Xylem Goulds eSV Series Parts list manual

eSV Shaft Seal Replacement
How long does it actually take ?

eSV Shaft Seal Replacement
How long does it actually take ?
1. Remove coupling guard ( four screws ) 60 seconds
2. Remove coupling ( four bolts ) 130 sec
3. Remove seal gland screws ( four bolts ) 120 sec
4. Remove seal gland 20 sec
5. Remove rotating portion of seal from inside pump 20 sec
6. Remove stationary portion from the seal gland 20 sec
7. Inspect seal 60 sec
8. Replace rotating portion of seal on pump shaft 20 sec
9. Replace stationary portion of seal info seal gland 40 sec
10. Replace seal gland o ring 20 sec
11. Install seal gland on pump 20 sec
12. Tighten bolts on seal gland 110 sec
13. Replace coupling / coupling bolts 110 sec
14. Set rotating stack height with shim 30 sec
15. Tighten coupling bolts 70 sec
16. Rotate shaft to check for rub 20 sec
17. Replace coupling guard and screws 30 sec
Total 15 minutes