Step 2
Hand tighten. Next attach the left and right
rear axle braces using (4) M8x20 hex head bolts,
(4) M8 lock nuts, and (4) M8 washers.
Tighten all nuts securely.
Step 1
Turn the cart bed upside down. Use the card-
board from the carton to keep from scratching
or damaging the finish.
Step 3
.
Assemble the rear support assembly to the
back of the bed using (2) M8x40 hex head
bolts, (2) M8 lock nuts, and (2) M8 washers.
The front support assembly is mostly pre-assembled at the factory. Please make
sure all bolts and nuts assembled at the factory are tight. Assemble the front axle
support by sliding the arms onto the support rod and secure by using a M10 washer
and cotter pin.
A. Attach the front axle support to the
bed of the cart using (2) M8x40 hex
head bolts, (2) M8 lock nuts, and
(2) M8 washers.
B. Secure the center front axle brace
to the bed of the cart using (2) M8x20
hex head bolts, (2) 8mm lock nuts, and
(2) M8 washers.
Step 6
Turn the cart upright onto its wheels.
Step 4
Step 5
Install the wheels in the following order:
1. Place the wheel spacers onto the axles.
2. Place the wheels onto the axles with the valve stem facing out.
3. Use the M16 washers and the cotter pins to secure the wheels.
Important Safety Instructions
Assembly Instructions
Tools required for assembly: pliers, adjustable wrenches and/or metric socket set
NOTE: During each step of assembly, assemble all hardware and hand tighten.
Once all the hardware is installed for that particular step, tighten all hardware.
1. READ ALL INSTRUCTIONS CAREFULLY BEFORE USE. If you do notunderstand
these instructions, need clarification or further explanation, please call our toll
free answer line for assistance at 1-800-867-6763. Monday through Friday 9:00
a.m. until 4 :00 p.m. CST.
2. Do not exceed the overall maximum load capacity of 400 lbs (181 kg).The weight
rating is based on an evenly distributed load.
3. Do not load items on the top edges of the panels. Remove panels before loading
oversized items.
4. Do not allow children to use this cart without supervision. This cart is not a toy.
5. Do not use this cart to transport passengers.
6. This cart is not intended for highway use.
7. Do not exceed 5 mph.
8. If any parts become damaged, broken or misplaced, do not use the cart until
replacement parts have been obtained.
9. Do not use the cart on surfaces or for transporting objects that can cause
damage to the pneumatic tires or tubes. Do not inflate the tires to more
than 30 PSI (2.07 BAR).
10. It is recommended that the cart be inspected for damage before each use.
11. KEEP THESE INSTRUCTIONS FOR FURTHER REFERENCE.
Your cart requires assembly. Account for all parts and hardware before beginning
assembly. If any parts are missing, damaged or if you have questions or need
additional instructions DO NOT RETURN THIS PRODUCT TO THE RETAILER, visit us
online at www.tricam.com to complete the replacement parts submission form or call
our customer service department at 1-800-867-6763.
