Yamaha DVD-S2500 User manual
.YAMAHA
DVD AUDIO/VIDEO SA-CD PLAYER
LECTEUR DE DVD AUDIO/VIDEO SA-CD
·DVD-S2500
OWNER'S MANUAL
MODE
D'EMPLOI
.YAMAHA
NATU"AL
SOUND
DVD
AUmCVV'O<O
SA-CD
OLwe"
O"C-Ba~OO
e
~
Homl
~
0
01
.----r--:~-"~
--
-~
-~
-~
-~
--;==~:
I
Q)@@0
0
(0
j1II
~
@
rillD~~
AUOIONIDEO
SUPER
AUDIO
CD
(DIGITAL
VIDEO)
.YAMAHA
DVD AUDIO/VIDEO SA-CD PLAYER
LECTEUR DE DVD AUDIO/VIDEO SA-CD
·DVD-S2500
OWNER'S MANUAL
MODE
D'EMPLOI
.YAMAHA
NATU"AL
SOUND
DVD
AUmCVV'O<O
SA-CD
OLwe"
O"C-Ba~OO
e
~
Homl
~
0
01
.----r--:~-"~
--
-~
-~
-~
-~
--;==~:
I
Q)@@0
0
(0
j1II
~
@
rillD~~
AUOIONIDEO
SUPER
AUDIO
CD
(DIGITAL
VIDEO)
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK,
DO
NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
12
Grounding or Polarization-This product may be equipped with a
polarized alternating current line plug (a plug having one blade
wider than the other). This plug will fit into the power outlet only
one way. This
is
asafety feature.
If
you are unable
to
insert the plug
fully into the outlet, try reversing the plug.
If
the plug should still
fail to fit, contact your electrician
to
replace your obsolete outlet.
Do not defeat the safety purpose
of
the polarized plug.
13
Power-Cord Protection -Power-supply cords should be routed so
that they are not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to cords at plugs,
convenience receptacles, and the point where they exit from the
product.
14
Lightning -For added protection for this product during a
lightning storm, or when it is left unattended and unused for long
periods
of
time, unplug it from the wall outlet and disconnect the
antenna or cable system. This will prevent damage to the product
due
to
lightning and power-line surges.
15 PowerLines -An outside antenna system should not be located
in
the vicinity
of
overhead power lines or otherelectric light or power
circuits, or where it can fall into such power lines or circuits. When
installing an outside antenna system, extreme care should be taken
to keep from touching such power lines or circuits
as
contact with
them might be fatal.
16
Overloading -Do not overload wall outlets, extension cords, or
integral convenience receptacles as this can result in arisk
of
fire or
electric shock.
17
Object and Liquid Entry -Never push objects
of
any kind into this
product through openings as they may touch dangerous voltage
points or short-out parts that could result in afire or electric shock.
Never spill liquid
of
any kind on the product.
18 Servicing -Do not attempt
to
service this product yourself
as
opening or removing covers may expose you
to
dangerous voltage
or
other hazards. Refer
all
servicing
to
qualified service personnel.
19 Damage Requiring Service -Unplug this product from the wall
outlet and refer servicing
to
qualified service personnel under the
following conditions:
a)
When
the
power-supply
cord
or
plug
is damaged,
b)
If
liquid
has
been
spilled,
or
objects have fallen into the
product,
c)
If
the product
has
been
exposed to rain
or
water,
d)
If
the
product
does
not
operate
nonnally
by following the
operating instructions.
Adjust
only those controls that are
covered
by
the operating instructions as
an
improper
adjustment
of
other
controls
may
result
in
damage
and
will
often require extensive
work
by
aqualified technician to
restore the product to its normal operation,
c)
If
the
product
has
been
dropped
or
damaged
in
any
way,
and
f)
When
the
product
exhibitsadistinct
change
in
perfonnance
-this indicates a
need
for service.
20 Replacement Parts -When replacementparts are required,
be
sure
the service technician has used replacement parts specified by the
manufacturer or have the same characteristics
as
the original part.
Unauthorized substitutions may result in fire, electric shock, or
other hazards.
21
Safety Check -Upon completion
of
any service or repairs
to
this
product, ask the service technician to perform safety checks to
determine that the product
is
in proper operating condition.
22 Wall orCeiling Mounting -The unit should be mounted
to
awall
or ceiling only
as
recommended by the manufacturer.
23 Heat -The product should be situated away from heat sources
such as radiators, heatregisters, stoves, orother products (including
amplifiers) that produce heat.
Explanation
of
Graphical
Symbols
The lightning flash with arrowhead symbol, within an
equilateral triangle,
is
intended
to
alert you
to
the
presence
of
uninsulated "dangerous voltage" within the
product's enclosure that may be
of
sufficient magnitude
to
constitute arisk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended
to
alert you
to
the presence
of
important
operating
cllld
maintenance (servicing) instructions in
the literature accompanying the appliance.
Read Instructions -All the safety and operating instructions
should be read before the product is operated.
Retain Instructions -The safety and operating instructions should
be retained for future reference.
Heed Warnings
-All
warnings on the product and in the operating
instructions should be adhered to.
Follow Instructions -All operating and use instructions should be
followed.
Cleaning -Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners oraerosol cleaners. Use adamp
cloth for cleaning.
Attachments -Do not use attachments not recommended by the
product manufacturer
as
they may cause hazards.
Water and Moisture -
Do
not use this product near water -for
example, near abath tub, wash bowl, kitchen sink, or laundry tub;
in awet basement; or near aswimming pool; and the like.
Accessories -Do not place this producton
an
unstable cart, stand,
tripod, bracket, or table. The product may fall, causing serious
injury to achild
or
adult, and serious damage to the product. Use
only with acart, stand, tripod, bracket, or table recommendedby the
manufacturer, or sold with the product.
Any mounting
of
the product should follow the manufacturer's
instructions, and should use amounting accessory recommended
by the manufacturer.
Aproduct and cart combination should
be
moved
with carc. Quick stops, exccssive forcc, and uneven
surfaces may cause the product and cart combination
to overturn.
4
2
3
9
6
8
7
10
Ventilation -Slots and openings in the cabinet are
provided for ventilation and
to
ensure reliable operation
of
the
product and to protectitfrom overheating, and these openings must
not be blocked or covered. The openings should never be blocked
by placing the product on abed, sofa, rug, or other similar surface.
This product should not be placed in abuilt-in installation such as
abookcase or rack unless proper ventilation
is
provided or the
manufacturer's instructions have been adhered to.
11
Power Sources -This product should be operated only from the
type
of
power source indicated on the marking label.
If
you are not
sure
of
the type
of
powersupply
to
yourhome, consult your product
dealer or local power company. For products intended
to
operate
from battery power, or other sources, refer to the operating
instruct]ons.
5
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK,
DO
NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
12
Grounding or Polarization-This product may be equipped with a
polarized alternating current line plug (a plug having one blade
wider than the other). This plug will fit into the power outlet only
one way. This
is
asafety feature.
If
you are unable
to
insert the plug
fully into the outlet, try reversing the plug.
If
the plug should still
fail to fit, contact your electrician
to
replace your obsolete outlet.
Do not defeat the safety purpose
of
the polarized plug.
13
Power-Cord Protection -Power-supply cords should be routed so
that they are not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to cords at plugs,
convenience receptacles, and the point where they exit from the
product.
14
Lightning -For added protection for this product during a
lightning storm, or when it is left unattended and unused for long
periods
of
time, unplug it from the wall outlet and disconnect the
antenna or cable system. This will prevent damage to the product
due
to
lightning and power-line surges.
15 PowerLines -An outside antenna system should not be located
in
the vicinity
of
overhead power lines or otherelectric light or power
circuits, or where it can fall into such power lines or circuits. When
installing an outside antenna system, extreme care should be taken
to keep from touching such power lines or circuits
as
contact with
them might be fatal.
16
Overloading -Do not overload wall outlets, extension cords, or
integral convenience receptacles as this can result in arisk
of
fire or
electric shock.
17
Object and Liquid Entry -Never push objects
of
any kind into this
product through openings as they may touch dangerous voltage
points or short-out parts that could result in afire or electric shock.
Never spill liquid
of
any kind on the product.
18 Servicing -Do not attempt
to
service this product yourself
as
opening or removing covers may expose you
to
dangerous voltage
or
other hazards. Refer
all
servicing
to
qualified service personnel.
19 Damage Requiring Service -Unplug this product from the wall
outlet and refer servicing
to
qualified service personnel under the
following conditions:
a)
When
the
power-supply
cord
or
plug
is damaged,
b)
If
liquid
has
been
spilled,
or
objects have fallen into the
product,
c)
If
the product
has
been
exposed to rain
or
water,
d)
If
the
product
does
not
operate
nonnally
by following the
operating instructions.
Adjust
only those controls that are
covered
by
the operating instructions as
an
improper
adjustment
of
other
controls
may
result
in
damage
and
will
often require extensive
work
by
aqualified technician to
restore the product to its normal operation,
c)
If
the
product
has
been
dropped
or
damaged
in
any
way,
and
f)
When
the
product
exhibitsadistinct
change
in
perfonnance
-this indicates a
need
for service.
20 Replacement Parts -When replacementparts are required,
be
sure
the service technician has used replacement parts specified by the
manufacturer or have the same characteristics
as
the original part.
Unauthorized substitutions may result in fire, electric shock, or
other hazards.
21
Safety Check -Upon completion
of
any service or repairs
to
this
product, ask the service technician to perform safety checks to
determine that the product
is
in proper operating condition.
22 Wall orCeiling Mounting -The unit should be mounted
to
awall
or ceiling only
as
recommended by the manufacturer.
23 Heat -The product should be situated away from heat sources
such as radiators, heatregisters, stoves, orother products (including
amplifiers) that produce heat.
Explanation
of
Graphical
Symbols
The lightning flash with arrowhead symbol, within an
equilateral triangle,
is
intended
to
alert you
to
the
presence
of
uninsulated "dangerous voltage" within the
product's enclosure that may be
of
sufficient magnitude
to
constitute arisk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended
to
alert you
to
the presence
of
important
operating
cllld
maintenance (servicing) instructions in
the literature accompanying the appliance.
Read Instructions -All the safety and operating instructions
should be read before the product is operated.
Retain Instructions -The safety and operating instructions should
be retained for future reference.
Heed Warnings
-All
warnings on the product and in the operating
instructions should be adhered to.
Follow Instructions -All operating and use instructions should be
followed.
Cleaning -Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners oraerosol cleaners. Use adamp
cloth for cleaning.
Attachments -Do not use attachments not recommended by the
product manufacturer
as
they may cause hazards.
Water and Moisture -
Do
not use this product near water -for
example, near abath tub, wash bowl, kitchen sink, or laundry tub;
in awet basement; or near aswimming pool; and the like.
Accessories -Do not place this producton
an
unstable cart, stand,
tripod, bracket, or table. The product may fall, causing serious
injury to achild
or
adult, and serious damage to the product. Use
only with acart, stand, tripod, bracket, or table recommendedby the
manufacturer, or sold with the product.
Any mounting
of
the product should follow the manufacturer's
instructions, and should use amounting accessory recommended
by the manufacturer.
Aproduct and cart combination should
be
moved
with carc. Quick stops, exccssive forcc, and uneven
surfaces may cause the product and cart combination
to overturn.
4
2
3
9
6
8
7
10
Ventilation -Slots and openings in the cabinet are
provided for ventilation and
to
ensure reliable operation
of
the
product and to protectitfrom overheating, and these openings must
not be blocked or covered. The openings should never be blocked
by placing the product on abed, sofa, rug, or other similar surface.
This product should not be placed in abuilt-in installation such as
abookcase or rack unless proper ventilation
is
provided or the
manufacturer's instructions have been adhered to.
11
Power Sources -This product should be operated only from the
type
of
power source indicated on the marking label.
If
you are not
sure
of
the type
of
powersupply
to
yourhome, consult your product
dealer or local power company. For products intended
to
operate
from battery power, or other sources, refer to the operating
instruct]ons.
5
FCC INFORMATION (for
US
customers)
I.
IMPORTANT
NOTICE:
DO
NOT
MODIFY
THIS UNITl
This product,
when
installed as indicated in the instructions contained
in
this manual, meets
FCC
requirements. Modifications not
expressly approved by
Yamaha
may
void
your
authority, granted by the FCC, to use the product.
2.
IMPORTANT:
When
connecting this
product
to accessories and/or another product use only high quality shielded cables. Cable/s
supplied with this product
MUST
be used. Follow all installation instructions. Failure to follow instructions
could
void your
FCC
authorization to use this product in the USA.
3.
NOTE:
This
product has been tested
and
found to comply with the requirements listed in
FCC
Regulations,
Part
15
for Class "B"
digital devices.
