YASKAWA SI-M3/V User manual

CompoNet通信
V1000オプションユニット
取扱説明書
形式 SI-M3/V
CompoNet
YASKAWA AC Drive-V1000 Option
Installation Manual
Type SI-M3/V
To properly use the product, read this manual thoroughly and retain
for easy reference, inspection, and maintenance. Ensure the end user
receives this manual.
製品を安全にお使い頂くために，本書を必ずお読みください。
また，本書をお手元に保管していただくとともに，最終的に本製品をご使用になる
ユーザー様のお手元に確実に届けられるよう，お取り計らい願います。
MANUAL NO. TOBP C730600 54A

2YASKAWA ELECTRIC TOBP C730600 54A V1000 Option CompoNet Installation Manual
Copyright © 2010YASKAWA ELECTRIC CORPORATION
All rights reserved. No part of this publication may be reproduced, stored in a retrieval
system, or transmitted, in any form or by any means, mechanical, electronic, photocopying,
recording, or otherwise, without the prior written permission of Yaskawa. No patent liability
is assumed with respect to the use of the information contained herein. Moreover, because
Yaskawa is constantly striving to improve its high-quality products, the information
contained in this manual is subject to change without notice. Every precaution has been
taken in the preparation of this manual. Yaskawa assumes no responsibility for errors or
omissions. Neither is any liability assumed for damages resulting from the use of the
information contained in this publication.

YASK AWA EL ECT RI C TOBP C730600 54A V1000 Option CompoNet Installation Manual 3
Table of Contents
1 PREFACE AND SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2 PRODUCT OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3 RECEIVING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4 OPTION COMPONENTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
5 INSTALLATION PROCEDURE . . . . . . . . . . . . . . . . . . . . . . .16
6 RELATED PARAMETERS . . . . . . . . . . . . . . . . . . . . . . . . . . 28
7 TROUBLESHOOTING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
8 CONFIGURING COMPONET MESSAGING. . . . . . . . . . . . . 34
9 SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

4 YASKAWA ELECTRIC TOBP C730600 54A V1000 Option CompoNet Installation Manual
1 Preface and Safety
1 Preface and Safety
Yaskawa manufactures products used as components in a wide variety of industrial systems
and equipment. The selection and application of Yaskawa products remain the responsibility
of the equipment manufacturer or end user. Yaskawa accepts no responsibility for the way its
products are incorporated into the final system design. Under no circumstances should any
Yaskawa product be incorporated into any product or design as the exclusive or sole safety
control. Without exception, all controls should be designed to detect faults dynamically and
fail safely under all circumstances. All systems or equipment designed to incorporate a
product manufactured by Yaskawa must be supplied to the end user with appropriate
warnings and instructions as to the safe use and operation of that part. Any warnings
provided by Yaskawa must be promptly provided to the end user. Yaskawa offers an express
warranty only as to the quality of its products in conforming to standards and specifications
published in the Yaskawa manual. NO OTHER WARRANTY, EXRESS OR IMPLIED, IS
OFFERED. Yaskawa assumes no liability for any personal injury, property damage, losses,
or claims arising from misapplication of its products.

