Xtreme Power Conversion A60-550 Guide

A60 Standby UPS
550VA, 750VA Models
User & Installaon Manual
www.xpcc.com | © 2020 Xtreme Power Conversion Corporaon. All rights reserved. (Rev 8/24/20)

Xtreme Power Conversion Corporaon
A60 User’s Manual
Page 2
Uninterrupble Power Supply
Table of Contents
Installaon and Operaon............................................................................3
LCD Display..................................................................................................3
Product Overview........................................................................................ 3
LED Indicators..............................................................................................4
Safety Precauons.......................................................................................5
Troubleshoong...........................................................................................6
Specicaons...............................................................................................7
Obtaining Service.........................................................................................8
Xtreme Power Conversion Limited Warranty................................................9

Xtreme Power Conversion Corporaon
A60 User’s Manual
Page 3
Uninterrupble Power Supply
Installaon and Operaon
Inspecon
The following items are inside the box:
● UPS unit ● User manual
Remove the UPS from its package and inspect it for damage that may have occurred during shipping. If any dam-
age is discovered, re-pack the unit and return it to the place of purchase.
Connect to Ulity Power
Connect AC power cord to ulity power. Then, the UPS will start to charge inside baery. For best result, charge
the baery for 6 hours prior to inial use.
Plug in Equipment
Baery Backup Outlets (4 or 5)
Connect computer and monitor to the “Baery Backup” outlets. These outlets provide baery backup, EMI lter-
ing, line condioning, and surge protecon. Baery power is automacally provided in case of power failure.
Surge-Protected Outlets (4 or 5)
Connect a printer, fax machine, or scanner to the “Surge-protected” outlets. These outlets do not provide power
during power failure.
CAUTION: NEVER connect a laser printer or scanner to the baery backup sockets of UPS. The equipment may
draw signicantly power to overload the UPS.
Turn On/O the UPS
To turn on the UPS unit, press the power switch lightly. Then, the LED or LCD will light up. To turn o the UPS unit,
press the power switch again. Then, display will shut o.
Product Overview
1. LCD display or LED indicators (Please check LED or LCD secon for the details)
2. Power switch
3. AC input
4. Baery backup outlets
5. Surge-protected outlets
6. USB port (opon)
7. Modem/phone/network surge protecon (opon)
8. Coax surge protecon (opon)
9. USB charger port (opon)

Xtreme Power Conversion Corporaon
A60 User’s Manual
Page 4
Uninterrupble Power Supply
LED Indicators
LED Alarm UPS Status
● Green O The mains is normal and UPS is
operated normally.
*Yellow Sounding every ten seconds Power failure occurs and UPS is on
baery mode.
*Yellow Sounding every second Low baery
o Green Output voltage UPS is o
● Red Connuously sounding UPS fault
●LED on o LED O * LED ashing
Operaon Display
UPS Mode LCD Descripon
UPS Power on When UPS is powered on, it will
enter this mode for 4 seconds.
AC Mode
LCD informaon will be displayed
in the following order when LCD is
touched.
1. Output voltage
2. Input voltage
3. Load level
4. Baery capacity
Overload in AC mode
icon will ash.
When overload occurs, alarm will
beep every 0.5 second.
Baery Mode
When battery level is low, icon will
ash.
Alarm will beep every 10 seconds
and LCD informaon will be dis-
played in the following order when
LCD is touched.
1. Output voltage
2. Input voltage
3. Load level
4. Baery capacity
Overload in baery mode
icon will ash.
When overload occurs, alarm will
beep every 0.5 second.
NOTE: If backlight shuts o, you may acvate it by touching the screen.

Xtreme Power Conversion Corporaon
A60 User’s Manual
Page 5
Uninterrupble Power Supply
Fault Code Table:
Fault condion LCD Soluons
Output short circuited Disconnect short-circuited loads
and restart the UPS again.
Overload fault Disconnect all output loads and
restart the UPS again.
Overcharge Call for service immediately.
Bad or severely discharged baery Please replace the baery.
High output voltage fault Call for service immediately.
If fault alarm occurs, please call for service immediately.
WARNING: Changes or modicaons not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.Turn UPS ON/ OFF
To turn the UPS unit on, press the Power switch on the front of the UPS. To turn the UPS unit o, press the Power
switch on the front of the unit again.
SAVE THESE INSTRUCTION-This manual contains important instrucons that should be
followed during installaon and maintenance of the UPS and baeries.
• This UPS ulizes voltage that may be hazardous. Do not aempt to disassemble the unit. The unit contains no
user replaceable parts. Only factory service personnel may perform repairs.
• This pluggable type A equipment with baery already installed by the supplier is operator installable and may
be operated by laymen.
• The mains socket outlet that supplies the UPS shall be installed near the UPS and shall be easily accessible.
• During the installaon of this equipment it should be assured that the sum of the leakage currents of the UPS
and the connected loads does not exceed 3.5mA.
• Connecon to any other type of receptacle other than a two-pole, three-wire grounded receptacle may result
in shock hazard as well as violate local electrical codes.
• In the event of an emergency, press the “OFF” buon and disconnect the power cord from the AC power sup-
ply to properly disable the UPS.
• Do not allow any liquids or any foreign object to enter the UPS. Do not place beverages or any other liquid-
containing vessels on or near the unit.
• This unit intended for installaon in a controlled environment (temperature controlled, indoor area free of
conducve contaminants). Avoid installing the UPS in locaons where there is standing or running water, or
excessive humidity.
• Do not plug the UPS input into its own output.
• Do not aach a power strip or surge suppressor to the UPS.
• Do not aach non-computer-related items, such as medical equipment, life-support equipment, microwave
ovens, or vacuum cleaners to UPS.
• A baery can present a risk of electrical shock and high short circuit current. The following precauons should
be observed when working on baeries:

Xtreme Power Conversion Corporaon
A60 User’s Manual
Page 6
Uninterrupble Power Supply
1) Remove watches, rings, or other metal objects from the hands.
2) Use tools with insulated handles.
3) Wear rubber gloves and boots.
4) Do not lay tools or metal parts on top of baeries.
5) Disconnect charging source prior to connecng or disconnecng baeries terminal.
6) Remove baery grounds during installaon and maintenance to reduce likelihood of shock.
• Unplug the UPS prior to cleaning and do not use liquid or spray detergent.
• Internal baery voltage is 12VDC.Sealed, lead-acid, 6-cell baery.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protecon against harmful interfer-
ence in a residenal installaon. This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instrucons, may cause harmful interference to radio communicaons.
However, there is no guarantee that interference will not occur in a parcular installaon. If this equipment does
cause harmful interference to radio or television recepon, which can be determined by turning the equipment
o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separaon between the equipment and receiver.
- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
• Do not dispose of baeries in a re as they may explode.
• Servicing of baeries should be performed or supervised by personnel knowledgeable of baeries and the
required precauons. Keep unauthorized personnel away from baeries.
• When replacing baeries, replace with the same number and type of sealed lead-acid baery.
• Do not open or mulate the baery or baeries. Release electrolyte is harmful to the skin and eyes. It may
be toxic.
• Aenon, hazardous through electric shock. Also with dis- connecon of this unit from the mains, hazardous
voltage sll may be accessible through supply from baery. The baery supply should be therefore discon-
nected in the plus and minus pole at the connectors of the baery when maintenance or service work inside
the UPS is necessary.
• To reduce the risk of overheang the UPS, do not cover the UPS’ cooling vents and avoid exposing the unit to
direct sunlight or installing the unit near heat eming appliances such as space heater or furnaces.
Troubleshoong
Condion Possible Causes Alarm
Nothing is displayed on the panel.
The UPS is not on. Press the power switch again to
turn on the UPS.
Baery voltage is too low. Charge the baery at least 6 hours.
Baery fault. Replace the baery.
The UPS always on baery mode Power cord loose. Re-plug the power cord.
The UPS connuously beeps. Please check the fault code for the
details.
Please check the fault code for the
details.
Backup me too short
The UPS is overloaded Remove some of the load from the
output of the UPS
Baery voltage is too low Charge the UPS at least 8 hours
Baery defect Replace the baery with the same
type of baery

Xtreme Power Conversion Corporaon
A60 User’s Manual
Page 7
Uninterrupble Power Supply
Specicaons
MODEL NUMBER A60-550 A60-750
CAPACITY Power rang 550VA (330W) 750VA (450W)
INPUT Voltage 110/120VAC
Frequency 50/60Hz auto-sensing
OUTPUT Voltage 110/120VAC
Waveform Simulated sine wave
Frequency 50Hz ± 1Hz or 60Hz
Transfer me 2–6ms
BATTERY Baery type Sealed, maintenance free lead acid
Baery quanty and size (1) 12V 4.5AH (1) 12V 5AH
Recharge 8 hours to 90% capacity
PHYSICAL UPS dimensions (W x D
x H) 6.2 x 12 x 3.7 in
UPS weight 5.7 lbs 6.4 lbs
Line cord 6 , 5-15P
Receptacles (10) NEMA 5-15R receptacles (5 baery back up + 5 surge only)
USB charging port N/A (2) USB A-type 5V, 2.4A
ENVIRONMENT Operang temperature 32–104°F (0–40°C)
Humidity 0–90%
Altude 11,500  above sea level
INDICATORS & Display 3 LED's Touch LCD
ALARMS Data Line Protecon N/A RJ-11 and RJ45 (10/100)
APPROVALS UL, cUL, RoHS, TAA
WARRANTY 3 years electronics, 3 years baery (USA and Canada)
COMMUNICATIONS INTERFACE USB and Cable
INCLUDED IN BOX USB Cable and User Manual