Compliance with theserequirements provides areasonable level
of
assurance thatyouruse
of
this product in aresidential environment
will not result in harmful interference with other electronic devices. This equipment generates/uses radio frequencies and,
if
not
installed and used according to the instructions found in the users manual, may cause interference harmful to the operation
of
other
electronic devices. Compliance with
FCC
regulations does
not
guarantee that interference will not occur in all instal1ations.
If
this
product is found to
be
the source
of
interference, which can
be
determined by turning the product
"OFF"
and
"ON",
please try to
eliminate the problem by using one
of
the following measures:
Relocate either this product or the device that
is
being affected by the interference.
Utilize
power
outlets that are on different
branch
(circuit breaker or fuse) circuits
or
install AC line fiIter/s.
In the case
of
radio
or
TV
interference, relocate/reorient the antenna. Jfthe antenna lead-in
is
300
ohm
ribbon lead, change the lead-
in to coaxial type cable.
If
these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type
of
product.
If
you can not locate the appropriate retailer, please contact Yamaha Electronics Corp., 6660 Orangcthorpe Ave.
Buena
Park,
CA90622.
The above statements apply
ONLY
to those products distributed by
Yamaha
Corporation
of
America
or
its subsidiaries.
We Want You Listening For ALifetime
YAMAHA and the Electronic Industries Association's Consumer Electronics Group want you to get the most out ofyour equipment
by playing it at asafe level. One that lets the sound come through loud and clear without annoying blaring or distor60n -and, most
importantly, without affecting your sensitive hearing.
Since hearing damage from loud sounds
is
often undetectable until it
is
too late, YAMAHA and the Electronic Industries Association's
Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume levels.
fi
I
o!
w,
WanlThl.,1
k~~J,~~!NG
CAUTION
-
Visible
and
invisible
laser
radiation
when
open.
Avoid
exposure
to
beam.
For Customer Use:
Read carefully the information located at the rear panel of
the
player and enter below the Serial No. Retain this information for
future reference.
Model No.
Serial
No.
_
FOR CANADIAN CUSTOMERS
To prevent electric shock, match wide blade of plug to wide slot
and fully insert.
This Class Bdigital apparatus complies with Canadian ICES-003.
This digital apparatus does not exceed the Class Blimits for radio
noise emissions from digital apparatus as set out in the Radio
Interference Regulations ofthe Canadian Department
of
Communications.
POUR LES CONSOMMATEURS CANADIENS
Pour eviter les chocs clectriques, introduire la lame la plus large
de
la fiche dans la borne correspondante de la prise et pousser
jusqu'au fond.
eet
appareil numerique
de
la classe
Best
conforme ala nmme
NMB-003
du
Canada.
CAUTION
Use ofcontrols or adjustments or performance ofprocedures other
than those specified herein may result
in
hazardous radiation
exposure.
ii
FCC INFORMATION (for
US
customers)
I.
IMPORTANT
NOTICE:
DO
NOT
MODIFY
THIS UNITl
This product,
when
installed as indicated in the instructions contained
in
this manual, meets
FCC
requirements. Modifications not
expressly approved by
Yamaha
may
void
your
authority, granted by the FCC, to use the product.
2.
IMPORTANT:
When
connecting this
product
to accessories and/or another product use only high quality shielded cables. Cable/s
supplied with this product
MUST
be used. Follow all installation instructions. Failure to follow instructions
could
void your
FCC
authorization to use this product in the USA.
3.
NOTE:
This
product has been tested
and
found to comply with the requirements listed in
FCC
Regulations,
Part
15
for Class "B"
digital devices.
Compliance with theserequirements provides areasonable level
of
assurance thatyouruse
of
this product in aresidential environment
will not result in harmful interference with other electronic devices. This equipment generates/uses radio frequencies and,
if
not
installed and used according to the instructions found in the users manual, may cause interference harmful to the operation
of
other
electronic devices. Compliance with
FCC
regulations does
not
guarantee that interference will not occur in all instal1ations.
If
this
product is found to
be
the source
of
interference, which can
be
determined by turning the product
"OFF"
and
"ON",
please try to
eliminate the problem by using one
of
the following measures:
Relocate either this product or the device that
is
being affected by the interference.
Utilize
power
outlets that are on different
branch
(circuit breaker or fuse) circuits
or
install AC line fiIter/s.
In the case
of
radio
or
TV
interference, relocate/reorient the antenna. Jfthe antenna lead-in
is
300
ohm
ribbon lead, change the lead-
in to coaxial type cable.
If
these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type
of
product.
If
you can not locate the appropriate retailer, please contact Yamaha Electronics Corp., 6660 Orangcthorpe Ave.
Buena
Park,
CA90622.
The above statements apply
ONLY
to those products distributed by
Yamaha
Corporation
of
America
or
its subsidiaries.
We Want You Listening For ALifetime
YAMAHA and the Electronic Industries Association's Consumer Electronics Group want you to get the most out ofyour equipment
by playing it at asafe level. One that lets the sound come through loud and clear without annoying blaring or distor60n -and, most
importantly, without affecting your sensitive hearing.
Since hearing damage from loud sounds
is
often undetectable until it
is
too late, YAMAHA and the Electronic Industries Association's
Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume levels.
fi
I
o!
w,
WanlThl.,1
k~~J,~~!NG
CAUTION
-
Visible
and
invisible
laser
radiation
when
open.
Avoid
exposure
to
beam.
For Customer Use:
Read carefully the information located at the rear panel of
the
player and enter below the Serial No. Retain this information for
future reference.
Model No.
Serial
No.
_
FOR CANADIAN CUSTOMERS
To prevent electric shock, match wide blade of plug to wide slot
and fully insert.
This Class Bdigital apparatus complies with Canadian ICES-003.
This digital apparatus does not exceed the Class Blimits for radio
noise emissions from digital apparatus as set out in the Radio
Interference Regulations ofthe Canadian Department
of
Communications.
POUR LES CONSOMMATEURS CANADIENS
Pour eviter les chocs clectriques, introduire la lame la plus large
de
la fiche dans la borne correspondante de la prise et pousser
jusqu'au fond.
eet
appareil numerique
de
la classe
Best
conforme ala nmme
NMB-003
du
Canada.
CAUTION
Use ofcontrols or adjustments or performance ofprocedures other
than those specified herein may result
in
hazardous radiation
exposure.
ii
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT
To
assure the finest performance, please read this
manual carefully. Keep it in asafe place for future
reference.
2Install this sound system in awell ventilated, cool, dry,
clean place -away from direct sunlight, heat sources,
vibration, dust, moisture, or cold. In acabinet, allow
about 2.5cm
(l
inch)
of
free space all around this unit
for adequate ventilation.
3Locate this unit away from other electrical appliances,
motors, or transformers to avoid humming sounds.
4Do not expose this unit to sudden temperature changes
from cold
to
hot, nor locate this unit in an environment
with high humidity (i.e., aroom with ahumidifier) to
prevent condensation inside this unit, which may cause
an
electrical shock, fire, damage to this unit, and/or
personal injury.
5Avoid installing this unit in alocation where foreign
objects may fall onto this unit or where this unit may be
exposed to liquid dripping or splashing. On the top
of
this unit, do not place:
-Other components,
as
they may cause damage and/or
discoloration on the surface
of
this unit.
-Burning objects (i.e., candles), as they may cause
fire, damage to this unit, and/or personal injury.
-Containers with liquid in them,
as
they may fall,
spilling the liquid and causing an electrical shock to
the user and/or damage to this unit.
6Do not cover this unit with anewspaper, tablecloth,
curtain, etc. in order not to obstruct heat radiation.
If
the temperature inside this unit rises, it may cause fire,
damage
to
this unit, and/or personal injury.
7Do not plug in this unit to awall outlet until all
connections are complete.
8Do not operate this unit upside-down. It may overheat,
possibly causing damage.
9
Do
not
use
excessive
force
on
switches,
knobs
and/or
cords.
10 When disconnecting the power cord from the wall
outlet, grasp the plug; do not pull the cord.
11
Do not clean this unit with chemical solvents; this
might damage the finish. Use aclean, dry cloth.
12
Use only the voltage specified on this unit. Using this
unit with ahigher voltage than specified is dangerous
and may cause fire, damage to this unit, and/or
personal injury. YAMAHA will not be held responsible
for any damage resulting from use
of
this unit with a
voltage other than
as
specified.
13
To
prevent damage by lightning, disconnect the power
cord from the wall outlet during an electrical storm.
14
Do not attempt to modify or
fix
this unit. Contact
qualified YAMAHA service personnel when any
service
is
needed. The cabinet should never be opened
for any reason.
15
When not planning to use this unit for long periods
of
time (i.e., vacation), disconnect the
AC
power plug
from the wall outlet.
16
Be sure to read the "TROUBLESHOOTING" section
on common operating errors before concluding that
this unit is faulty.
iii
17
Before moving this unit, press STANDBY/ON to set
the unit in standby mode, then disconnect the
AC
power plug from the wall outlet.
18
Place this unit on aflat, hard and stable surface.
19
There must be sufficient room in front
of
the player for
the disc tray
to
be opened.
20 The mechanical parts
of
the set contain self-lubricating
bearings and must not be oiled or lubricated.
The unit
is
not disconnected from the
AC
power source
as
long
as
it
is
connected
to
the wall outlet, even
if
this
unit itselfis turned off. This state is called the standby
mode. In this state, this unit
is
designed to consume a
very small quantity
of
power.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSETHIS UNIT TORAIN
OR
MOISTURE.
NOTE:
Pictures shown maybe different between countries.
Nevermake
or
change connections with the powerswitched
on.
LASER SAFETY
This unit employs a laser. Due
to
possible eye injury, only
aqualified service person should remove the cover or
attempt to service this device.
CAUTION
VISIBLE AND INVISIBLELASER RADIATIONWHEN
OPEN. AVOID EXPOSURE TO BEAM.
LASER DIODE PROPERTIES
Type Semiconductor laser GaAIAs
Wave length 650 nm (DVD/SA-CD)
790 nm (VCD/CD)
Output Power 7mW (DVD/SA-CDNCD/CD)
DANGER
This unit emits visible laser radiation when open. Avoid
direct eye exposure
to
beam.
When this unit is plugged into awall outlet, do not place
your eyes close to the opening
of
the disc tray and other
openings or look inside.
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT
To
assure the finest performance, please read this
manual carefully. Keep it in asafe place for future
reference.
2Install this sound system in awell ventilated, cool, dry,
clean place -away from direct sunlight, heat sources,
vibration, dust, moisture, or cold. In acabinet, allow
about 2.5cm
(l
inch)
of
free space all around this unit
for adequate ventilation.
3Locate this unit away from other electrical appliances,
motors, or transformers to avoid humming sounds.
4Do not expose this unit to sudden temperature changes
from cold
to
hot, nor locate this unit in an environment
with high humidity (i.e., aroom with ahumidifier) to
prevent condensation inside this unit, which may cause
an
electrical shock, fire, damage to this unit, and/or
personal injury.
5Avoid installing this unit in alocation where foreign
objects may fall onto this unit or where this unit may be
exposed to liquid dripping or splashing. On the top
of
this unit, do not place:
-Other components,
as
they may cause damage and/or
discoloration on the surface
of
this unit.
-Burning objects (i.e., candles), as they may cause
fire, damage to this unit, and/or personal injury.
-Containers with liquid in them,
as
they may fall,
spilling the liquid and causing an electrical shock to
the user and/or damage to this unit.
6Do not cover this unit with anewspaper, tablecloth,
curtain, etc. in order not to obstruct heat radiation.
If
the temperature inside this unit rises, it may cause fire,
damage
to
this unit, and/or personal injury.
7Do not plug in this unit to awall outlet until all
connections are complete.
8Do not operate this unit upside-down. It may overheat,
possibly causing damage.
9
Do
not
use
excessive
force
on
switches,
knobs
and/or
cords.
10 When disconnecting the power cord from the wall
outlet, grasp the plug; do not pull the cord.
11
Do not clean this unit with chemical solvents; this
might damage the finish. Use aclean, dry cloth.
12
Use only the voltage specified on this unit. Using this
unit with ahigher voltage than specified is dangerous
and may cause fire, damage to this unit, and/or
personal injury. YAMAHA will not be held responsible
for any damage resulting from use
of
this unit with a
voltage other than
as
specified.
13
To
prevent damage by lightning, disconnect the power
cord from the wall outlet during an electrical storm.
14
Do not attempt to modify or
fix
this unit. Contact
qualified YAMAHA service personnel when any
service
is
needed. The cabinet should never be opened
for any reason.
15
When not planning to use this unit for long periods
of
time (i.e., vacation), disconnect the
AC
power plug
from the wall outlet.
16
Be sure to read the "TROUBLESHOOTING" section
on common operating errors before concluding that
this unit is faulty.
iii
17
Before moving this unit, press STANDBY/ON to set
the unit in standby mode, then disconnect the
AC
power plug from the wall outlet.
