XtendLan DPM-IP71R User manual

OPERATION MANUAL
Version 1.0 / 202201
7 inch Guard Station
DPM-IP71R
COLOR TFT TOUCH SCREEN WITH HANDSET
• Please read this manual carefully before using the product you purchase,and keep it well for future
use.
• Please note that images and sketch maps in this manual may be different from the actual product.

PRECAUTIONS
• Slots or openings in the back of the monitor, are provided for ventilation and
to ensure reliable operation of the video monitor or equipment and to protect if
from overheating. These openings must not be blocked or covered. The monitor
should never be placed near or over a radiator or heat register and should not be
placed in a built-in installation such as a bookcase unless proper ventilation is
provided.
• All parts should be protected from violence vibration. And not allow be impacting,
knocking and dropping.
• For clean the LCD screen, using hands or wet cloth is forbidden.
• Please do the cleanness with soft cotton cloth, please do not use the organic or
chemical clean impregnate. If necessary, please use pure water or dilute soap
water to clean the dust.
• Image distortion may occur if the video door phone is mounted too close to mag-
netic field e. g. Microwaves, TV, computer etc.
• Please keep away the video door monitor from wet, high temperature, dust, and
caustic and oxidation gas in order to avoid any unpredictable damage.
• Do NOT open the device in any condition, call the administrator for help if there is
any problem or mulfunction happens.

CONTENTS
PARTS AND FUNCTIONS..................................................................................... 4
Part Names............................................................................................................. 4
Mounting................................................................................................................. 5
Screen .................................................................................................................... 6
BASIC OPERATIONS............................................................................................ 7
Answering a call ..................................................................................................... 7
Basic operation based on Namelist........................................................................ 8
Namelist congured........................................................................................... 8
Select a user or a Guard Station to be called.................................................... 8
Select a video door station to be monitored ...................................................... 9
Select a door station to be released the lock..................................................... 9
Basic operation by Input code ............................................................................... 10
Call a user or a Guard Station.......................................................................... 10
Monitor a video door station ............................................................................. 10
Release a door lock.......................................................................................... 11
No Disturb Mode.................................................................................................... 11
Divert Calls ............................................................................................................ 12
View Call Record................................................................................................... 12
Viewing Videos ...................................................................................................... 13
Playback................................................................................................................ 14
SETUP INSTRUCTIONS....................................................................................... 15
Setting date and time............................................................................................. 15
Setting monitor time............................................................................................... 15
Setting ring tone & ring volume ............................................................................. 16
Add IP Camera ...................................................................................................... 16
Delete IP Camera .................................................................................................. 17
Specication .......................................................................................................... 17

-4-
PARTS AND FUNCTIONS
Key functions
Item Description
LCD screen • See the menu details
• Display videos and images
Handset • Pick up to answer the call
Power/No Disturb indicator • Show the power status of the system.
• Show the no disturb status.
Microphone • Transmit audio from one station to other stations.
Unlock button • Press to release the door.
Talk/Mon button • Press to communicate hands free with visitor;
• Press to view the outdoor condition in standby mode.
Speaker • Send out vioce from the visitor.
Connection port • Use to connect external devices to the indoor station.
Lan connector • Use to connect the indoor station to the network.
Part Names
NC NC
12V SW-
SW+
Lan connector
Connection port
LCD Screen
Talk/Mon Button
Unlock Button
Speaker
Power/No Disturb Indicator
Microphone
Handset
Handset Line
* Monitor/Home/Call/Manual record/Unlock button will be light up when power on for the unit.

-5-
PARTS AND FUNCTIONS
145~160 cm
Mounting
The installation height is suggested to 145~160cm.
1. Use screws to fasten the mounting bracket to the wall with mounting box.
2. Connect the 2 wire cables to the unit.
3. Mount the unit to the mounting bracket, make sure the unit is absolutely attached to the
mounting bracket.

