENSION
I recommend using 27° of steering angle for most conditions. If you use more, the car
stops too much; only on very small & technical tracks does it make sense to use more.
PRO TIP to check the angle: Take a look from the top of the car on full steering. The tire
angle should be parallel to the upper wishbone.
Jan Ratheisky
(Factory Driver)
9
902306
SH M3x6
902306
SH M3x6
903308
SFH M3x8
903308
SFH M3x8
303123
SHIM 3x6x2
303123
SHIM 3x6x2
2mm
2mm
10.8mm ALU STAND
10.8mm ALU STAND
2mm
2mm
(INITIAL SETTING)
These shims adjust the roll-center of the front bottom arm as well as the front ride height. The
thickness of the shim depends on the tire diameter. For initial setting, use the 3x6x2mm shim.
IMPORTANT!
Use the same shim thickness under all 4 posts.
These shims adjust the roll-center of the front bottom arm as well as the front ride height. The
thickness of the shim depends on the tire diameter. For initial setting, use the 3x6x2mm shim.
IMPORTANT!
Use the same shim thickness under all 4 posts.
STANDARD TRACK-WIDTH
ALTERNATIVE 1
Standard track-width setting is used for standard F1
front tires such HUDY, RIDE, HOT RACE.
To make sure that you use the correct setting,
measure the track-width with the tires; the track-
width must be maximum 190mm.
2x
WIDE TRACK-WIDTH
ALTERNATIVE 2
Wide track-width setting is used for the narrow F1
front tires such as Volante.
To make sure that you use the correct setting,
measure the track-width with the tires; the track-
width must be maximum 190mm.
2x
DETAIL
DETAIL
INITIAL SETTING
The 2.5mm chassis made from harder graphite
material was developed for very-high traction
conditions, or when using tires that offer a lot
of steering which makes the car more difficult
to drive. This chassis makes the car more
stable and easier to drive, and eliminates
oversteering.
#371027
GRAPHITE CHASSIS - HARD - 2.5mm
1. FRONT SUSPENSION
10
903308
SFH M3x8
903308
SFH M3x8
960030
N M3
NOTE ORIENTATION
902306
SH M3x6
981210
P 2x10
903306
SFH M3x6
3x6mm3x8mm
903414
SFH M4x14
NOTE
ORIENTATION
NOTE
ORIENTATION
NOTE
ORIENTATION
The top deck mounting position must always be identical
as the WHEELBASE mounting position on chassis.
For INITIAL SETTING use the middle position.
(INITIAL SETTING) ALTERNATIVE 1
LONG SHOCK (FORWARD MOUNT POSITION)
For the LONG shock alternative, mount the shock holder on the top deck.
ALTERNATIVE 2
SHORT SHOCK (REARWARD MOUNT POSITION)
For the SHORT shock alternative, without the adaptor, mount the shock
holder on the graphite plate for mounts (page 20).
ALU NUTS M3
#296530-B ALU BLUE OPTION
#296530-K ALU BLACK OPTION
#296530-O ALU ORANGE OPTION
#960030 STEEL SILVER INCLUDED
#960031 ALU SILVER OPTION
1. FRONT SUSPENSION