18
Place this unit on aflat, hard and stable surface.
19
There must be sufficient room in front
of
the player for
the disc tray
to
be opened.
20 The mechanical parts
of
the set contain self-lubricating
bearings and must not be oiled or lubricated.
The unit
is
not disconnected from the
AC
power source
as
long
as
it
is
connected
to
the wall outlet, even
if
this
unit itselfis turned off. This state is called the standby
mode. In this state, this unit
is
designed to consume a
very small quantity
of
power.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSETHIS UNIT TORAIN
OR
MOISTURE.
NOTE:
Pictures shown maybe different between countries.
Nevermake
or
change connections with the powerswitched
on.
LASER SAFETY
This unit employs a laser. Due
to
possible eye injury, only
aqualified service person should remove the cover or
attempt to service this device.
CAUTION
VISIBLE AND INVISIBLELASER RADIATIONWHEN
OPEN. AVOID EXPOSURE TO BEAM.
LASER DIODE PROPERTIES
Type Semiconductor laser GaAIAs
Wave length 650 nm (DVD/SA-CD)
790 nm (VCD/CD)
Output Power 7mW (DVD/SA-CDNCD/CD)
DANGER
This unit emits visible laser radiation when open. Avoid
direct eye exposure
to
beam.
When this unit is plugged into awall outlet, do not place
your eyes close to the opening
of
the disc tray and other
openings or look inside.
,Table of Contents
Patent information 2
Playable disc formats 2
Region management information 3
Supplied accessories 3
Installing batteries in the remote control 3
Using the remote control. 4
Maintenance 4
Front panel 5
Rear panel 6
Remote control connectors and RS-232C terminal 6
Remote control 7
Audio connection 8
Digital audio connections 8
i.LINK components connections 8
Analog audio (6CH DISCRETE) connection 8
Analog audio (MIXED 2CH) connection 9
Video connections 9
HDMI component connections 9
Switching on 10
Setups before the initial playback 10
General operation
12
Preferences
12
Features
12
Adv.Picture
12
Picture
13
Sound
13
Toolbar 14
Program
:.
14
View
14
Play option
14
Search
14
Slide Show
15
Setup
15
Access
15
Features
15
TV
15
Audio Menu
16
Language
17
Speakers
17
DVD/CD Mode
18
SA-CD Mode
18
i.LINK
18
Basic playback 20
DVD-Video and DVD-Audio 20
Playing adisc 20
Smart Resume 20
DVD features
21
Menu
21
Camera angle
21
Changing the audio language and format.
21
Subtitle language
21
DVD-Audio features
21
Changing pages
21
Playing bonus groups
21
DVD Video Mode
21
SA-CD (Super Audio CD) 22
Playing adisc 22
Sound mode -SA-CD playback 22
Audio CD
23
Playing adisc
23
Video CD and Super Video CD 23
Playing adisc
23
Playback Control (PBC)
23
MP3 24
MP3 disc features 24
Playing adisc 24
Choosing an Album/Track to playback 24
MP3 text 24
lPEG 25
JPEG disc features
25
Playing adisc
25
Slide show setting
25
Rotating the image
25
General features 26
Moving to another segment. 26
Search 26
Slow motion 26
Still picture and frame-by-frame playback 26
Time search 26
Repeat 27
Repeat A-B 27
Shuffle 27
Scan 27
Zoom
27
FTS video/audio program
28
Activating/deactivating the FTS program 28
Erasing atrack/chapter/index from the FTS list.
28
Erasing all tracks/chapters/indexes from the FTS list
28
Disc lock 28
Activating/deactivating Disc lock 28
Authorizing discs 28
Deauthorizing discs 29
Parental Control 29
Activating/deactivating Parental Control 29
Country 29
Changing the four-digit PIN 29
If
you forget your four-digit code 29
1
,Table of Contents
Patent information 2
Playable disc formats 2
Region management information 3
Supplied accessories 3
Installing batteries in the remote control 3
Using the remote control. 4
Maintenance 4
Front panel 5
Rear panel 6
Remote control connectors and RS-232C terminal 6
Remote control 7
Audio connection 8
Digital audio connections 8
i.LINK components connections 8
Analog audio (6CH DISCRETE) connection 8
Analog audio (MIXED 2CH) connection 9
Video connections 9
HDMI component connections 9
Switching on 10
Setups before the initial playback 10
General operation
12
Preferences
12
Features
12
Adv.Picture
12
Picture
13
Sound
13
Toolbar 14
Program
:.
14
View
14
Play option
14
Search
14
Slide Show
15
Setup
15
Access
15
Features
15
TV
15
Audio Menu
16
Language
17
Speakers
17
DVD/CD Mode
18
SA-CD Mode
18
i.LINK
18
Basic playback 20
DVD-Video and DVD-Audio 20
Playing adisc 20
Smart Resume 20
DVD features
21
Menu
21
Camera angle
21
Changing the audio language and format.
21
Subtitle language
21
DVD-Audio features
21
Changing pages
21
Playing bonus groups
21
DVD Video Mode
21
SA-CD (Super Audio CD) 22
Playing adisc 22
Sound mode -SA-CD playback 22
Audio CD
23
Playing adisc
23
Video CD and Super Video CD 23
Playing adisc
23
Playback Control (PBC)
23
MP3 24
MP3 disc features 24
Playing adisc 24
Choosing an Album/Track to playback 24
MP3 text 24
lPEG 25
JPEG disc features
25
Playing adisc
25
Slide show setting
25
Rotating the image
25
General features 26
Moving to another segment. 26
Search 26
Slow motion 26
Still picture and frame-by-frame playback 26
Time search 26
Repeat 27
Repeat A-B 27
Shuffle 27
Scan 27
Zoom
27
FTS video/audio program
28
Activating/deactivating the FTS program 28
Erasing atrack/chapter/index from the FTS list.
28
Erasing all tracks/chapters/indexes from the FTS list
28
Disc lock 28
Activating/deactivating Disc lock 28
Authorizing discs 28
Deauthorizing discs 29
Parental Control 29
Activating/deactivating Parental Control 29
Country 29
Changing the four-digit PIN 29
If
you forget your four-digit code 29
1
Introduction
This manual refers to disc types using the following
symbols:
Thank you for purchasing the YAMAHA DVD
AUDIONIDEO
SA-CD player. This Owner's Manual
explains its basic operations. DVD-Audio DVD-Video Video
CD*1
This unit can play the disc types associated with the
logos shown below. (Do not attempt to load any other
type
of
disc into the unit, or the unit may be damaged.)
2re~~~~
I.
--
--
~,.
V
IDE
0 R
~.~~.@~D
SUPER
AUDIO
CD
Hornl™
HDMI, the HDMI logo and High-
H,GHDEFINITIONMULTIMEDIAINTERFACE
Definition Multimedia Interface are
trademarks orregistered trademark
of
HDMI Licensing LLC.
This product incorporates copyright protection
technology thatis protectedby method claims
of
certain
u.S.
patents andotherintellectual property rights owned
by Macrovision Corporation and other rights owners.
Use
of
this copyright protection technology must be
authorizedby Macrovision Corporation, and is intended
for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
"i.LINK" and the "i.LINK" logo iare trademarks
of
Sony Corporation.
This product complies with the following i.LINK
interface specifications:
1.
IEEE Std 1394a-2000, Standard for aHigh
Performance Serial Bus
2.
Audio and Music Data Transmission Protocol 2.1
Following the standardfor AM824 sequence adaptation
layers, the product is compatible with IEC60958
bitstream, DVD-A and SA-CD media.
*1
~
icon includes Super Video CD.
Notes:
-This unit
is
designedfor use with SA-CD, DVD-
Video, DVD-Audio, Video
CD,
Super Video
CD,
Audio
CD,
CD-R and CD-RW(MP3 and
IPEG
supported), DVD+R and DVD+RW, DVD-R and
DVD-RW.
-CD-R andCD-RWdiscs cannotbeplayedunless they
have beenfinalized.
DVD+R and DVD+RWdiscs cannot be played
unless they have beenfinalized.
DVD-R and DVD-RWdiscs must be recorded in
Video format and must befinalized.
Some discs cannot be played depending on disc
characteristics or recording conditions.
Be sure
to
use only CD-R and CD-RWdiscs from
reliable manufacturers.
Dolby Digital, DTS Digital Surround, and MPEG
digital audio are supported.
PAL andNTSC are supported.
This unitfeatures the PAL and NTSC video system
convertingfunction
to
allow you watching the
different types
of
video discs on one TV (see
"TV
System (NTSC/PAL conversion)" on page 15).
Do not use any non-standard shaped discs (heart,
etc.).
Do not use discs that have tape, scales, orpaste on
them or damage
to
the unit may result.
Do not use discs with surfaces printed by a
commercial label printer.
Some DVD discs require specificfeatures or allow
only limitedfunction during playback.
Prohibited mark may appear on the TVscreen
to
indicate that afunction is unavailable.
Photo
CD,
CD-ROM, DVD-ROM, DVD-RAM, CDV
and nonstandard CD discs cannot be played on this
unit.
SA-CD
Audio
CD MP3
(Super
Audio
CD)
~
~
~
Manufactured under license from
Dolby Laboratories.
"Dolby", "Pro Logic", and the
double-Dsymbol are trademarks
of
Dolby Laboratories.
"DTS" and "DTS Digital Surround"
are registered trademarks
of
Digital
Theater Systems, Inc.
"DCDi" is atrademark
of
Faroudja, a
division
of
Genesis Microchip, Inc.
[][]
I
DOLBY
I
DIGITAL
'4;"""9
1+
.•
IDCDfMI
byFAROUDJA
Iftf!'
SURROUND
£
Q!.DEO
~CD
[Q]D1i~@
DIGITAL AUDIO
[Q]D~@
DIGITAL AUDIO
~
2
Introduction
This manual refers to disc types using the following
symbols:
Thank you for purchasing the YAMAHA DVD
AUDIONIDEO
SA-CD player. This Owner's Manual
explains its basic operations. DVD-Audio DVD-Video Video
CD*1
This unit can play the disc types associated with the
logos shown below. (Do not attempt to load any other
type
of
disc into the unit, or the unit may be damaged.)
2re~~~~
I.
--
--
~,.
V
IDE
0 R
~.~~.@~D
SUPER
AUDIO
CD
Hornl™
HDMI, the HDMI logo and High-
H,GHDEFINITIONMULTIMEDIAINTERFACE
Definition Multimedia Interface are
trademarks orregistered trademark
of
HDMI Licensing LLC.
This product incorporates copyright protection
technology thatis protectedby method claims
of
certain
u.S.
patents andotherintellectual property rights owned
by Macrovision Corporation and other rights owners.
Use
of
this copyright protection technology must be
authorizedby Macrovision Corporation, and is intended
for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
"i.LINK" and the "i.LINK" logo iare trademarks
of
Sony Corporation.
This product complies with the following i.LINK
interface specifications:
1.
IEEE Std 1394a-2000, Standard for aHigh
Performance Serial Bus
2.
Audio and Music Data Transmission Protocol 2.1
Following the standardfor AM824 sequence adaptation
layers, the product is compatible with IEC60958
bitstream, DVD-A and SA-CD media.
*1
~
icon includes Super Video CD.
Notes:
-This unit
is
designedfor use with SA-CD, DVD-
Video, DVD-Audio, Video
CD,
Super Video
CD,
Audio
CD,
CD-R and CD-RW(MP3 and
IPEG
supported), DVD+R and DVD+RW, DVD-R and
DVD-RW.
-CD-R andCD-RWdiscs cannotbeplayedunless they
have beenfinalized.
DVD+R and DVD+RWdiscs cannot be played
unless they have beenfinalized.
DVD-R and DVD-RWdiscs must be recorded in
Video format and must befinalized.
Some discs cannot be played depending on disc
characteristics or recording conditions.
Be sure
to
use only CD-R and CD-RWdiscs from
reliable manufacturers.
Dolby Digital, DTS Digital Surround, and MPEG
digital audio are supported.
PAL andNTSC are supported.
This unitfeatures the PAL and NTSC video system
convertingfunction
to
allow you watching the
different types
of
video discs on one TV (see
"TV
System (NTSC/PAL conversion)" on page 15).
Do not use any non-standard shaped discs (heart,
etc.).
Do not use discs that have tape, scales, orpaste on
them or damage
to
the unit may result.
Do not use discs with surfaces printed by a
commercial label printer.
Some DVD discs require specificfeatures or allow
only limitedfunction during playback.
Prohibited mark may appear on the TVscreen
to
indicate that afunction is unavailable.
Photo
CD,
CD-ROM, DVD-ROM, DVD-RAM, CDV
and nonstandard CD discs cannot be played on this
unit.