Xtreme Power Conversion Corporaon
A60 User’s Manual
Page 8
Uninterrupble Power Supply
Obtaining Service
If the UPS requires Service:
1. Use the TROUBLESHOOTING secon in this manual to eliminate obvious causes.
2. Verify there are no circuit breakers tripped.
3. Call your dealer for assistance. If you cannot reach your dealer, or if they cannot resolve the problem, call Xtreme
Power Conversion Corp Technical Support at 800.582.4524. Technical support inquiries can also be made at
[email protected]. Please have the following informaon available BEFORE calling the Technical Support
Department:
• Your name and address.
• The serial number of the unit.
• Where and when the unit was purchased.
• All of the model informaon about your UPS.
• Any informaon on the failure, including LED’s that may or may not be illuminated.
• A descripon of the protected equipment, including model numbers if possible.
• A technician will ask you for the above informaon and, if possible, help solve your problem over the
phone. In the event that the unit requires factory service, the technician will issue you a Return Mate-
rial Authorizaon number (RMA).
If you are returning the UPS to Xtreme Power for service, please follow these procedures:
1. Pack the UPS in its original packaging. If the original packaging is no longer available, ask the Technical Sup-
port Technician about obtaining a replacement set of packaging material. It is important to pack the UPS
properly in order to avoid damage in transit. Never use Styrofoam beads for a packing material.
2. Include a leer with your name, address, dayme phone number, RMA number, a copy of your original
sales receipt, and a brief descripon of the problem.
3. Mark the RMA number on the outside of all packages. Xtreme Power cannot accept any package without
the RMA number marked on the outside of the boxes.
4. Return the UPS by insured, prepaid carrier to the address provided by the Technician.
5. Refer to the Warranty statements in this manual for addional details on what is covered.

Xtreme Power Conversion Corporaon
A60 User’s Manual
Page 9
Uninterrupble Power Supply
Xtreme Power Conversion Limited Warranty
Xtreme Power Conversion (XPC) Corporaon warrants Xtreme Power Conversion equipment, when properly ap-
plied and operated within specied condions, against faulty materials or workmanship for a period of three years
for A60 Series products from the date of purchase. XPC Corporaon warrants internal baeries for a period of
three years from the date of purchase. For equipment sites within the United States and Canada, this warranty
covers repair or replacement, at the sole discreon of XPC Corporaon. The customer is responsible for the costs
of shipping the defecve product to XPC Corporaon. XPC Corporaon will pay for ground shipment of the re-
paired or replacement product. This warranty applies only to the original purchaser.
If equipment provided by XPC Corporaon is found to be Dead-on-Arrival (DOA), XPC Corporaon will be respon-
sible for the costs of shipping product to and returning equipment from the customer in a mely manner as agreed
to with the customer, once the customer has requested and received a Return Material Authorizaon (RMA)
number. DOA equipment is dened as equipment that does not properly funcon according to user documenta-
on when inially received and connected in conjuncon with proper procedures as shown in the user documen-
taon or via support provided by XPC Corporaon personnel or authorized agents.
This warranty shall be void if (a) the equipment is repaired or modied by anyone other than XPC Corporaon or
a XPC Corporaon approved third party; (b) the equipment is damaged by the customer, is improperly used or
stored, is subjected to an adverse operang environment, or is operated outside the limits of its electrical speci-
caons; or (c) the equipment has been used or stored in a manner contrary to the equipment’s operang manual,
intended use or other wrien instrucons. Any technical advice furnished by XPC Corporaon or a XPC Corpora-
on authorized representave before or aer delivery with regard to the use or applicaon of Xtreme Power Con-
version equipment is furnished on the basis that it represents XPC Corporaons best judgment under the situaon
and circumstances, but it is used at the recipient’s sole risk.
EXCEPT AS STATED ABOVE, XPC Corporaon DISCLAIMS ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
EXCEPT AS STATED ABOVE, IN NO EVENT WILL XPC Corporaon BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCI-
DENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF Xtreme Power Conversion EQUIPMENT,
including but not limited to, any costs, lost prots or revenue, loss of equipment, loss of use of equipment, loss
of soware, loss of data, cost of substutes, or claims by third pares. Purchaser’s sole and exclusive remedy for
breach of any warranty, expressed or implied, concerning Xtreme Power Conversion equipment, and the only
obligaon of XPC Corporaon under this warranty, shall be the repair or replacement of defecve equipment,
components, or parts; or, at XPC Corporaons sole discreon, refund of the purchase price or substuon of an
equivalent replacement product.