YaliTech ETI SUPER-FAST MINI User manual

³È¨0«ٳI³ÁxXzX
ÁR0«xx0Á0«
810-279/15.10.18
Operating Instructions
Product code:
810-279
Supplied by
Electronic Temperature Instruments Ltd
Worthing · West Sussex · BN14 8HQ
01903 202151 · [e-mail] · etiltd.com
Yalitech Instruments
Santiago de Chile, Río Refugio 9648, Parque de Negocios ENEA, Pudahuel.
www.yalitech.cl
Yalitech Instruments
Santiago de Chile, Río Refugio 9648, Parque de Negocios ENEA, Pudahuel.
www.yalitech.cl · [email protected] · ([phone]

Xz³Á«Èx0zÁ¨0«ÁXz - The instrument
is switched on by removing the probe cover
or by pressing the Hold or Max/Min button.
Insert the probe into the substance being
measured. The instrument reading may
take a few seconds to stabilise, depending
on the nature of the measurement. The
instrument will automatically turn off after
one hour of inactivity if not placed within
the probe cover.
Rn( - Press the Hold button to retain the
ƳǣɀȵǼƏɵƺƳȸƺƏƳǣȇǕً۳!Ȓȸ۳IɯǣǼǼˢƏɀǝًȵȸƺɀɀ
the Hold button again to resume taking
temperature. Please note: Once Hold is
selected the unit will not automatically
turn off.
xæٖxXz - Press the Max/Min button to
display the maximum reading and a 'Max'
ɀɵȅƫȒǼɯǣǼǼˢƏɀǝǣȇɎǝƺƳǣɀȵǼƏɵِ¨ȸƺɀɀ
the Max/Min button again to display the
minimum reading and a 'Min' symbol will
ˢƏɀǝǣȇɎǝƺƳǣɀȵǼƏɵِ¨ȸƺɀɀɎǝƺxƏɴٖxǣȇ
button again to return to normal readings.
To reset, simply hold the Max/Min button
for three seconds. Please note: Max/Min
readings are not saved, so switching off the
instrument will clear these readings.
۳!ٖ۳I - Unscrew the battery cover at the end
of the instrument and remove the battery.
To select the desired temperature scale,
slide the switch to °C or °F.
ÁÁ0«ç«0¨n!0x0zÁ - The battery will
need to be replaced when 'Bat' is displayed
or if the display dims. Replace the battery
with a 3 volt lithium coin cell (CR2032). The
battery is located under the battery cover
at the end of the instrument. Retighten the
battery cover ensuring the gasket remains
in place for continued water resistance of
the product.
0x!ٖ«IX - Instrument performance may be
affected if operated within a high frequency
ȸƏƳǣȒˡƺǼƳًɀɖƬǝƏɀȇƺƏȸƏȅȒƫǣǼƺȵǝȒȇƺًȒȸ
if subjected to an electrostatic shock.
JÈ«zÁ00 - This instrument carries a
one-year guarantee against defects in either
components or workmanship. During this
period, products that prove to be defective
will, at the discretion of ETI, be either
repaired or replaced without charge. This
guarantee does not apply to sensors/probes,
where a six-month period is offered. The
product guarantee does not cover damage
caused by fair wear and tear, abnormal
storage conditions, incorrect use, accidental
misuse, abuse, neglect, misapplication
ȒȸȅȒƳǣˡƬƏɎǣȒȇِIɖǼǼƳƺɎƏǣǼɀȒǔǼǣƏƫǣǼǣɎɵƏȸƺ
available within ETI’s Terms & Conditions
of Sale at etiltd.com/terms. In line with
our policy of continuous development, we
reserve the right to amend our product
ɀȵƺƬǣˡƬƏɎǣȒȇɯǣɎǝȒɖɎȵȸǣȒȸȇȒɎǣƬƺِ