SA-CD
Audio
CD MP3
(Super
Audio
CD)
~
~
~
Manufactured under license from
Dolby Laboratories.
"Dolby", "Pro Logic", and the
double-Dsymbol are trademarks
of
Dolby Laboratories.
"DTS" and "DTS Digital Surround"
are registered trademarks
of
Digital
Theater Systems, Inc.
"DCDi" is atrademark
of
Faroudja, a
division
of
Genesis Microchip, Inc.
[][]
I
DOLBY
I
DIGITAL
'4;"""9
1+
.•
IDCDfMI
byFAROUDJA
Iftf!'
SURROUND
£
Q!.DEO
~CD
[Q]D1i~@
DIGITAL AUDIO
[Q]D~@
DIGITAL AUDIO
~
2
The unit is designed to support the Region Management
System. Check the regional code number on the disc
package. Ifthe number does not match the unit's region
number (see table below, or see back
of
unit), the unit
may be unable to play the disc.
Introduction
Insert the batteries in the correct direction by aligning
the "+" and
"-"
marks on the batteries with the polarity
markings "+" and
"-"
inside the battery compartment.
Model
U.S.A. model
U.K. and
Europe models
Region
number of
the unit
Discs that can be
played (Example)
1Remove the back cover.
2Insert the two supplied batteries (AA, R6, UM-3) into
the battery compartment.
3Close the back cover.
Check your package to make sure it contains the
following items:
Remote control Batteries (x2) (AA,
R6,
UM-3)
OYAMAHA
Replace worn batteries
Wom
batteries limit the operating range
of
the remote
control. Replace both batteries at the same time.
•Replace both batteries
if
you notice adecrease in the
operating range
of
the remote control.
•Do not use old batteries with new ones.
•Do not use different types
of
batteries (such as
alkaline and manganese) together. Read the battery
packaging carefully. Different types
of
batteries may
be the same shape or color.
•If the batteries leak, dispose
of
them immediately.
Avoid touching the leaked material or letting it come
into contact with clothing, etc. Clean the battery
compartment thoroughly before installing new
batteries.
AudioNideo cable Power cable
3
The unit is designed to support the Region Management
System. Check the regional code number on the disc
package. Ifthe number does not match the unit's region
number (see table below, or see back
of
unit), the unit
may be unable to play the disc.
Introduction
Insert the batteries in the correct direction by aligning
the "+" and
"-"
marks on the batteries with the polarity
markings "+" and
"-"
inside the battery compartment.
Model
U.S.A. model
U.K. and
Europe models
Region
number of
the unit
Discs that can be
played (Example)
1Remove the back cover.
2Insert the two supplied batteries (AA, R6, UM-3) into
the battery compartment.
3Close the back cover.
Check your package to make sure it contains the
following items:
Remote control Batteries (x2) (AA,
R6,
UM-3)
OYAMAHA
Replace worn batteries
Wom
batteries limit the operating range
of
the remote
control. Replace both batteries at the same time.
•Replace both batteries
if
you notice adecrease in the
operating range
of
the remote control.
•Do not use old batteries with new ones.
•Do not use different types
of
batteries (such as
alkaline and manganese) together. Read the battery
packaging carefully. Different types
of
batteries may
be the same shape or color.
•If the batteries leak, dispose
of
them immediately.
Avoid touching the leaked material or letting it come
into contact with clothing, etc. Clean the battery
compartment thoroughly before installing new
batteries.
AudioNideo cable Power cable
3
Introduction
L.-.-II.......
....
00 0
000
Point the remote control at the
sensor, within approximately 6 m
(20 feet)
of
the unit.
Handling the remote control
Do not spill water or other liquids on the remote
control.
Do not drop the remote control.
Do not leave or store the remote control in the
following types
of
conditions:
-high humidity such
as
near abath
-high temperature such
as
near aheater or stove
-extremely low temperature
-dusty places
Cleaning the cabinet
Use asoftcloth slightly moistened with amilddetergent
solution. Do not use asolution that contains alcohol,
spirits, ammonia or abrasives.
Cleaning discs
When adisc becomes dirty, clean it with acleaning
cloth. Wipe the disc from the center out. Do not wipe in
acircular motion.
Do not use solvents such
as
benzene, thinner,
commercial cleaners, or anti-static spray designed for
analog records.
4
Introduction
L.-.-II.......
....
00 0
000
Point the remote control at the
sensor, within approximately 6 m
(20 feet)
of
the unit.
Handling the remote control
Do not spill water or other liquids on the remote
control.
Do not drop the remote control.
Do not leave or store the remote control in the
following types
of
conditions:
-high humidity such
as
near abath
-high temperature such
as
near aheater or stove
-extremely low temperature
-dusty places
Cleaning the cabinet
Use asoftcloth slightly moistened with amilddetergent
solution. Do not use asolution that contains alcohol,
spirits, ammonia or abrasives.
Cleaning discs
When adisc becomes dirty, clean it with acleaning
cloth. Wipe the disc from the center out. Do not wipe in
acircular motion.
Do not use solvents such
as
benzene, thinner,
commercial cleaners, or anti-static spray designed for
analog records.
4
Functional Overview
tray
to the previous chapter or track
to the next chapter or track
o
-stops
DlaVb(lcK
DD
-pauses
Dlavb(lcK
-starts
nlavh:lck
DVD-AUDIO indicator
-lights
up when the unit detects DVD-Audio
signals
SA-CD indicator
-lights
up when the unit detects SA-CD signals
MULTI
CH
indicator
-lights
up when you play multi-channel audio
source
HDMI indicator
-lights
up when the unit is capable
of
outputting
signals from the HDMI (High Definition
Multimedia Interface) terminal
LLINK indicator
-lights
up when an AV receiver selects i.LINK
(1EEE1394)
Front panel display
-shows information about the
operational status
of
the unit
PROGRESSIVE indicator
-lights up when the unit enters
PROGRESSIVE mode
AUDIO DIRECT indicator
-lights up when you enter the AUDIO
DIRECT mode by pressing the AUDIO
DIRECT button on the remote control
during audio disc playback
DOWN MIX indicator
-lights up when you play the discs that
allow down mixing
of
the multi-channel
audio sources
~
OPEN/CLOSE
-opens or closes the disc tray
5
Functional Overview
tray
to the previous chapter or track
to the next chapter or track
o
-stops
DlaVb(lcK
DD
-pauses
Dlavb(lcK
-starts
nlavh:lck
DVD-AUDIO indicator
-lights
up when the unit detects DVD-Audio
signals
SA-CD indicator
-lights
up when the unit detects SA-CD signals
MULTI
CH
indicator
-lights
up when you play multi-channel audio
source
HDMI indicator
-lights
up when the unit is capable
of
outputting
signals from the HDMI (High Definition
Multimedia Interface) terminal
LLINK indicator
-lights
up when an AV receiver selects i.LINK
(1EEE1394)
Front panel display
-shows information about the
operational status
of
the unit
PROGRESSIVE indicator
-lights up when the unit enters
PROGRESSIVE mode
AUDIO DIRECT indicator
-lights up when you enter the AUDIO
DIRECT mode by pressing the AUDIO
DIRECT button on the remote control
during audio disc playback
DOWN MIX indicator
-lights up when you play the discs that
allow down mixing
of
the multi-channel
audio sources
~
OPEN/CLOSE
-opens or closes the disc tray
5
Functional Overview
output terminal
-C{lnnlp.(~r
to the HDMI jack on a
LU1VII--COmtlatlble
AV component
MODE switch
- s
'WlLCnt~S
the component video output
between progressive and
COAXIAL digital audio output
-connect
to the audio input
jack
on
digital (coaxial) audio equipment
SVIDEO output
-connect to an S-Video input
jack
on
your AV receiver
VIDEO output (composite video
out)
-connect
to the videoinput
jack
on your
AV receiver
RS-232C terminal
-use as an expansion terminal for commercial use
Consult your dealer for details
REMOTE CONTROL connectors
-use in custom installations to transmit remote
control signals via cable connections
i.LINK connectors
-connect to the i.LINK
jack
on an
i.LINK-compatible component
OPTICAL digital audio output jack
-connect to the audio input
jack
on digital
(optical) audio equipment
MIXED 2CH audio output jacks
-connect to audio inputs on your AV receiver
or stereo system
6CH DISCRETE audio output jacks
-connect to an AV receiver with 6-ch discrete
audio inputjacks
AC
IN
(Main-inlet)
-connect to astandard AC outlet
1-------'
Remote control connectors are used in custom installations to transmit remote control signals via cable.
•Connect REMOTE CONTROL IN to an output on your remote control system.
•Connect REMOTE CONTROL OUT to aremote control input on another component to enable system control.
This unit is also equipped with RS-232C terminal. Consult your dealer for details.
Caution: Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause
permanent damage to the unit.
6
Functional Overview
output terminal
-C{lnnlp.(~r
to the HDMI jack on a
LU1VII--COmtlatlble
AV component
MODE switch
- s
'WlLCnt~S
the component video output
between progressive and
COAXIAL digital audio output
-connect
to the audio input
jack
on
digital (coaxial) audio equipment
SVIDEO output
-connect to an S-Video input
jack
on
your AV receiver
VIDEO output (composite video
out)
-connect
to the videoinput
jack
on your
AV receiver
RS-232C terminal
-use as an expansion terminal for commercial use
Consult your dealer for details
REMOTE CONTROL connectors
-use in custom installations to transmit remote
control signals via cable connections
i.LINK connectors
-connect to the i.LINK
jack
on an
i.LINK-compatible component
OPTICAL digital audio output jack
-connect to the audio input
jack
on digital
(optical) audio equipment
MIXED 2CH audio output jacks
-connect to audio inputs on your AV receiver
or stereo system
6CH DISCRETE audio output jacks
-connect to an AV receiver with 6-ch discrete
audio inputjacks
AC
IN
(Main-inlet)
-connect to astandard AC outlet
1-------'
Remote control connectors are used in custom installations to transmit remote control signals via cable.
•Connect REMOTE CONTROL IN to an output on your remote control system.
•Connect REMOTE CONTROL OUT to aremote control input on another component to enable system control.
This unit is also equipped with RS-232C terminal. Consult your dealer for details.
Caution: Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause
permanent damage to the unit.
6
Functional Overview
DIMMER
-adjusts
the display brightness
AUDIO DIRECT
-switches video output on and off
during audio disc playback
PAGE
-turns
pages
of
the DVD-Audio still
pictures
TITLE/CHAP
-selects title or chapter
SOUND MODE
-selects the required sound mode
•for SA-CD: CD, Stereo, or Multi-
channel (ifavailable)
•for
DVDNCD:
Stereo, Dolby
Surround compatible, 3D sound, or
Multi-channel
SCAN
-plays the first
10
seconds
of
each
track/chapter within adisc
STOP
(0)
-stops playback
STATUS
-displays currentplaybackinformation
on the front panel display and on the
status window on screen
ON SCREEN
-accesses or removes the player's On-
screen menu
PAUSE
(DD)
-pauses
playback temporarily/
frame-by-frame playback
PLAY (C»
-starts playback
REPEAT
-repeats
chapter, track, title, disc, etc.
DVD
_YAMAHA
1<1<1
-searches backward*/accesses a
previous chapter or track
ZOOM
-enlarges video images
ANGLE
-selects DVD camera angles
1>1>1
-searches forward*/accesses the
next chapter or track
SUBTITLE
-selects subtitle languages
0-9 numeric buttons
ENTER/OK
-acknowledges menu selection
RETURN/RESUME
-displays the previous menu or
resumes playback
MENU
-accesses the menu
of
aDVD disc
(91
I
-turns the power
of
this unit ON or
enters standby mode
/1
V-<:]
C>
-(left/right/up/down) selects an item
in the menu
AUDIO
-selects audio languages and formats
A-B
-repeats
aspecific segment
SHUFFLE
-plays tracks/chapter in random order
PROG
-turns program playback on or off
•available only when aprogrammed
playlist has been created
*Press and hold button
for
about two seconds.
7
Functional Overview
DIMMER
-adjusts
the display brightness
AUDIO DIRECT
-switches video output on and off
during audio disc playback
PAGE
-turns
pages
of
the DVD-Audio still
pictures
TITLE/CHAP
-selects title or chapter
SOUND MODE
-selects the required sound mode
•for SA-CD: CD, Stereo, or Multi-
channel (ifavailable)
•for
DVDNCD:
Stereo, Dolby
Surround compatible, 3D sound, or
Multi-channel
SCAN
-plays the first
10
seconds
of
each
track/chapter within adisc
STOP
(0)
-stops playback
STATUS
-displays currentplaybackinformation
on the front panel display and on the
status window on screen
ON SCREEN
-accesses or removes the player's On-
screen menu
PAUSE
(DD)
-pauses
playback temporarily/
frame-by-frame playback
PLAY (C»
-starts playback
REPEAT
-repeats
chapter, track, title, disc, etc.