1 Preface and Safety
YASKAWA ELECTRIC TOBP C730600 54A V1000 Option CompoNet Installation Manual 5
◆Applicable Documentation
The following manuals are available for the CompoNet option:
◆Terms
◆Registered Trademarks
• CompoNet is a trademark of the ODVA.
• All trademarks are the property of their respective owners.
CompoNet Option
Yaskawa AC Drive V1000-Series Option
SI-M3/V CompoNet Installation Manual
Manual No: TOBP C730600 54
Read this manual first.
The installation manual is packaged with the
option and contains information required to
install the option and set up related drive
parameters.
Yaskawa AC Drive V1000-Series Option
SI-M3/V CompoNet Technical Manual
Manual No: SIEP C730600 54
The technical manual contains detailed
information about the option. In the U.S.,
access http://www.yaskawa.com to obtain the
technical manual. Customers in other areas
should contact a Yaskawa representative.
Yaskawa Drive
Yaskawa AC Drive
V1000 Quick Start Guide
The drive manuals cover basic installation,
wiring, operation procedures, functions,
troubleshooting, and maintenance information.
The manuals also include important
information about parameter settings and drive
tuning. Access these sites to obtain Yaskawa
instruction manuals:
U.S.: http://www.yaskawa.com
Europe: http://www.yaskawa.eu.com
Japan: http://www.e-mechatronics.com
Other areas: contact a Yaskawa representative.
For questions, contact your local Yaskawa
sales office or the nearest Yaskawa
representative.
Yaskawa AC Drive
V1000 Technical Manual
Note: Indicates supplemental information that is not related to safety messages
Drive: Yaskawa AC Drive V1000-Series
Option: Yaskawa AC Drive V1000-Series SI-M3/V CompoNet Option
≥1020: Indicates a drive feature or function that is only available in drive software version 1020 or greater
STOP
(Hz)
(Hz)
(A)
(V)










V1000
๟ᵄᢙᜰ઎
ᱜォㅒォㆬᛯ
಴ജ๟ᵄᢙ
಴ജ㔚ᵹ
಴ജ㔚࿶
ࡕ࠾࠲
ࡌ࡝ࡈࠔࠗ
࠮࠶࠻ࠕ࠶ࡊ
ࡄ࡜ࡔ࡯࠲⸳ቯ
ࠝ࡯࠻࠴ࡘ࡯࠾ࡦࠣ
ᝪ߃ઃߌޔㆇォߩ೨ߦߪᔅߕขᛒ⺑᣿ᦠࠍ⺒߻ߎߣޕ
ㅢ㔚߅ࠃ߮㔚Ḯㆤᢿᓟ
5
ಽએౝߪࡈࡠࡦ࠻ࠞࡃ࡯ࠍ
ᄖߐߥ޿ߎߣޕ
400V
⚖ࠗࡦࡃ࡯࠲ߩ႐วߪޔ㔚Ḯߩᕈὐ߇ធ࿾
ߐࠇߡ޿ࠆߎߣࠍ⏕⹺ߔࠆߎߣޕ㧔ޓޓኻᔕ㧕
ߌ߇㧚ᗵ㔚ߩ߅ߘࠇ߇޽ࠅ߹ߔޕ
ෂޓ㒾

1 Preface and Safety
6YASKAWA ELECTRIC TOBP C730600 54A V1000 Option CompoNet Installation Manual
◆Supplemental Safety Information
Read and understand this manual before installing, operating, or servicing this option. Install
the option according to this manual and local codes.
The following conventions indicate safety messages in this manual. Failure to heed these
messages could cause fatal injury or damage products and related equipment and systems.
DANGER
Indicates a hazardous situation, which, if not avoided, will result in death or serious
injury.
WARNING
Indicates a hazardous situation, which, if not avoided, could result in death or
serious injury.
CAUTION
Indicates a hazardous situation, which, if not avoided, could result in minor or
moderate injury.
NOTICE
Indicates an equipment damage message.

1 Preface and Safety
YASKAWA ELECTRIC TOBP C730600 54A V1000 Option CompoNet Installation Manual 7
■General Safety
General Precautions
• The diagrams in this book may include options and drives without covers or safety shields to illustrate details. Be
sure to reinstall covers or shields before operating any devices. Use the option according to the instructions
described in this manual.
• Any illustrations, photographs, or examples used in this manual are provided as examples only and may not apply
to all products to which this manual is applicable.
• The products and specifications described in this manual or the content and presentation of the manual may be
changed without notice to improve the product and/or the manual.
• When ordering new copies of the manual, contact a Yaskawa representative or the nearest Yaskawa sales office and
provide the manual number shown on the front cover.
DANGER
Heed the safety messages in this manual.
Failure to comply will result in death or serious injury.
The operating company is responsible for any injuries or equipment damage resulting
from failure to heed the warnings in this manual.
NOTICE
Do not expose the drive or option to halogen group disinfectants.
Failure to comply may cause damage to the electrical components in the option.
Do not pack the drive in wooden materials that have been fumigated or sterilized.
Do not sterilize the entire package after the product is packed.
Do not modify the drive or option circuitry.
Failure to comply could result in damage to the drive or option and will void warranty.
Yaskawa is not responsible for any modification of the product made by the user. This
product must not be modified.