-6-
PARTS AND FUNCTIONS
The Main menu is your starting point for using all the applications on your monitor.
Touch anywhere of the screen on monitor in standby mode, the Main menu will appear as fol-
low:
On Main menu page, touch [Functions] icon to display the Functions screen.
Main screen
Functions screen
SETTINGS
Touch it to enter setup page.
Status bar
Displays icons that indicate the
Guard station’s status
INPUT MODE
Touch it to show the keypad.
Favorites
Touch it to
show the list
your favorited.
UNLOCK
Touch it to enter lock
resource page.
Tap here to add de-
vice to favorites
Monitor
Touch it to enter video
resource page.
Monitor
Touch it to enter video
resource page.
Refresh
Namelist
Touch it to enter intercom
selections.
Call secne
Allows you to activate the
functions of No disturb,
Divert.
EVENT
Touch it to review the calling
records.
Playback
Touch it to review the memo
infos.
Functions
Touch it to enter functions
resource page.
Current date and time.
Screen

-7-
BASIC OPERATIONS
Communication screen
Answering a call
00:10 Door Station1
• When receiving a call, the call tone
sounds, video will be displayed on the
screen if the source is a Video Door
Station, and one video will be recorded
for 10 seconds automatically if there
is video（Note：If without SD card,
picture will be recorded; If with SD card,
video will be recorded）.
• Pick up handset to communicate with
the caller for 90 seconds.
• While communication, press /
[Unlock] button to release the corre-
sponding door lock.
• When the communication ends, hang
up handset.
1.If nobody answers the call, the screen will be turned off automatically after 30 seconds.
2.The image will not be displayed when receiving a call from User or Other Guard Station.
3.Manual recording is forbidden during auto recording.
4.While receiving a call,other calling is forbidden.
5.Communication also ends automatically after 90 seconds.
Displays which door station is
calling.
Shows status of talking, unlocking ect.
Displays talking time.
00:10 Door Station1
Red while recording.

-8-
BASIC OPERATIONS
In default, the Namelist is not included.It
should be configured by Building/Guard
unit number .The following instructions are
available in the condition of the namelist is
created.
1.On Main menu, touch [Setting] icon
->Installer->Call_Nbr. And it will appear as
follow: .
2.Input the installer password(de-
faule:66666666), press ‘OK’ to conrm.
3.Select BD_Nbr/GL_Nbr.
4.Input the building number(ex:0000),and
press ‘OK’ to conrm.
Basic operation based on Namelist
1.Namelist congured
1.On Functions menu, touch [Namelist]
item to display Namelist.
2.Select a Name by touching it,calling is
activated immediately.No image will be dis-
played on screen.
2.Select a User or a Guard Station
to be called
66666666
0000
Call_Nbr
BD_Nbr 0000
GL_Nbr 1
Name DPM-IP71R
Global_Nbr -
Local_Nbr -
Input...
IM 00990001
IM 00990002
IM 00990003
IM 00990005
Input...
IM 00990001
IM 00990002
IM 00990003
IM 00990005
IP address
Call_Nbr
Parameter
Upgrade
Onsite tools

-9-
BASIC OPERATIONS
3.If nobody answers the call within 30 sec-
onds,it will stop calling automatically and
shut off the screen.Or touch icon to stop
calling directly.
4.If the call is answered,communication
is starting.
5.When the communication, hang up
handset or press [Close] button.
1.On Functions menu, select [Monitor] to
display Door station list.
3.Select a Video Door Station
to be monitored
2.Select a Video Door Station by touching
it,minitoring is activated immediately.The
monitor time is 30 seconds.
3.The image of outdoor condition will be
displayed on screen,see as follow:
4.During monitoring, these operations are
available:
-Pick up handset to talk with visitor;
-Press / [Unlock] button to re-
lease the door lock;
-Press [Close] button to end monitoring.
00:10 [9002]CDS2
1.On Functions menu, select [Monitor]
to display Door Station list.
4.Select a door station to be
released the lock
2.Select a Door Station by touching
[Unlock] icon to release the correspond-
ing lock.

-10-
BASIC OPERATIONS
The another way to activate the functions of calling, monitoring, unlocking is by inputting code
via the keypad on screen.
Basic operation by Input code
For example,maybe you just remember
the room code including the numbers of
32,input the code 32 on input box,then
touch the key “OK”, all Namelist which is
including the code of 32 will be displayed.
1.Call a User or a Guard Station
On Functions menu, select [Namelis],
touch [Input] to display Search screen.
Search by digital numbers:
Select the target you want to activate
calling.
Maybe you just know the name of User
or Guard Station. For example,input the
name “jim” on input box,then touch the
key “OK”, all Users or Guard Stations
called “jim” will be displayed.
2.The inputting method is the same as
the section of Calling User or Guard
Station.
2.Monitor a Video Door Station
1.On Functions menu, select [Monitor],
touch [Input] icon to display Search
screen.
Search by name:
Select the target you want to activate
calling.
3.Select the Video Door Station you want
to activate monitoring.
32
IM 00990032
IM 00320002
IM 00990323
IM 00932005
JIM
JIM 00990032
JIM 00320002
JIM 00990323
JIM 00932005