DVD
_YAMAHA
1<1<1
-searches backward*/accesses a
previous chapter or track
ZOOM
-enlarges video images
ANGLE
-selects DVD camera angles
1>1>1
-searches forward*/accesses the
next chapter or track
SUBTITLE
-selects subtitle languages
0-9 numeric buttons
ENTER/OK
-acknowledges menu selection
RETURN/RESUME
-displays the previous menu or
resumes playback
MENU
-accesses the menu
of
aDVD disc
(91
I
-turns the power
of
this unit ON or
enters standby mode
/1
V-<:]
C>
-(left/right/up/down) selects an item
in the menu
AUDIO
-selects audio languages and formats
A-B
-repeats
aspecific segment
SHUFFLE
-plays tracks/chapter in random order
PROG
-turns program playback on or off
•available only when aprogrammed
playlist has been created
*Press and hold button
for
about two seconds.
7
Preparation
•There are various ways to connectthe player, depending
on the equipment you wish to use. The following
drawings illustrate some possible configurations.
Pleasereferto manuals for otherequipment as necessary
to ensure that you make the correct connections.
Do not connect the player via your VCR. The video
quality couldbe distorted by the copy protection system.
Do not connect the player's audio output
jack
to the
phono input
jack
on your audio system.
Digital audio connections
This unit features COAXIAL and OPTICAL digital
outputjacks. Connect one or both
of
them to digital
inputjacks
of
an AV receiver. You can also enjoy high-
quality stereo sound at sampling frequencies
of
88.2 and
96 kHz, assuming the material is notcopy-protected and
the equipment you connect is compatible with these
signals.
Notes:
-
If
the audioformat
of
the digital output does not
match the capabilities
of
your receiver, the receiver
willproduce astrong, distorted sound
or
no sound
at
all. Make sure to selectthe appropriate audioformat
on the disc menu screen. Pressing
AUDIO
once
or
more may change not only the audio language but
also the audioformat. The selectedformat name will
be displayed
for
several seconds in the status
window.
SA-CD audio signal is not outputfrom DIGITAL
OUTjacks.
If
you wish to enjoy Dolby Digital, DTS, andMPEG
you must connect this unit to the AV receiver that
support those.
8
i.LINK components connections
Use an i.LINK connection cable
of
approximately
3m
(10 feet) or less to connect this unit to i.LINK-
compatible components (refer to page
18
for details).
Analog audio (6CH DISCRETE)
connection
Connect areceiver with multi-channel audio input
terminals to enjoy surround sound with no sampling
frequency limitation. We recommend this connection to
obtain maximum performance
of
SA-CD discs and
DVD-Audio multi-channel sound.
Preparation
•There are various ways to connectthe player, depending
on the equipment you wish to use. The following
drawings illustrate some possible configurations.
Pleasereferto manuals for otherequipment as necessary
to ensure that you make the correct connections.
Do not connect the player via your VCR. The video
quality couldbe distorted by the copy protection system.
Do not connect the player's audio output
jack
to the
phono input
jack
on your audio system.
Digital audio connections
This unit features COAXIAL and OPTICAL digital
outputjacks. Connect one or both
of
them to digital
inputjacks
of
an AV receiver. You can also enjoy high-
quality stereo sound at sampling frequencies
of
88.2 and
96 kHz, assuming the material is notcopy-protected and
the equipment you connect is compatible with these
signals.
Notes:
-
If
the audioformat
of
the digital output does not
match the capabilities
of
your receiver, the receiver
willproduce astrong, distorted sound
or
no sound
at
all. Make sure to selectthe appropriate audioformat
on the disc menu screen. Pressing
AUDIO
once
or
more may change not only the audio language but
also the audioformat. The selectedformat name will
be displayed
for
several seconds in the status
window.
SA-CD audio signal is not outputfrom DIGITAL
OUTjacks.
If
you wish to enjoy Dolby Digital, DTS, andMPEG
you must connect this unit to the AV receiver that
support those.
8
i.LINK components connections
Use an i.LINK connection cable
of
approximately
3m
(10 feet) or less to connect this unit to i.LINK-
compatible components (refer to page
18
for details).
Analog audio (6CH DISCRETE)
connection
Connect areceiver with multi-channel audio input
terminals to enjoy surround sound with no sampling
frequency limitation. We recommend this connection to
obtain maximum performance
of
SA-CD discs and
DVD-Audio multi-channel sound.
Analog audio (MIXED 2CH)
connection
Use the audio cable supplied with the player to connect
AUDIO OUTL(left) and R(right) jacks
of
the playerto
the corresponding inputjacks on your audio equipment,
such as an AV receiver.
If
yourAV receiverfeatures video outputjacks, connect
this unit to the AV receiver (and then to your TV). This
enables you to use one TV for several different video
sources (LD, VCR etc.) by simply switching the input
source selector on your AV receiver.
This unit features three types
of
video output jacks
(Component, Video and S-Video). Connect the
appropriate video output
jack
to your equipment.
Preparation
HDMI component connections
Use the HDMI connection cable to connect this unit to
HDMI-compatible components.
Note:
-You can use aHDMI to
DVI
conversion cable
to
connect this unit to DVI HDCP compatible
components. In this case, no audio signals are output
from this unit'sjacks.
9
Analog audio (MIXED 2CH)
connection
Use the audio cable supplied with the player to connect
AUDIO OUTL(left) and R(right) jacks
of
the playerto
the corresponding inputjacks on your audio equipment,
such as an AV receiver.
If
yourAV receiverfeatures video outputjacks, connect
this unit to the AV receiver (and then to your TV). This
enables you to use one TV for several different video
sources (LD, VCR etc.) by simply switching the input
source selector on your AV receiver.
This unit features three types
of
video output jacks
(Component, Video and S-Video). Connect the
appropriate video output
jack
to your equipment.
Preparation
HDMI component connections
Use the HDMI connection cable to connect this unit to
HDMI-compatible components.
Note:
-You can use aHDMI to
DVI
conversion cable
to
connect this unit to DVI HDCP compatible
components. In this case, no audio signals are output
from this unit'sjacks.
9
Preparation
SCAN MODE selector
This selector switches the type
of
output signal from the
COMPONENT video jacks on this unit.
INTERLACE:
Select INTERLACE
if
you are connecting the
component to astandard (interlace format) TV.
PROGRESSIVE:
Select PROGRESSIVE
if
your
TV
accepts NTSC
progressive or PAL progressive signals. This setting
will enable you to enjoy accurate colorreproduction and
high quality images. This unit features DCDi circuit.
The PROGRESSIVE indicator on the front panel lights
up during progressive playback.
Notes:
-In the PROGRESSIVE mode, 4:3 aspect images are
stretched horizontally on the wide screen
TV.
We
recommend to change the TV screen's aspect ratio
settings
for
progressive signals ifyou wish to watch
the original aspect ratio images without distortion.
You can also change the aspect ratio settings in the
[4:
3Aspect]parameter in the On-screen menu.
Some TVs andprojectors are notcompatible with this
unit.
If
you notice picture distortion when outputting
the progressive signals, switch the
SCAN
MODE
selector to INTERLACE.
CONSUMERS SHOULD NOTE THAT
NOT
ALL
HIGH DEFINITION TELEVISION SETS ARE
FULLY COMPATIBLE WITH THIS PRODUCT
AND
MAY
CAUSE ARTIFACTS
TO
BE
DISPLAYED IN THE PICTURE. IN CASE
OF
525
OR.
625 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS RECOMMENDED
THAT
THE
USER SWITCH THE CONNECTION
TO
THE
"STANDARD DEFINITION" OUTPUT.
IF
THERE
ARE
QUESTIONS REGARDING
OUR
VIDEO
MONITOR COMPATIBILITY WITH THIS
MODEL 525P AND 625P DVD PLAYER, PLEASE
CONTACT
OUR
CUSTOMER SERVICE CENTER.
This unit is compatible with the complete line
of
YAMAHA products, including the projectors
DPX-lOOO, DPX-llOO, LPX-500,
LPX-5l0,
the
plasma monitor
PDM-l
and
PDM-42l0.
10
1Connect the AC power cord to the power outlet.
2Switch on the
TV
and this unit.
3Set the
TV
to the correct Video
IN
channel. (e.g.
EXTl,
EXT2,
AVl,
AV2,
AUDIONIDEO,
etc. Refer to your
TV
owner's manual for detail.)
...
The front panel display lights up and the default
screen appears on the TV.
4
If
you are using an external equipment (e.g. audio
system or receiver),
tum
them on and select the
appropriate input source that was used to connectto this
unit. Refer to the equipment owner's manual for detail.
Note:
-
If
you do nothave aproperpicture
or
sound, refer to
"Troubleshooting" section.
We
recommend to setup some
of
the basic menu items
before the initial playback.
c!>/I----l----i
;-------,.
1---:---
Li
\7
<I
l>
ON SCREEN
1Press STANDBY/ON
c!>/I
to
tum
on the unit.
2Press
ON
SCREEN.
...
On-screen menu is displayed on the screen.
3Follow the procedure described below to set the
following menu items.
Preparation
SCAN MODE selector
This selector switches the type
of
output signal from the
COMPONENT video jacks on this unit.
INTERLACE:
Select INTERLACE
if
you are connecting the
component to astandard (interlace format) TV.
PROGRESSIVE:
Select PROGRESSIVE
if
your
TV
accepts NTSC
progressive or PAL progressive signals. This setting
will enable you to enjoy accurate colorreproduction and
high quality images. This unit features DCDi circuit.
The PROGRESSIVE indicator on the front panel lights
up during progressive playback.
Notes:
-In the PROGRESSIVE mode, 4:3 aspect images are
stretched horizontally on the wide screen
TV.
We
recommend to change the TV screen's aspect ratio
settings
for
progressive signals ifyou wish to watch
the original aspect ratio images without distortion.
You can also change the aspect ratio settings in the
[4:
3Aspect]parameter in the On-screen menu.
Some TVs andprojectors are notcompatible with this
unit.
If
you notice picture distortion when outputting
the progressive signals, switch the
SCAN
MODE
selector to INTERLACE.
CONSUMERS SHOULD NOTE THAT
NOT
ALL
HIGH DEFINITION TELEVISION SETS ARE
FULLY COMPATIBLE WITH THIS PRODUCT
AND
MAY
CAUSE ARTIFACTS
TO
BE
DISPLAYED IN THE PICTURE. IN CASE
OF
525
OR.
625 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS RECOMMENDED
THAT
THE
USER SWITCH THE CONNECTION
TO
THE
"STANDARD DEFINITION" OUTPUT.
IF
THERE
ARE
QUESTIONS REGARDING
OUR
VIDEO
MONITOR COMPATIBILITY WITH THIS
MODEL 525P AND 625P DVD PLAYER, PLEASE
CONTACT
OUR
CUSTOMER SERVICE CENTER.
This unit is compatible with the complete line
of
YAMAHA products, including the projectors
DPX-lOOO, DPX-llOO, LPX-500,
LPX-5l0,
the
plasma monitor
PDM-l
and
PDM-42l0.
10
1Connect the AC power cord to the power outlet.
2Switch on the
TV
and this unit.
3Set the
TV
to the correct Video
IN
channel. (e.g.
EXTl,
EXT2,
AVl,
AV2,
AUDIONIDEO,
etc. Refer to your
TV
owner's manual for detail.)
...
The front panel display lights up and the default
screen appears on the TV.
4
If
you are using an external equipment (e.g. audio
system or receiver),
tum
them on and select the
appropriate input source that was used to connectto this
unit. Refer to the equipment owner's manual for detail.
Note:
-
If
you do nothave aproperpicture
or
sound, refer to
"Troubleshooting" section.
We
recommend to setup some
of
the basic menu items
before the initial playback.
c!>/I----l----i
;-------,.
1---:---
Li
\7
<I
l>
ON SCREEN
1Press STANDBY/ON
c!>/I
to
tum
on the unit.
2Press
ON
SCREEN.
...
On-screen menu is displayed on the screen.
3Follow the procedure described below to set the
following menu items.
G)Menu Language (see page 17)
You can select the language displayed in the On-screen
menu.
1Go to [Menu Language] (Setup
-+
Language
-+
Menu
Language) by using
/1
V
<::::]
t:>
buttons on the remote
control, then press
t:>.
..
Choices are displayed on the right column.
2Selectalanguage to be displayed in the On-screen menu
by using
/1
Vbuttons.
3Press
<::::]
to return to the previous menu.
®Default
Audio (see page 17)
Youcan select the audio language spokenin video discs.
Available choices are determined by the disc.
1Go to [Default Audio] (Setup
-+
Language
-+
Default
Audio) by using
/1
V
<::::]
t:>
buttons on the remote
control, then press
t:>.