1 Preface and Safety
8YASKAWA ELECTRIC TOBP C730600 54A V1000 Option CompoNet Installation Manual
■Option Unit Warning Labels
Warning information is displayed on the option unit as shown in the figure below. Follow all
warnings and safety instructions when using the product.
When using the drive in an area that may require displaying warning information in
Japanese or Chinese, a warning label is provided with the option. This label can be placed
over the English and French warnings on the front of the option.
■Warning Contents
V1000
Warning
information
AVERTISSEMENT
Lire le manuel avant l'installation.
Attendre 5 minutes apres la coupure de l'alimentation,
pour permettre la decharge des condensateurs.
Pour repondre aux exigences , s assurer que le
neutre soit relie a la terre, pour la serie 400V.
WARNING
Read manual before installing.
Wait 5 minutes for capacitor discharge after
disconnecting power supply.
To conform to ޓrequirements, make sure
to ground the supply neutral for 400V class.
Risk of electric shock.
Risque de decharge
electrique.
AVERTISSEMENT
Lire le manuel avant l'installation.
Attendre 5 minutes apres la coupure de l'alimentation,
pour permettre la decharge des condensateurs.
Pour repondre aux exigences , s assurer que le
neutre soit relie a la terre, pour la serie 400V.
WARNING
Read manual before installing.
Wait 5 minutes for capacitor discharge after
disconnecting power supply.
To conform to ޓrequirements, make sure
to ground the supply neutral for 400V class.
Risk of electric shock.
Risque de decharge
electrique.

YASKAWA ELECTRIC TOBP C730600 54A V1000 Option CompoNet Installation Manual 9
2 Product Overview
2 Product Overview
◆About This Product
The CompoNet option provides a communications connection between the drive and an
ODVA CompoNet network. The SI-M3/V CompoNet Option connects the drive to a
CompoNet network and facilitates the exchange of data.
This manual explains the handling, installation and specifications of this product.
CompoNet is a communications link to connect industrial devices (such as sensors and
variable frequency drives) as well as masters (such as programmable controllers) to a CIP
network.
By installing the CompoNet Option to a drive, it is possible to do the following from a
CompoNet master device:
• operate the drive
• monitor the operation status of the drive
• change parameter settings.
◆Applicable Models
The CompoNet Option can be used with the drive models in Table 1 .
Table 1 Applicable Models
Drive Software Version <1>
<1> See “PRG” on the drive nameplate for the software version number.
CIMR-VAAA≥1020
CIMR-VABA≥ 1020
CIMR-VAFA≥ 1020

10 YASKAWA ELECTRIC TOBP C730600 54A V1000 Option CompoNet Installation Manual
3 Receiving
3 Receiving
Please perform the following tasks after receiving the option:
• Inspect the option for damage. Contact the shipper immediately if the option appears
damaged upon receipt.
• Verify receipt of the correct model by checking the model number printed on the option
nameplate ( Refer to Top Views of Option on page 11 for nameplate positioning).
• Contact your supplier if you have received the wrong model or the option does not
function properly.
◆Option Package Contents
◆Tools Required for Installation
A Phillips screwdriver (M3 metric/#1, #2 U.S. standard size*) is required to install the
option and remove drive front covers.
*Screw sizes vary by drive capacity. Select a screwdriver appropriate for the drive capacity.
Note: Tools and parts required to prepare option networking cables for wiring are not listed in this
manual. Refer to the ODVA website for more information.
Description: Option Unit Ground Wire Warning Labels Installation Manual
_
Quantity: 1411
MANUAL