Yale iM1 User manual

1. After following the steps listed on other side of page for enrolling the module,
download the Yale Secure app from the App Store®.
2. Ensure Bluetooth®is enabled on your iPhone®
, iPad® or iPod touch® , and that
you’re within 30cm of your Yale lock.
3. Open the Yale Secure app and agree to allow the app to access your Home Data.
4. If you do not have a home already created, create a new home when prompted.
Tap + to add a new Yale Lock.
5. The app will search for your Yale Lock. Be sure that you are witnin close proximity
(less than 60cm or so). When “Yale Lock” appears, tap to add.
*If the lock does not appear, enter your Master PIN Code on the lock keypad, tap
the gear, tap 7, tap gear, tap 1 and then tap gear.
6. Scan your Accessory Setup Code; shown below, or manually enter within the app.
Connecting the Yale Secure App with the Yale iM1 Network Module
Accessory Setup Code
with Yale®iM1 Network Module
Yale®Secure App Connection
Yale Locks & Hardware
Australia Product Support Tel 1300 LOCKUP • www.yalehome.com.au
Yale Locks & Hardware is a division of Yale Security Inc., an ASSA ABLOY Group Company.
New Zealand Product Support [email protected] • www.yalehome.com
© Copyright 2020 ASSA ABLOY Australia Pty Ltd. All rights reserved. Yale® is a registered trademark of
ASSA ABLOY AB in Australia. Assure Lock® is a registered trademark of ASSA ABLOY Australia Pty Ltd.
Other products’ brand names may be trademarks or registered trademarks of their respective owners and are
mentioned for reference purposes only. Manufactured to ASSA ABLOY Australia Pty Ltd specifications
in Vietnam ABN 90 086 451 907.
THE YALE BRAND, with its unparalleled global reach and range of products, reassures more
people in more countries than any other consumer locking solution.
THE ASSA ABLOY GROUP is the world´s leading manufacturer and supplier of locking solutions,
dedicated to satisfying end-user needs for security, safety and convenience.

Installing the Yale iM1 Network Module
• Enter the 4-8 digit Master PIN code followed by the key.
• Press the key followed by the key.
• Press the key followed by the key.
Enrolling the iM1 Network Module:
The Yale iM1 Network Module must be used with a Yale Assure Lock
and cannot be used in conjunction with any other Yale Network Module.
To Enroll the Module:
IMPORTANT: the batteries must be removed prior
to removing and/or inserting the network module:
• Remove battery cover and batteries.
• Remove and/or insert Network Module.
• Reinstall batteries and battery cover.
P/N AYR-202-iM1-INSTAL-FUL AUNZ Issue 2 0720
Installation and Programming Instructions
Yale®iM1 Network Module