..
Choices are displayed on the right column.
2Select alanguage by using
/1
Vbuttons.
3Press
<::::]
to return to the previous menu.
@Default Sub-title (see page 17)
You can select the subtitle language set as default.
Available choices are determined by the disc.
Go to [Default Sub-title] (Setup
-+
Language
-+
Default
sub-title) by using
/1
V
<::::]
t:>
buttons on the remote
control, then press
t:>.
..
Choices are displayed on the right column.
2Select adefault subtitle language by using
/1
Vbuttons.
3Press
<::::]
to return to the previous menu.
@TV
shape (see page 15)
You can select the aspect ratio
of
the video displayed on
the TV monitor.
Select [Widescreen]
if
you connect to awide-screen
monitor.
If
you connect to aconventional monitor,
select [4:3 panscan] (the left and right sides are trimmed
when you play 16:9 video) or [4:3 letterbox] (black ·
areas appear at the top and bottom when you play 16:9
video).
1Go to [TV shape] (Setup
-+
TV
-+
TV shape) by using
/1
V
<::::]
t:>
buttons on the remote control, then press
t:>
.
...
Choices are displayed on the right column.
2Make achoice by using
/1
Vbuttons.
3Press
<::::]
to return to the previous menu.
Preparation
@Analog output (see page 16)
Enables you to specify the type
of
analog output suitable
for your AV receiver. Select [Multi-channel]
if
you are
using amulti-channel AV receiver with 6-ch discrete
inputs.
If
your AV receiver does not have 6-ch discrete
inputs, select one
of
[Stereo], [Dolby
SUIT
Compat], or
[3D sound].
Go to [Analog output] (Setup
-+
Audio Menu
-+
Analog
output) by using
/1
V
<::::]
t:>
buttons on the remote
control, then press
t:>
.
...
Choices are displayed on the right column.
2Select an item for the analog output signal by using
/1
V
buttons.
3Press
<::::]
to return to the previous menu.
@Digital output (see page 16)
Enables you to specify the type
of
digital output suitable
for your AV receiver. Select [PCM only]
if
your AV
receiver is not capable
of
decoding multi-channel audio.
Select [All]
if
you connected this unit's digital outjacks
to amulti-channel AV receiver.
1Go to [Digital output] (Setup
-+
Audio Menu
-+
Digital
output) by using
/1
V
<::::]
t:>
buttons on the remote
control, then press
t:>.
...
Choices are displayed on the right column.
2Select an item for the digital output signal by using
/1
V
buttons.
3Press
<::::]
to return to the previous menu.
Notes:
-Press
ON
SCREENagain to
exitfrom
the On-screen
menu.
-You canfind the selection
of
the helpful menu items
in [PreferenceJand [Setup].
Go to [PreferenceJ
if
you want to customize this unit
for
yourpersonal requirement such as the Wake-up
timer.
Go to [SetupJ
if
you wantto setthe operationalstatus
of
this unit.
11
G)Menu Language (see page 17)
You can select the language displayed in the On-screen
menu.
1Go to [Menu Language] (Setup
-+
Language
-+
Menu
Language) by using
/1
V
<::::]
t:>
buttons on the remote
control, then press
t:>.
..
Choices are displayed on the right column.
2Selectalanguage to be displayed in the On-screen menu
by using
/1
Vbuttons.
3Press
<::::]
to return to the previous menu.
®Default
Audio (see page 17)
Youcan select the audio language spokenin video discs.
Available choices are determined by the disc.
1Go to [Default Audio] (Setup
-+
Language
-+
Default
Audio) by using
/1
V
<::::]
t:>
buttons on the remote
control, then press
t:>.
..
Choices are displayed on the right column.
2Select alanguage by using
/1
Vbuttons.
3Press
<::::]
to return to the previous menu.
@Default Sub-title (see page 17)
You can select the subtitle language set as default.
Available choices are determined by the disc.
Go to [Default Sub-title] (Setup
-+
Language
-+
Default
sub-title) by using
/1
V
<::::]
t:>
buttons on the remote
control, then press
t:>.
..
Choices are displayed on the right column.
2Select adefault subtitle language by using
/1
Vbuttons.
3Press
<::::]
to return to the previous menu.
@TV
shape (see page 15)
You can select the aspect ratio
of
the video displayed on
the TV monitor.
Select [Widescreen]
if
you connect to awide-screen
monitor.
If
you connect to aconventional monitor,
select [4:3 panscan] (the left and right sides are trimmed
when you play 16:9 video) or [4:3 letterbox] (black ·
areas appear at the top and bottom when you play 16:9
video).
1Go to [TV shape] (Setup
-+
TV
-+
TV shape) by using
/1
V
<::::]
t:>
buttons on the remote control, then press
t:>
.
...
Choices are displayed on the right column.
2Make achoice by using
/1
Vbuttons.
3Press
<::::]
to return to the previous menu.
Preparation
@Analog output (see page 16)
Enables you to specify the type
of
analog output suitable
for your AV receiver. Select [Multi-channel]
if
you are
using amulti-channel AV receiver with 6-ch discrete
inputs.
If
your AV receiver does not have 6-ch discrete
inputs, select one
of
[Stereo], [Dolby
SUIT
Compat], or
[3D sound].
Go to [Analog output] (Setup
-+
Audio Menu
-+
Analog
output) by using
/1
V
<::::]
t:>
buttons on the remote
control, then press
t:>
.
...
Choices are displayed on the right column.
2Select an item for the analog output signal by using
/1
V
buttons.
3Press
<::::]
to return to the previous menu.
@Digital output (see page 16)
Enables you to specify the type
of
digital output suitable
for your AV receiver. Select [PCM only]
if
your AV
receiver is not capable
of
decoding multi-channel audio.
Select [All]
if
you connected this unit's digital outjacks
to amulti-channel AV receiver.
1Go to [Digital output] (Setup
-+
Audio Menu
-+
Digital
output) by using
/1
V
<::::]
t:>
buttons on the remote
control, then press
t:>.
...
Choices are displayed on the right column.
2Select an item for the digital output signal by using
/1
V
buttons.
3Press
<::::]
to return to the previous menu.
Notes:
-Press
ON
SCREENagain to
exitfrom
the On-screen
menu.
-You canfind the selection
of
the helpful menu items
in [PreferenceJand [Setup].
Go to [PreferenceJ
if
you want to customize this unit
for
yourpersonal requirement such as the Wake-up
timer.
Go to [SetupJ
if
you wantto setthe operationalstatus
of
this unit.
11
On-screen menu
The On-screen menu enables you to customize this unit
to suit your requirements.
Press ON SCREEN on the remote control.
...
The On-screen menu appears on the screen.
•Program
4Preferences •View
•Toolbar ..j •Play Option
•Setup •Search
•Slide Show
e3
Toolbar
2Press!1 V
-<::J
I>
to navigate the On-screen menu and to
change the settings.
3Press ON SCREEN
to
exit from the On-screen menu.
Features
Dimmer
Adjusts the brightness
of
the front panel display.
You can use this function
if
the brightness
of
the front
panel display disturbs your enjoyment
of
the home
theater.
Choices: Low, Medium, Normal
Initial setting: Normal
Wake up timer
Turns on the player from standby mode after apreset
amount
of
time. The timer
is
then reset to zero. You can
set the timer for up to 600 minutes.
Choices: 0to 600 minutes
Initial setting: 0
Status window
Displays the current status
of
the player. Select [Off] to
suppress display
of
the Status window.
Choices: On,
Off
Initial setting: On
12
Adv.Picture
Allows you to fine-tune the following video parameters.
4:3 Aspect
You can adjust the aspect ratio
of
the projected images
on the screen. This function is only available for
progressive scan and HDMI video output.
Select [NL_Stretch] for display
of
4:3 image on the 16:9
screen with non-linear stretching (Center position
of
screen is stretch less than the side).
Select [4:3 PillarBox] to display 4:3 image on the 16:9
screen without stretching. Even when playing adisc
recorded in the 16:9 squeeze mode, the picture is
displayed in the center
of
the screen.
No aspect ratio adjustment is made when [Auto] is
selected.
Werecommend setting the aspect ratio on yourTV
if
the
function is available.
Choices: 4:3 PillarBox, NL_Stretch, Auto
Initial setting: Auto
TrueLife
Produces more dynamic picture by increasing the
picture contrast and the color intensity. This function is
available for progressive scan output only.
Choices: 0to +7
Initial setting: 0
DCDi
DCDi (Directional Correction Deinterlacing) computes
and tracks the angle
of
the screen edge to fill in the
missing pixel on the TV screen. DCDi will optimize the
image quality significantly, especially during the slow
motion playback. This function is available for
progressive scan output only.
Choices: On,
Off
Initial setting: On
Chroma Delay
The chroma (color) and luminance (brightness) signals
are not synchronized. The Chroma Delay setting allows
you to adjust the advance delay
of
the chroma signal to
yield aperfectly clearpicture. This function is available
for signals output from COMPONENT video jacks
only.
Choices:
-3
to
+3
Initial setting: 0
Gamma
Enables you to adjust the intensity
of
the picture non-
linearly. Apositive value enables you to bring out low
level detail in dark scenes, while anegative value
emphasizes contrast. This function is available for
signals output from COMPONENT video jacks only.
Choices:
-7
to
+7
Initial setting: 0
On-screen menu
The On-screen menu enables you to customize this unit
to suit your requirements.
Press ON SCREEN on the remote control.
...
The On-screen menu appears on the screen.
•Program
4Preferences •View
•Toolbar ..j •Play Option
•Setup •Search
•Slide Show
e3
Toolbar
2Press!1 V
-<::J
I>
to navigate the On-screen menu and to
change the settings.
3Press ON SCREEN
to
exit from the On-screen menu.
Features
Dimmer
Adjusts the brightness
of
the front panel display.
You can use this function
if
the brightness
of
the front
panel display disturbs your enjoyment
of
the home
theater.
Choices: Low, Medium, Normal
Initial setting: Normal
Wake up timer
Turns on the player from standby mode after apreset
amount
of
time. The timer
is
then reset to zero. You can
set the timer for up to 600 minutes.
Choices: 0to 600 minutes
Initial setting: 0
Status window
Displays the current status
of
the player. Select [Off] to
suppress display
of
the Status window.
Choices: On,
Off
Initial setting: On
12
Adv.Picture
Allows you to fine-tune the following video parameters.
4:3 Aspect
You can adjust the aspect ratio
of
the projected images
on the screen. This function is only available for
progressive scan and HDMI video output.
Select [NL_Stretch] for display
of
4:3 image on the 16:9
screen with non-linear stretching (Center position
of
screen is stretch less than the side).
Select [4:3 PillarBox] to display 4:3 image on the 16:9
screen without stretching. Even when playing adisc
recorded in the 16:9 squeeze mode, the picture is
displayed in the center
of
the screen.
No aspect ratio adjustment is made when [Auto] is
selected.
Werecommend setting the aspect ratio on yourTV
if
the
function is available.
Choices: 4:3 PillarBox, NL_Stretch, Auto
Initial setting: Auto
TrueLife
Produces more dynamic picture by increasing the
picture contrast and the color intensity. This function is
available for progressive scan output only.
Choices: 0to +7
Initial setting: 0
DCDi
DCDi (Directional Correction Deinterlacing) computes
and tracks the angle
of
the screen edge to fill in the
missing pixel on the TV screen. DCDi will optimize the
image quality significantly, especially during the slow
motion playback. This function is available for
progressive scan output only.
Choices: On,
Off
Initial setting: On
Chroma Delay
The chroma (color) and luminance (brightness) signals
are not synchronized. The Chroma Delay setting allows
you to adjust the advance delay
of
the chroma signal to
yield aperfectly clearpicture. This function is available
for signals output from COMPONENT video jacks
only.
Choices:
-3
to
+3
Initial setting: 0
Gamma
Enables you to adjust the intensity
of
the picture non-
linearly. Apositive value enables you to bring out low
level detail in dark scenes, while anegative value
emphasizes contrast. This function is available for
signals output from COMPONENT video jacks only.
Choices:
-7
to
+7
Initial setting: 0
On-screen menu
480p
Picture
Video shift
Adjusts the position
of
the image on the screen by
scrolling it to the left or right.
Choices: +1 to +7
Initial setting: +4
Saturation
Adjusts the video color saturation. This function is not
available for signals output from COMPONENT video
jacks and HDMI video signals.
Choices:
-7
to +7
Initial setting: 0
Contrast
Accentuates bright and dark parts
of
the video. This
function is not available for signals output from
COMPONENT video jacks and HDMI video signals.
Choices:
-7
to +7
Initial setting: 0
Picture Mode
Adjusts the color tone to suit your preference and the
playing source. [Personal] will be chosen automatically
when you change the value in the following menus:
[Saturation], [Contrast], [Brightness], and [Sharpness].
