XtendLan DPC-441 User manual

1R
2W
3Y
4B 21
MIC adjustment
Connection Port
SPK adjustment
Terminal Descriptions
Parts and functions
Name
Camera Lens
Night View LED
Speaker
Nameplate
Call Button
Microphone
90 mm
176 mm
23 mm
Precautions: Do not install camera/bell where there would be a bright light behind the visitor (or where there
would be a bright background), or in a place where the camera lens would be directly exposed to sunlight or a
bright light. If light shines directly into the outdoor camera lens, the image will be over-exposed; it will look white or
silhouetted. Take precautions against this. Do not install the unit in places where is constant vibration, extreme heat
or unusual external interference.
Important: Connect the 1R/2W/3Y/4B of Camera to 1R/2W/3Y/4B of Monitor. ONLY one type of electronic
lock, which is Power-On-To-Open(Power-to-Unlock) type, can be connected to the Camera.
System and Lock Connection
Indoor Monitor
Use Additional Power Supply Power Supply From Monitor
Connection Port Indoor Monitor Connection Port
-
-
+
+
1R 2W 3Y 4B 2 1
Safety Type: Power-on-to-open
The lock consumption must not
greater than 48V 1.5A.
1R 2W 3Y 4B
-
+
1R 2W 3Y 4B 2 1
Safety Type: Power-on-to-open
The lock consumption must not
greater than 12V 500mA.
1R 2W 3Y 4B
Mounting Without Rain Cover
Mounting With Rain Cover
160-165cm
1
2
1234
160-165cm
1
2
1234
DPC-441
User's manual