Yamaha disklavier DKC-850 User manual

Online Services
DKC-850 INTERNET CONNECTION GUIDE
Connection Example
With Router Function Without Router Function
Modem (with router function)
Modem (without router function)
Router/hub
Other device (such as computer)
LAN cable
I/O Center (right side)
Instructions
ATTACH
ETHERNET CABLE
To your modem or
router
To set up the connection, attach one end of the Ethernet cable to a
free port on your modem or router.
ATTACH
ETHERNET CABLE
To your Disklavier
Attach the other end of the cable to the Ethernet port on your
Disklavier. The location of the port is shown here.
PRESS Press the [Internet] button. Congratulations, you are now
connnected. You should see the Internet Direct Connection home
page.
Still can't connect? Follow these instructions…
PRESS If you see a screen saying that you are not successfully connected,
you may need to set up your instrument to connect to your
network. To do so, press [Setup], then [Network] from your remote
control.
On the network screen, you can update your DHCP, DNS, Proxy and
manual IP settings. In most cases you will not need to edit these
settings.
Unless you are manually assigning DNS or IP locations for your
6/4/2011
Y
amaha: Connect to Radio Service For …
…yamaha.com/connect.html?type=radi… 1/2

CONFIRM
NETWORK
SETTINGS
Unless you are manually assigning DNS or IP locations for your
instrument, you can set DHCP to on, and your network should
automatically configure the settings to connect successfully.
If you want to enter your DNS server addresses manually, you can
choose "DHCP and DNS".
If you also want to enter your IP Address, Subnet Mask and
Gateway Server information, select "Manual". Also, if you're using a
proxy server, you will need to enter the name and port of your
proxy server here in order to connect.
Note: If you have any questions about the settings for your
network, please contact your internet service provider, or refer to
the documentation for your router.
PRESS After entering and confirming your network settings, return to the
Internet Direct Connection home page by pressing "Internet" on
your remote.
Attention:
*Once connected to Internet Direct Connection, you'll be able to enjoy Yamaha's Piano Radio services. Don't have a
subscription? Get one now.
*If you have connected successfully and would like to view Radio Service for Piano playback instructions, visit Playback
Instructions.
6/4/2011
Y
amaha: Connect to Radio Service For …
…yamaha.com/connect.html?type=radi… 2/2