This function is not available for signals output from
COMPONENT video jacks and HDMI video signals.
Choices: Rich, Natural, Soft, Animation, Personal
Initial setting: Natural
The resolution is automatically selected
to match the monitor you are using.
Auto
Squeezed16:9 Widescreen Auto
16:9 video
(Projector) 4:3 video Widescreen 4:3 PillarBox
*2
Squeezed16:9 4:3 panscan
or
video 4:3letterbox
4:3 4:3 panscan
4:3 video or
4:3letterbox
HDMI Video
Enables you to adjust the resolution depending on the
monitor you are using. You can use this function only
when the HDMI output terminal is connected to a
HDMI-compatible component.
Choices: 480p, 576p, 720p, 1080i, Auto
Initial setting: 480p
Setting Examples
576p Select the desired resolution for the
1-----
7
-2-
0p
----1
monitor you are using. *1
1080i
*:
Refer to the instruction manual
of
the monitor and
choose an appropriate aspect ratio.
*
1:
The HDMI video output may not be displayed
properly
if
the HDMI-compatible monitoryou are using
does not support the selected resolution setting.
To return to the initial setting, you must first stop
playback and eject the disc, then press "PLAY"
~
"0"
~
"2"
~
"9"
~
"STOP" on the remote control.
*2:
If
the desired aspect ratio is not available, select the
most suitable setting from [AUTO], [4:3 PillarBox] and
[NL_Stretch].
Notes:
-While HDMI video signals are being output,
component video output
is
unavailable.
-When avideo setting
is
modified, the picture may not
be displayed
for
several seconds.
-When the image conversion (PAL
+-+
NTSC) begins,
the picture may notbe displayedfor several seconds.
Brightness
Adjusts the overall brightness
of
the picture. This
function is not available for signals output from
COMPONENT video jacks and HDMI video signals.
Choices:
-7
to +7
Initial setting: 0
Sharpness
Adjusts the sharpness
of
the video. This function is not
available for video signals outputfrom the HDMI output
terminal and may have aweak effect on signals output
from the COMPONENT video jacks.
Choices: 0to +7
Initial setting: 0
Sound
Karaoke vocal
Enables you to play multi-channel karaoke DVDs. The
karaoke channels on the disc will be mixed into normal
stereo when you choose [On].
Choices: On,
Off
Initial setting:
Off
Clear
Voice
Increases the relative volume
of
dialog for easy listening
atnight. This function is available for only certain multi-
channel discs.
Choices: On,
Off
Initial setting:
Off
13
On-screen menu
480p
Picture
Video shift
Adjusts the position
of
the image on the screen by
scrolling it to the left or right.
Choices: +1 to +7
Initial setting: +4
Saturation
Adjusts the video color saturation. This function is not
available for signals output from COMPONENT video
jacks and HDMI video signals.
Choices:
-7
to +7
Initial setting: 0
Contrast
Accentuates bright and dark parts
of
the video. This
function is not available for signals output from
COMPONENT video jacks and HDMI video signals.
Choices:
-7
to +7
Initial setting: 0
Picture Mode
Adjusts the color tone to suit your preference and the
playing source. [Personal] will be chosen automatically
when you change the value in the following menus:
[Saturation], [Contrast], [Brightness], and [Sharpness].
This function is not available for signals output from
COMPONENT video jacks and HDMI video signals.
Choices: Rich, Natural, Soft, Animation, Personal
Initial setting: Natural
The resolution is automatically selected
to match the monitor you are using.
Auto
Squeezed16:9 Widescreen Auto
16:9 video
(Projector) 4:3 video Widescreen 4:3 PillarBox
*2
Squeezed16:9 4:3 panscan
or
video 4:3letterbox
4:3 4:3 panscan
4:3 video or
4:3letterbox
HDMI Video
Enables you to adjust the resolution depending on the
monitor you are using. You can use this function only
when the HDMI output terminal is connected to a
HDMI-compatible component.
Choices: 480p, 576p, 720p, 1080i, Auto
Initial setting: 480p
Setting Examples
576p Select the desired resolution for the
1-----
7
-2-
0p
----1
monitor you are using. *1
1080i
*:
Refer to the instruction manual
of
the monitor and
choose an appropriate aspect ratio.
*
1:
The HDMI video output may not be displayed
properly
if
the HDMI-compatible monitoryou are using
does not support the selected resolution setting.
To return to the initial setting, you must first stop
playback and eject the disc, then press "PLAY"
~
"0"
~
"2"
~
"9"
~
"STOP" on the remote control.
*2:
If
the desired aspect ratio is not available, select the
most suitable setting from [AUTO], [4:3 PillarBox] and
[NL_Stretch].
Notes:
-While HDMI video signals are being output,
component video output
is
unavailable.
-When avideo setting
is
modified, the picture may not
be displayed
for
several seconds.
-When the image conversion (PAL
+-+
NTSC) begins,
the picture may notbe displayedfor several seconds.
Brightness
Adjusts the overall brightness
of
the picture. This
function is not available for signals output from
COMPONENT video jacks and HDMI video signals.
Choices:
-7
to +7
Initial setting: 0
Sharpness
Adjusts the sharpness
of
the video. This function is not
available for video signals outputfrom the HDMI output
terminal and may have aweak effect on signals output
from the COMPONENT video jacks.
Choices: 0to +7
Initial setting: 0
Sound
Karaoke vocal
Enables you to play multi-channel karaoke DVDs. The
karaoke channels on the disc will be mixed into normal
stereo when you choose [On].
Choices: On,
Off
Initial setting:
Off
Clear
Voice
Increases the relative volume
of
dialog for easy listening
atnight. This function is available for only certain multi-
channel discs.
Choices: On,
Off
Initial setting:
Off
13
On-screen menu
Night
mode
When set to [On], the dynamics
of
the sound output is
optimized. High volume output is softened, enabling
you to watch your favorite action movie without
disturbing others.
Choices: On, Off
Initial setting: Off
Program
You can create your own playlist using this menu. First,
go to [Tracks], then select the tracks/chapters, etc. to
include in your playlist. The programmed playlist will
be activated when you choose [On] in the [Program]
menu.
Clear all
Deletes all Programmed contents.
Program
Set the FTS program playback on or off.
Choices: On, Off
Initial setting: Off
Tracks
Selects tracks and chapters for your FTS list.
Playlist
Shows the programmed FTS list.
Note:
-For details about FTS and the settings
of
[Program}
menu items, see the descriptions followed by "FTS
video/audio program" on page 28.
View
Rotate
Rotates a
IPEG
image.
Choices:
-180
0,
-90
0,0, +900,+1800
Initial setting: 0
Zoom
Activates the zoom function. Acursor will be displayed
on screen. Move the cursorusing the
~
V
<J
[::> buttons,
then select asize by pressing the ENTER button
repeatedly. To exit zoom mode, press RETURN/
RESUME repeatedly until the cursor disappears from
the screen.
Chapterpreview
Plays the first
10
seconds
of
each chapter/track on the
disc. Pressing SCANon the remote control performs the
same function as well.
Choices: On,
Off
Initial setting: Off
14
Angle
Some DVD discs feature amultiple angle function,
enabling you to watch certain scenes from various
angles. Function availability and the number
of
camera
angles vary according to the disc.
Page
Turns pages
of
DVD-Audio still images.
Play
option
DVD Video Mode
Some DVD-Audio discs include DVD-Video contents
that can be played on conventional DVD-Video players.
Toplay such contents, select [On]. The setting returns to
[Off] when you eject adisc or turn the unit to standby
mode.
Choices: On, Off
Initial setting: Off
Audio
Selects the sound format and audio language. Available
choices are determined by the disc.
Disc Navigation
You can direct to atrack, etc. by using this menu.
Subtitle
Selects the subtitle language. Available choices are
determined by the disc.
Search
Frame
by
Frame
Advances orreverses one frame at atime. This function
is available for video discs only. Previous frame is not
available for VCD and SVCD.
Fast
Selects aspeed for fast forward orfast reverse playback.
Choices:
-32,
-8,
-4,
+1, +4, +8, +32
Initial setting: +1
Time
You can move to acertain spot by indicating the elapsed
time.
Slow
Selects aspeed for the slow forward or slow reverse
playback.
Choices:
-1,
-1/2,
-1/4,
-1/8,
0, +1/8, +1/4, +1/2, +1
Initial setting: 0
On-screen menu
Night
mode
When set to [On], the dynamics
of
the sound output is
optimized. High volume output is softened, enabling
you to watch your favorite action movie without
disturbing others.
Choices: On, Off
Initial setting: Off
Program
You can create your own playlist using this menu. First,
go to [Tracks], then select the tracks/chapters, etc. to
include in your playlist. The programmed playlist will
be activated when you choose [On] in the [Program]
menu.
Clear all
Deletes all Programmed contents.
Program
Set the FTS program playback on or off.
Choices: On, Off
Initial setting: Off
Tracks
Selects tracks and chapters for your FTS list.
Playlist
Shows the programmed FTS list.
Note:
-For details about FTS and the settings
of
[Program}
menu items, see the descriptions followed by "FTS
video/audio program" on page 28.
View
Rotate
Rotates a
IPEG
image.
Choices:
-180
0,
-90
0,0, +900,+1800
Initial setting: 0
Zoom
Activates the zoom function. Acursor will be displayed
on screen. Move the cursorusing the
~
V
<J
[::> buttons,
then select asize by pressing the ENTER button
repeatedly. To exit zoom mode, press RETURN/
RESUME repeatedly until the cursor disappears from
the screen.
Chapterpreview
Plays the first
10
seconds
of
each chapter/track on the
disc. Pressing SCANon the remote control performs the
same function as well.
Choices: On,
Off
Initial setting: Off
14
Angle
Some DVD discs feature amultiple angle function,
enabling you to watch certain scenes from various
angles. Function availability and the number
of
camera
angles vary according to the disc.
Page
Turns pages
of
DVD-Audio still images.
Play
option
DVD Video Mode
Some DVD-Audio discs include DVD-Video contents
that can be played on conventional DVD-Video players.
Toplay such contents, select [On]. The setting returns to
[Off] when you eject adisc or turn the unit to standby
mode.
Choices: On, Off
Initial setting: Off
Audio
Selects the sound format and audio language. Available
choices are determined by the disc.
Disc Navigation
You can direct to atrack, etc. by using this menu.
Subtitle
Selects the subtitle language. Available choices are
determined by the disc.
Search
Frame
by
Frame
Advances orreverses one frame at atime. This function
is available for video discs only. Previous frame is not
available for VCD and SVCD.
Fast
Selects aspeed for fast forward orfast reverse playback.
Choices:
-32,
-8,
-4,
+1, +4, +8, +32
Initial setting: +1
Time
You can move to acertain spot by indicating the elapsed
time.
Slow
Selects aspeed for the slow forward or slow reverse
playback.
Choices:
-1,
-1/2,
-1/4,
-1/8,
0, +1/8, +1/4, +1/2, +1
Initial setting: 0
Slide
Show
Use this feature for JPEG slide show playback.
Picture time
Sets the duration for each image.
Choices: Slow, Medium, Fast
Initial setting: Medium
Access
Disc lock
This function enables you to restrict others from
accessing certain discs.
If
this setting is on, you need to enter the four-digit PIN
to modify the [Access] menu settings before you can
play the disc.
Choices: On,
Off
Initial setting:
Off
Change PIN
Enables you to change the four-digit PIN.
To change the four-digit PIN, enterthe current PIN first,
then enter the new four-digit PIN.
Enter PIN
Enter the four-digit PIN to unlock the disc or to display
the [Access] menu.
Parental
level
DVD movies may contain scenes that are unsuitable for
children. Therefore, some discs contain parental control
information that may apply to the entire disc or to
certain scenes. Ratings are country-specific. You can
specify acountry code in the On-screen menu (Setup
-+
Language
-+
Country). See "Country" on page 29.
Choices: 0to 8
Initial setting: 0
Country
Selects acountry to apply its rating system to Parental
Level control.
Features
PSC
AVCD menu screen is displayed when this setting is on.
Choices: On, Off
Initial setting: On
Sleep
tim
er
Places this unit in standby mode when playback is
stopped and this unit is not operate for 20 minutes.
Choices: On, Off
Initial setting:
Off
On-screen menu
TV
TV shape
If
you connect to aconventional 4:3 aspect TV, select
[4:3 panscan] (the left and right sides are trimmed when
you play 16:9 video) or [4:3 letterbox] (black areas
appear at the top and bottom when you play 16:9 video).
Select [Widescreen]
if
you connect to aWide-Screen
TV.
Choices: 4:3 panscan, 4:3 letterbox, Widescreen
Initial setting: 4:3 panscan
TV System (NTSC/PAL conversion)
Allows you to select [PAL], [NTSC] or [Auto] mode to
match your TV system. You can play PAL discs on
NTSC monitor, and NTSC discs on PAL monitor. The
initial setting is [NTSC].
Choices: PAL, NTSC, Auto
The following conversions are supported.
Disc Output format
Format Selected mode
NTSC PAL AUTO
NTSC NTSC
PAL
NTSC
PAL
NTSC
PAL
PAL
Notes:
-In progressive scan mode, the outputsignalsfrom the
VIDEO andSVIDEOjacks are same as theformat
of
the disc you play.
Some image distortion occurs when switching the
NTSC and PAL mode.
If
your
TV
does not accept the selected mode while
you change the
[TV
System} setting, the screen will
be distorted so that you cannot recognize the On-
screen menu. When it occurs, you can change the
[TVSystem} settings by the remote control
operations. Follow the procedures below.
•Choosing [PAL}:
Press "PLAY"
-+
"2"
-+
"5"
-+
"6"
-+
"PLAY"
on the remote control.
•Choosing [NTSC}:
Press "PLAY"
-+
"2"
-+
"5"
-+
"7"
-+
"PLAY"
on the remote control.
Do notperform this operation while playing back a
disc on this unit.
15
Slide
Show
Use this feature for JPEG slide show playback.
Picture time
Sets the duration for each image.
Choices: Slow, Medium, Fast
Initial setting: Medium
Access
Disc lock
This function enables you to restrict others from
accessing certain discs.
If
this setting is on, you need to enter the four-digit PIN
to modify the [Access] menu settings before you can
play the disc.
Choices: On,
Off
Initial setting:
Off
Change PIN
Enables you to change the four-digit PIN.
To change the four-digit PIN, enterthe current PIN first,
then enter the new four-digit PIN.
Enter PIN
Enter the four-digit PIN to unlock the disc or to display
the [Access] menu.
Parental
level
DVD movies may contain scenes that are unsuitable for
children. Therefore, some discs contain parental control
information that may apply to the entire disc or to
certain scenes. Ratings are country-specific. You can
specify acountry code in the On-screen menu (Setup
-+
Language
-+
Country). See "Country" on page 29.
Choices: 0to 8
Initial setting: 0
Country
Selects acountry to apply its rating system to Parental
Level control.
Features
PSC
AVCD menu screen is displayed when this setting is on.
Choices: On, Off
Initial setting: On
Sleep
tim
er
Places this unit in standby mode when playback is
stopped and this unit is not operate for 20 minutes.
Choices: On, Off
Initial setting:
Off
On-screen menu
TV
TV shape
If
you connect to aconventional 4:3 aspect TV, select
[4:3 panscan] (the left and right sides are trimmed when
you play 16:9 video) or [4:3 letterbox] (black areas
appear at the top and bottom when you play 16:9 video).
Select [Widescreen]
if
you connect to aWide-Screen
TV.
Choices: 4:3 panscan, 4:3 letterbox, Widescreen
Initial setting: 4:3 panscan
TV System (NTSC/PAL conversion)
Allows you to select [PAL], [NTSC] or [Auto] mode to
match your TV system. You can play PAL discs on
NTSC monitor, and NTSC discs on PAL monitor. The
initial setting is [NTSC].
Choices: PAL, NTSC, Auto
The following conversions are supported.
Disc Output format
Format Selected mode
NTSC PAL AUTO
NTSC NTSC
PAL
NTSC
PAL
NTSC
PAL
PAL
Notes:
-In progressive scan mode, the outputsignalsfrom the
VIDEO andSVIDEOjacks are same as theformat
of
the disc you play.
Some image distortion occurs when switching the
NTSC and PAL mode.
If
your
TV
does not accept the selected mode while
you change the
[TV
System} setting, the screen will
be distorted so that you cannot recognize the On-
screen menu. When it occurs, you can change the
[TVSystem} settings by the remote control
operations. Follow the procedures below.
•Choosing [PAL}:
Press "PLAY"
-+
"2"
-+
"5"
-+
"6"
-+
"PLAY"
on the remote control.
•Choosing [NTSC}:
Press "PLAY"
-+
"2"
-+
"5"
-+
"7"
-+
"PLAY"
on the remote control.
Do notperform this operation while playing back a
disc on this unit.
15
On-screen menu
Audio Menu
Digital output
Enables you to specify the type
of
digital outputthatbest
suits your AV receiver or HDMI monitor/receiver.
Select [PCM only]
if
your receiver or HDMI monitor/
receiver is not capable
of
decoding multi-channel audio.
Select [All]
if
you connected this unit's digital outjacks
to amulti-channel decoder/receiver.
Choices: Off, PCM only, All
Initial setting: All
Note:
-SA-CD audio signal is not outputfrom DIGITAL
OUTjacks.
Analog output
Enables
you
to specify the type
of
analog output suitable
for your AV receiver.
Choices: Stereo, Dolby
SUIT
Compat, 3D sound,
Multi-channel
Initial setting: Multi-channel
Stereo: In this setting, the multi-channel audio is down-
mixed to astereo signal. Select this setting when
connecting to aTV, stereo amplifier/receiver, etc.
Dolby
SUIT
Compat: Select this setting when using
equipmentwith aDolby Surround Pro Logic decoder. In
this setting, the multi-channel audio (Dolby Digital,
MPEG-2, DTS) is downmixed to aDolby Surround
compatible 2-ch output. SA-CD and PCM signals with
asampling frequency
of
over 88.2 kHz are downmixed
to normal stereo.
3D sound: In asetup without rear speakers (analogue
stereo output), 3D Sound remixes the six channels
of
digital
sUITound
(except for SA-CD and PCM signals
with asampling frequency
of
over 88.2 kHz) into atwo
speaker output while retaining all
of
the original audio
information. The result is the sensation
of
being
surrounded by multiple speakers.
Multi-channel: Select this setting when using amulti-
channel AV receiver with 6-ch discrete inputs. The
multi-channel audio signals those
of
like DVD-Audio,
DVD-Video, and SA-CD are output from the respective
6-ch discrete outputjacks. In this mode, this unit will
perform DTS decoding, Dolby Digital 5. I-channel
decoding, or MPEG Multichannel decoding when
applicable, and Dolby Pro Logic II decoding on 2-ch
sound tracks except for SA-CD and PCM signals with a
sampling frequency
of
over 88.2 kHz.
16
PCMoutput
Enables you to select PCM digital output at 48 kHz or
96 kHz.
If
you select [48 KHz], PCM data will be
converted to 2-ch 48 kHz orless. Select [48 KHz]
if
the
connected equipment cannot process signals with a
sampling frequency
of
96 kHz
or
88.2 kHz.
Choices: 96 KHz, 48 KHz
Initial setting: 96 KHz
Notes:
-Signals are converted to either 48 kHz
or
44.1 kHz
despite the above settings ifthe disc has copy
protection.
-
If
you select [96 KHz}, signals with asampling
frequency
of
over 96 kHz are converted to 2-ch
88.2 kHz
or
96 kHz.
SA-CD Direct
Enables you (with asuitable speaker system) to bypass
the bass management system for multi-channel SA-CD
playback, so you can enjoy the pure SA-CD quality.
Choices: On, Off
Initial setting: Off
Note:
-When [SA-CD Direct}
is
[On}, the speaker settings
will not be applied during SA-CD playback.
HDMIAudio
If
you are not using HDMI audio output, you should set
this to [Off].
If
the monitor/receiver connected to this unit using
HDMI does not support HDMI audio signal input, set
this to [Off].
Choices: On, Off
Initial setting: Off
Notes:
-SuperAudio CD signals cannot be output using
HDMI.
-This unitcan outputthefollowing audio signals using
HDMI: 32/44.1/48 kHz, 2-ch
PCM
signals and
bitstream signals (Dolby Digital, DTS andMPEG).
PCM
signals with asamplingfrequency
of
over
88.2 kHz are converted to 2-ch 48 kHz
or
44.1 kHz.
-When audio signals are being output by aHDMI-
component, digital output signals are muted.
On-screen menu
Audio Menu
Digital output
Enables you to specify the type
of
digital outputthatbest
suits your AV receiver or HDMI monitor/receiver.
Select [PCM only]
if
your receiver or HDMI monitor/
receiver is not capable
of
decoding multi-channel audio.
Select [All]
if
you connected this unit's digital outjacks
to amulti-channel decoder/receiver.
Choices: Off, PCM only, All
Initial setting: All
Note:
-SA-CD audio signal is not outputfrom DIGITAL
OUTjacks.
Analog output
Enables
you
to specify the type
of
analog output suitable
for your AV receiver.
Choices: Stereo, Dolby
SUIT
Compat, 3D sound,
Multi-channel
Initial setting: Multi-channel
Stereo: In this setting, the multi-channel audio is down-
mixed to astereo signal. Select this setting when
connecting to aTV, stereo amplifier/receiver, etc.
Dolby
SUIT
Compat: Select this setting when using
equipmentwith aDolby Surround Pro Logic decoder. In
this setting, the multi-channel audio (Dolby Digital,
MPEG-2, DTS) is downmixed to aDolby Surround
compatible 2-ch output. SA-CD and PCM signals with
asampling frequency
of
over 88.2 kHz are downmixed
to normal stereo.
3D sound: In asetup without rear speakers (analogue
stereo output), 3D Sound remixes the six channels
of
digital
sUITound
(except for SA-CD and PCM signals
with asampling frequency
of
over 88.2 kHz) into atwo
speaker output while retaining all
of
the original audio
information. The result is the sensation
of
being
surrounded by multiple speakers.
Multi-channel: Select this setting when using amulti-
channel AV receiver with 6-ch discrete inputs. The
multi-channel audio signals those
of
like DVD-Audio,
DVD-Video, and SA-CD are output from the respective
6-ch discrete outputjacks. In this mode, this unit will
perform DTS decoding, Dolby Digital 5. I-channel
decoding, or MPEG Multichannel decoding when
applicable, and Dolby Pro Logic II decoding on 2-ch
sound tracks except for SA-CD and PCM signals with a
sampling frequency
of
over 88.2 kHz.
16
PCMoutput
Enables you to select PCM digital output at 48 kHz or
96 kHz.
If
you select [48 KHz], PCM data will be
converted to 2-ch 48 kHz orless. Select [48 KHz]
if
the
connected equipment cannot process signals with a
sampling frequency
of
96 kHz
or
88.2 kHz.
Choices: 96 KHz, 48 KHz
Initial setting: 96 KHz
Notes:
-Signals are converted to either 48 kHz
or
44.1 kHz
despite the above settings ifthe disc has copy
protection.
-
If
you select [96 KHz}, signals with asampling
frequency
of
over 96 kHz are converted to 2-ch
88.2 kHz
or
96 kHz.
SA-CD Direct
Enables you (with asuitable speaker system) to bypass
the bass management system for multi-channel SA-CD
playback, so you can enjoy the pure SA-CD quality.
Choices: On, Off
Initial setting: Off
Note:
-When [SA-CD Direct}
is
[On}, the speaker settings
will not be applied during SA-CD playback.
HDMIAudio
If
you are not using HDMI audio output, you should set
this to [Off].
If
the monitor/receiver connected to this unit using
HDMI does not support HDMI audio signal input, set
this to [Off].
Choices: On, Off
Initial setting: Off
Notes:
-SuperAudio CD signals cannot be output using
HDMI.
-This unitcan outputthefollowing audio signals using
HDMI: 32/44.1/48 kHz, 2-ch
PCM
signals and
bitstream signals (Dolby Digital, DTS andMPEG).
PCM
signals with asamplingfrequency
of
over
88.2 kHz are converted to 2-ch 48 kHz
or
44.1 kHz.
-When audio signals are being output by aHDMI-
component, digital output signals are muted.
Other manuals for DVD-S2500
4
Table of contents
Other Yamaha Media Player manuals
Yamaha
Yamaha TSX-112 User manual
Yamaha
Yamaha RX-Z11 - AV Receiver Use and care manual
Yamaha
Yamaha MCX-RC100 User manual
Yamaha
Yamaha DISKLAVIER E3 CLASSIC User manual
Yamaha
Yamaha NP-S303 User manual
Yamaha
Yamaha CD-N500 User manual
Yamaha
Yamaha NP-S303 User manual
Yamaha
Yamaha MCX-A300 User manual
Yamaha
Yamaha MCX-P200 User manual
Yamaha
Yamaha MCX-P200 User manual
Popular Media Player manuals by other brands
T+A
T+A Cala user manual
Aerial Industries
Aerial Industries AIHT652 Installation
Western Digital
Western Digital WD00AVN - TV HD Media Player Quick install guide
Telefunken
Telefunken TF-DVBT219 instruction manual
Grace Digital Audio
Grace Digital Audio GDI-IR3020 user guide
Custom Audio Electronics
Custom Audio Electronics MicroPlayer user manual
